« previous next »
Pages: [1]   Go Down

Author Topic: CB350 Exhaust on CL350 Bike?  (Read 1594 times)

0 Members and 1 Guest are viewing this topic.

Offline OakBehringer

  • Hot Shot
  • ***
  • Posts: 447
CB350 Exhaust on CL350 Bike?
« on: February 26, 2009, 11:58:24 AM »
Quick question - Everything I read leads me to believe that any CB350 exhaust - oem and aftermarket - should be a direct bolt-on for an CL350. Am I correct to assume this?

Thanks,
Adam

p.s. already posted this on the hondatwins forum, but didn't get a response. I apologize to anyone who may read this twice.
Logged
1974 350 Four - SOLD
1966 CL160
1981 XS650
1972 CT70

Finished CB350F

HELLS BANANAS

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: CB350 Exhaust on CL350 Bike?
« Reply #1 on: February 26, 2009, 12:14:19 PM »
Sorry - I didn't see your question over there.
You should be able to do that with no real problem...
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline OakBehringer

  • Hot Shot
  • ***
  • Posts: 447
Re: CB350 Exhaust on CL350 Bike?
« Reply #2 on: February 26, 2009, 12:16:44 PM »
Yea, should bolt onto the motor with no problem. I'm not sure how the cb exhaust mounts to the frame... unsure if the CL frame would have the same stuff.
Logged
1974 350 Four - SOLD
1966 CL160
1981 XS650
1972 CT70

Finished CB350F

HELLS BANANAS

Offline cafe750

  • Hot Shot
  • ***
  • Posts: 583
  • If you can't fix it with a hammer, it's electrical
Re: CB350 Exhaust on CL350 Bike?
« Reply #3 on: February 26, 2009, 02:35:30 PM »
You may have some interference with the footpegs, other than that, I think it's a straight bolt on....
Logged
"It's an old motorcycle, the wind is supposed to blow your head around, it's supposed to leak oil, the brakes should suck, and every now and then, it should scare you so bad you piss your pants."



Roy, Washington

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: CB350 Exhaust on CL350 Bike?
« Reply #4 on: February 26, 2009, 02:36:30 PM »
CB and CL footpeg mounts are different. CB has room for a pipe between the frame and peg. A CL does not.
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50
Pages: [1]   Go Up
« previous next »