Topic: reinstalling cam, timing question

[Burnboy]

SO im buttoning her back up and had a question about the cam. When I reinstall it what do I need to look out for? As long as I line it up can i do all my timing later with the motor installed in the bike, or is this the time to get things right?
-75 cb750

[Gordon]

It needs to be set properly when installed.  The manual will walk you through the procedure to get it set right. 

[MRieck]

Are you using a slotted sprocket? All cam timing needs to be done prior to installation UNLESS you have Gordon's frame kit (or a bogus, POS, early facsimile).

[Gordon]

All cam timing needs to be done prior to installation UNLESS you have Gordon's frame kit

For those who don't already know, that's the other Gordon, not me. 

I get the occasional PM asking about "my 750 frame kits", which I politely direct towards Ilbikes.

[MRieck]

All cam timing needs to be done prior to installation UNLESS you have Gordon's frame kit

For those who don't already know, that's the other Gordon, not me. 

I get the occasional PM asking about "my 750 frame kits", which I politely direct towards Ilbikes.

Sorry Gordo....I forgot about that. Mike

[Burnboy]

heres a printable degree wheel i found if it helps anyone