« previous next »
Pages: [1]   Go Down

Author Topic: 750F brake lever return spring???  (Read 834 times)

0 Members and 1 Guest are viewing this topic.

Offline turkey4me

  • Enthusiast
  • **
  • Posts: 237
  • The closer you are the less you can see!
750F brake lever return spring???
« on: March 14, 2009, 10:35:58 AM »
Searched the forums but no luck with the 76 750F brake lever return spring.

I know one end of spring hooks over back side of brake pedal shaft. 

Where does the other end attach to create tension on spring???

Help please...
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,938
  • Bought her new 4/75
Re: 750F brake lever return spring???
« Reply #1 on: March 14, 2009, 10:53:52 AM »
Looking at the rear master you will see the triangle formed by the frame in which the rear master is located. The spring wraps around the frame, from the rear to the front, at the leading/front angle of the triangle. Hope you can get a visual of this.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Steve F

  • I have "some-timer's disease" because I'm an
  • Old Timer
  • ******
  • Posts: 2,928
  • "To Ride Is The Reason, The Destination The Excuse
Re: 750F brake lever return spring???
« Reply #2 on: March 14, 2009, 11:45:57 AM »
Don't know if you can see in the pic, but it supports itself on the brake shaft, one end hangs over the brake arm, and the radius end fits against the frame tube (mine has a piece of yellow tubing covering this part).
Logged

Offline turkey4me

  • Enthusiast
  • **
  • Posts: 237
  • The closer you are the less you can see!
Re: 750F brake lever return spring???
« Reply #3 on: March 14, 2009, 11:49:27 AM »
Thanks!  Not sure I have the right spring but with a torch and some bending was able to get some tension on it.
Logged

Offline moham

  • .fnord.
  • Expert
  • ****
  • Posts: 1,108
Re: 750F brake lever return spring???
« Reply #4 on: March 14, 2009, 01:19:27 PM »
Quote from: Steve F on March 14, 2009, 11:45:57 AM
Don't know if you can see in the pic, but it supports itself on the brake shaft, one end hangs over the brake arm, and the radius end fits against the frame tube (mine has a piece of yellow tubing covering this part).

Nice looking set of controls there...
Logged
78 750K-The Ocho
74 550-The Cherry Picker
70 750K0 motor-Dick in a Box

Offline Steve F

  • I have "some-timer's disease" because I'm an
  • Old Timer
  • ******
  • Posts: 2,928
  • "To Ride Is The Reason, The Destination The Excuse
Re: 750F brake lever return spring???
« Reply #5 on: March 14, 2009, 05:01:50 PM »
Quote from: moham on March 14, 2009, 01:19:27 PM
Quote from: Steve F on March 14, 2009, 11:45:57 AM
Don't know if you can see in the pic, but it supports itself on the brake shaft, one end hangs over the brake arm, and the radius end fits against the frame tube (mine has a piece of yellow tubing covering this part).

Nice looking set of controls there...
;D Thanks
Logged
Pages: [1]   Go Up
« previous next »