Author Topic: Indoor Storage/Rebuild  (Read 3328 times)

0 Members and 1 Guest are viewing this topic.

Offline ASCSurveyor

  • Knee-Blaster
  • Full Member
  • *
  • Posts: 84
  • Bikes: '05 SV645, '77 CB750K
Indoor Storage/Rebuild
« on: January 29, 2009, 04:32:27 PM »
So I've decided that I'm sick of looking at my CB under the cover out in the parking lot, and since the SV is down (with no clue of what's wrong with it), I've taken the most rational course of action, and decided to move the CB inside.

I live in an apartment, on the 2nd floor.  Staircase is strait up, no turns. 

Obviously I'll want to remove all the fluids, and anything else that might be considered "hazerdous".  Then probably bring it up piece by piece, since I'm guessing the entire bike will be just too heavy to push up the stairs, even with a ramp.

Has anyone ever done this before?  I have no schedule for getting the bike done, but just hate seeing it sit out there in the elements.  Figure I can begin replacing things here and there.  Plus, it'll make a great centerpiece in my sh-thole apartment.   :P

'77 750K Rebuild Blog
--------------------------
http://mikeshondacb.blogspot.com/

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: Indoor Storage/Rebuild
« Reply #1 on: January 29, 2009, 05:07:55 PM »
You may get it up in pieces, but wouldn't you be wanting to bring it back out in one?

Just make sure the exit strategy is in place ;D

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: Indoor Storage/Rebuild
« Reply #2 on: January 29, 2009, 05:48:51 PM »
got a balcony or fire escape?  build a pulley and hoist er up!

Offline Mach-5(50)

  • Enthusiast
  • **
  • Posts: 103
    • ryan barr photography
Re: Indoor Storage/Rebuild
« Reply #3 on: January 30, 2009, 12:09:47 PM »
maybe a come-a-long if the cable is long enough to get it up, or you can use a pulley system to let it down slowly in one piece maybe.
The more adults I meet, the more I want to help kids.

i used to be drunk and dirty,
now i am clean and sober.

http://www.ryanbarrphotography.com

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Indoor Storage/Rebuild
« Reply #4 on: January 30, 2009, 01:21:45 PM »
I would lay down some plywood on the stairs nad get a couple of buddies to help push it up. Then use the brakes to help get it down.

Then again I loaded mine into a truck with no ramps... so I'm kinda stupid. ::)
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline DaytonGuy

  • Enthusiast
  • **
  • Posts: 231
Re: Indoor Storage/Rebuild
« Reply #5 on: January 31, 2009, 01:16:46 PM »
I took mine apart piece by piece and took it into the basement.  I'll reassemble outside int he spring.  It should take more than a couple weekends to get it back together.....I hope. :o

Offline CaféElite

  • Expert
  • ****
  • Posts: 808
  • 1975 CB550
Re: Indoor Storage/Rebuild
« Reply #6 on: January 31, 2009, 02:47:57 PM »
I agree w/ the comment about getting your buddies to help you push it up. The only reasonable exit plan in my opinion would be to ride that bad girl down the stairs.  ;D
CB550's
Kansas City..

Religion is like masturbation, do it at home and keep it to yourself

Offline babyfood1217

  • The only way to drink espresso is as a
  • Hot Shot
  • ***
  • Posts: 432
  • I miss my baby...
Re: Indoor Storage/Rebuild
« Reply #7 on: January 31, 2009, 04:55:42 PM »
Well, when I shoehorned my 750 into my back porch at my old house ( http://forums.sohc4.net/index.php?topic=30469 ), I had to go up a 1/3 flight of rotting wooden steps, and manage a 90 degree turn in a space no larger than my little toe.  I ended up using everything I could find as a ramp (wood planks ontop of a ladder, a hollow steel door, another rotten wood plank), but when all was said and done, having a buddy or two made it the bees' knees.  Exit strategy?  Animal House style (or a couple friends with ropes and you at the brakes.  G'luck.  Take pics (or video :) )

-Chris

I need help moving my project bike from Wisconsin to Seattle, WA.  Willing to pay well.  Contact if interested.

SOHC member: #438

Project: 1976 CB750K
GSXR forks, Monoshock Rear end, 836 in progress, RC51 pipes, custom frame and everything else.

Offline luder

  • Hot Shot
  • ***
  • Posts: 406
Re: Indoor Storage/Rebuild
« Reply #8 on: January 31, 2009, 06:58:55 PM »
Dude that sounds like work...later luder

Offline 547

  • Hot Shot
  • ***
  • Posts: 295
Re: Indoor Storage/Rebuild
« Reply #9 on: January 31, 2009, 07:43:44 PM »
Just the other day I took my cb450 through a few inches of snow, up an old wooden ironing board I found in my basement, then into my kitchen to thaw out. After a night of warming up, it only took about three hours to strip it to the frame to carry it all into my basement (that includes making dinner for the kids). I left the forks, shocks, and swing arm on so it was still kind of heavy to carry by myself. Your best bet I would say is to disassemble to get it up the stairs and again to get it down.
It's a little work but much safer than the alternative.
j-

Offline Steve_K

  • Expert
  • ****
  • Posts: 923
Re: Indoor Storage/Rebuild
« Reply #10 on: February 01, 2009, 09:47:57 AM »
I have moved several bikes up and down stairs.  Takes 3 guys,  Tie a rope around the forks and give to the strongest guy and the other two push and guide the bike up.   Provide beer and you are done.
Steve_K
Steve_K

76 CB 550, 73CB750, 86 GSX-R750, 16 Slingshot
Old rides:305 Honda, CL350, 74 CB550
 05 SV1000S, 88 CBR600,92 VFR, 88 Hawk GT, 96 Ducati 900SS, 98 Kaw ZX6R, SV650

Offline XN

  • Hot Shot
  • ***
  • Posts: 264
Re: Indoor Storage/Rebuild
« Reply #11 on: February 02, 2009, 01:52:30 AM »
3-4 guys roll it on up... Friend of mine built his harley in his basement. Had everything on but the bars and controls. Tied a rope around the forks 2 guys in front 2 in back and she was out in no time...
78 Honda CB750K
02 Yamaha V-star 650
02 Honda VTX 1800

Offline Jinxracing

  • It's hot shit, not
  • Hot Shot
  • ***
  • Posts: 610
  • '70 CB750 K1
    • The Hairy Nickel
Re: Indoor Storage/Rebuild
« Reply #12 on: February 02, 2009, 02:12:21 AM »
One other option you probably don't want to consider...


I tried like hell to find footage of D-Day riding up the stairs in Animal House, but no luck. :D
"Each of us can find a maggot in our past which will happily devour our futures."

–Captain Horatio Hornblower

www.thehairynickel.com

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Indoor Storage/Rebuild
« Reply #13 on: February 02, 2009, 04:42:00 AM »
If you remove the engine and handlebars first it will make it much easier.

good luck
Andy

Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline Tom in Newcastle......Ontario

  • Hot Shot
  • ***
  • Posts: 522
  • Newcastle Ontario
Re: Indoor Storage/Rebuild
« Reply #14 on: February 02, 2009, 07:10:13 AM »
I re-built my 550 in the basement,left the motor in the garage, after painting, cleaning and assembling,attached a narrower set of bars,got my son to help push and up the stairs no problem,we are both around 175 lbs
1978 cb 550k......stock,my first re-build


Loud pipes suck.......

If you buy something.........pay for it !
If you sell something .......ship it !
If you say you are going to do something......do it !
If you have a question about something......ask it !
When the seller answers ........let him know whether you still want it or not !
If you receive something .....let the seller know you got it !
If you get something and are happy/un happy with it .....let the giver/seller know !
If you have any kind of issue,shipping/receiving/quality/price/shipping charges etc !
Communicate

Offline ASCSurveyor

  • Knee-Blaster
  • Full Member
  • *
  • Posts: 84
  • Bikes: '05 SV645, '77 CB750K
Re: Indoor Storage/Rebuild
« Reply #15 on: February 02, 2009, 08:06:45 AM »
Sorry I haven't gotten back to this... Stupid SV is taking up all my time.   >:(

Anyway, If I get it down to the motor and frame, is it possible to have 2 people carry it up 15 steps?  It's a strait staircase w/ no turns.  Had someone on our SV site say the motor weighs 180lbs.  Frame probably weighs 100 or so, no?  I'm guessing here... I have no clue.
'77 750K Rebuild Blog
--------------------------
http://mikeshondacb.blogspot.com/

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Indoor Storage/Rebuild
« Reply #16 on: February 02, 2009, 10:17:34 AM »
Motor is close to that weight...

Frame probably weight 40-50lbs or so.... in the 70's weight wasn't an issue I guess.

I still vote for the friends pushing upstairs idea.
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline ASCSurveyor

  • Knee-Blaster
  • Full Member
  • *
  • Posts: 84
  • Bikes: '05 SV645, '77 CB750K
Re: Indoor Storage/Rebuild
« Reply #17 on: February 02, 2009, 12:00:22 PM »
My issue with pushing it up, is that I'm thinking our management wouldn't be too keen on me having a bike in my apartment, regardless of if it's a "running" bike or not.  I know that I could fight it through technicallities, but I'd rather not fight it period.

Normally, this wouldn't be an issue.  Neighbors ask me what I'm doing, I say "mind yer business, that's what", and all is well.  However, the lady that lives below me is an assistant manager at the complex.  So if I just bring it up in pieces, she might not notice (she's a little slow in the head, and probably wouldn't put all the pieces together).

Rolling the bike up the stairs would be quite the undertaking, regardless of how quick it would be done.  And with my luck the way it is lately, as soon as I moved the bike towards the stairs, she'd step out for a smoke.
'77 750K Rebuild Blog
--------------------------
http://mikeshondacb.blogspot.com/

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Indoor Storage/Rebuild
« Reply #18 on: February 02, 2009, 01:24:31 PM »
You could always claim it as art....

Or say you don't want it stolen??

I'd do it at 2am... less chance that way of her noticing.
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline papp101

  • Enthusiast
  • **
  • Posts: 174
Re: Indoor Storage/Rebuild
« Reply #19 on: March 01, 2009, 10:03:04 PM »
I took the engine out of my CB500 outside in about an hour. Easy as pie. Had a buddy help me get it out of the frame,then we rolled the frame down the steps - I almost could have done that myself.

I'd say take off the tank, seat and engine and roll the baby up.

Then set the engine on a 2x4 rug or STURDY blanket and lift it up with yourself and another. easy to carry like that in my experience.

Offline Hush

  • Finally they realise that I am an
  • Really Old Timer ...
  • *******
  • Posts: 6,761
  • "Lady, I've heard it all before"!
Re: Indoor Storage/Rebuild
« Reply #20 on: March 02, 2009, 10:55:40 AM »
Sounds like a plan, remove engine then just push it up the stairs, without the donk it won't be a problem about as much difficulty as a pushbike.
Get a mate to help with the motor, as papp101 said use an old tarp or rug (that way no one in the complex will know what you have in there).
I'd say getting the handlebars through the doors will be your biggest problem so be prepared to loosen or remove them (replace with short bit of old pipe or broom handle for steering).
Getting it down will be a piece of cake bro, take one ramp, place on balcony, start bike at end of hallway and apply full throttle............... ;D I've seen Evil Kanevil do it heaps of times. ;)
I think the thing I most like about motorcycling is the speed at which my brain must process information at to avoid the numb skulls who are eating pies, playing the ukulele, applying make-up etc in the comfort of their airconditioned armchairs as they make random attempts to kill me!!!!!!!

Offline bradweingartner

  • 74 CB 550 x2
  • Hot Shot
  • ***
  • Posts: 367
Re: Indoor Storage/Rebuild
« Reply #21 on: March 05, 2009, 09:20:33 AM »
IMO, removing the engine isn't worth the trouble. If she'd notice you pushing it up the steps with the motor, she'll notice it without!!

Depending on how wide your stairs are, four reasonably normal guys could nearly carry it up the stairs. Only real hassle is those damn bars are always just a touch wider than the door. I walk mine up 3 steps every year myself. I can lift the back of the motorcycle up myself and I'm a 150lbs pipsqeak.

I say just go for it. 3-4 friends and some liquid strength and that #$%* is done in 5 min.

Offline Sporkfly

  • The frosty rider
  • Hot Shot
  • ***
  • Posts: 727
  • Mmm, Guinness
Re: Indoor Storage/Rebuild
« Reply #22 on: March 05, 2009, 09:53:35 AM »
Just be really careful if you bring it down the stairs in one piece. I decided I'd bring mine down into the basement in one piece. Didn't really think anything of the fact that neither brake worked and the door at the bottom of the stairs was closed. It took me about 1 second to reconsider those facts as the bike and I sped down the stairs and it pinned me against the door about 2 inches away from my manhood.

I straight up got lucky whilst being stupid. Be safe.
1977 CB550K
1979 GL1000 - Current project, winter '09-'10
1979 CX500
1976 Suzuki GT500 Titan

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,347
Re: Indoor Storage/Rebuild
« Reply #23 on: March 05, 2009, 08:02:12 PM »
Quote
I took mine apart piece by piece and took it into the basement.  I'll reassemble outside int he spring

+1   stripped it to the frame outside and carried it downstairs, my brother in-law helped get the engine/frame assembly down later on.