You can, raise your foks your self..... I think.
Get a bunch of wood blocks and 3/4 in plywood shims.or 1/2 in.
Blocks have to be big enought & flat enough to not wobble
Bike is on stand (I assume no C-stand),on thert sde by tour ftont motor mount under the points, put a pile of block till it just touches the frame.. tight
Now go to the kickstand and place a 2x4 beside it..
Now it gets a bit tricky, you grab the lft bat and the main footpeg or the frame right behind the shock mounts.
Then GGGRRRUUUUUUUNNNTTT & LLLIIIFFTTT..

Swearing helps, now kick in the 2x4 under the sidestand.
Now the front end should be coming off the ground, to get it higher just ad 1/2 inch shims(or whatever you can handle/lift) under each side.
Betcha can do it.

A lot of us have out fave blocks.. one on the right, grunt it up, kick the other(correct size) under the left side, & work on chain ,wheel, brake, etc..