Author Topic: 75 cb750k cafe project begins 2/25 new pics  (Read 6912 times)

0 Members and 1 Guest are viewing this topic.

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #25 on: January 21, 2009, 07:01:40 PM »
got everything off, should I and if so how do i clean the tops of the pistons?..
1975 CB750
1973 CB350F

Offline J.Webster Designs

  • Expert
  • ****
  • Posts: 941
  • www.JWebsterDesigns.com
    • www.JWebsterDesigns.com
Re: 75 cb750k cafe project begins
« Reply #26 on: January 21, 2009, 07:12:20 PM »
i would clean them. thats what i did. get yourself a brass wire wheel that you can chuck up in your drill. cover up any places that debris can get into and go to town make sure you clean up good after. a little simple green can help as well. but i didnt need to.
VISIT OUR WEBSITE!

www.JWebsterDesigns.com

FOLLOW US ON SOCIAL MEDIA!

Facebook:
www.facebook.com/JWebsterDesigns

Instagram:
www.instagram.com/j.websterdesigns

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #27 on: January 21, 2009, 07:38:46 PM »
cool i got 2 and 3 cleaned. how do i crank it over to get to 1 and 4? I used the kick star to get these to the top but now it wont turn any more.
1975 CB750
1973 CB350F

Offline J.Webster Designs

  • Expert
  • ****
  • Posts: 941
  • www.JWebsterDesigns.com
    • www.JWebsterDesigns.com
Re: 75 cb750k cafe project begins
« Reply #28 on: January 21, 2009, 07:52:06 PM »
get the cam chain out of that hole. if you havent already. its most likely keeping it from turning. if it rotated to get 2 and 3 to the top then it should rotate no problem to get 1 and 4 up
VISIT OUR WEBSITE!

www.JWebsterDesigns.com

FOLLOW US ON SOCIAL MEDIA!

Facebook:
www.facebook.com/JWebsterDesigns

Instagram:
www.instagram.com/j.websterdesigns

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #29 on: January 21, 2009, 08:25:17 PM »
the roller on my tensioner has notches in it  from where the chain interlocks with it, does this mean time for replacement?
got the pistons exposed now, do i need to be careful from leaving these exposed over night?
1975 CB750
1973 CB350F

Offline J.Webster Designs

  • Expert
  • ****
  • Posts: 941
  • www.JWebsterDesigns.com
    • www.JWebsterDesigns.com
Re: 75 cb750k cafe project begins
« Reply #30 on: January 21, 2009, 08:33:39 PM »
i would cover the motor. sounds like you need a new roller as well. any closer pics of it?
VISIT OUR WEBSITE!

www.JWebsterDesigns.com

FOLLOW US ON SOCIAL MEDIA!

Facebook:
www.facebook.com/JWebsterDesigns

Instagram:
www.instagram.com/j.websterdesigns

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #31 on: January 21, 2009, 08:41:31 PM »
kinda weird picture but my camera suck so i inverted the colors. the dark spots are high spots the would interlock into the chain like the teeth on a gear.
1975 CB750
1973 CB350F

Offline J.Webster Designs

  • Expert
  • ****
  • Posts: 941
  • www.JWebsterDesigns.com
    • www.JWebsterDesigns.com
Re: 75 cb750k cafe project begins
« Reply #32 on: January 22, 2009, 06:40:26 AM »
yeah i cant tell anything from that picture...
VISIT OUR WEBSITE!

www.JWebsterDesigns.com

FOLLOW US ON SOCIAL MEDIA!

Facebook:
www.facebook.com/JWebsterDesigns

Instagram:
www.instagram.com/j.websterdesigns

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #33 on: February 25, 2009, 02:10:40 PM »
so after a long delay....
got the motor painted and polished up, knee dents in place and tank painted. frame painted and motor reinstalled, here are some mock up pictures.
1975 CB750
1973 CB350F

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: 75 cb750k cafe project begins
« Reply #34 on: February 25, 2009, 02:14:55 PM »
paint came out pretty good for a rattle can. Im happy with the way the motor came out as well.

AS of now im just waiting on a few parts to come in. Ive got 16x5 rim for the rear and 16x3 rim for the front. Waiting on the spoke kits from sas. Took the forks apart last night, gonna polish them and maybe paint the fork tubes, they were pretty bad off, discovered my front brake was held on by one bold and some glue, haha. Was going to replace the rear wheel bearings but looks as if they were replaced fairly recently. rear hub is polishes as well. Gonna start on the steering bearings tonight hopefully. Bondoed the oil tank for a smooth look. As soon as my handlebar controls come in I can attach them to my clubmans and hopefully get it started within a week.
1975 CB750
1973 CB350F