Author Topic: 1978 CB750K choke shaft assembly between two middle carbs (Read 1544 times)

flyingredhorse · « **on:** March 21, 2009, 09:47:39 PM »

I am having trouble placing the forked end of the choke shaft. The shop manual is vague and I somehow got digital pics of the disassembly from every angle but the one I need.

and

GammaFlat · « **Reply #1 on:** March 21, 2009, 09:59:44 PM »

I have a set of 77/78 carbs off a bike - let me know what pic you need.

flyingredhorse · « **Reply #2 on:** March 21, 2009, 10:18:03 PM »

GammaFlat - here is the drawing and a pic at the angle I need to see. . . thanks man. Its the view between the two carbs of the forked end of the choke shaft . . .

flyingredhorse · « **Reply #3 on:** March 21, 2009, 10:19:12 PM »

here is the drawing from the shop manual.

GammaFlat · « **Reply #4 on:** March 22, 2009, 07:25:16 AM »

Let me know if I "missed the mark".

flyingredhorse · « **Reply #5 on:** March 22, 2009, 09:19:19 AM »

Spot on pics! Thanks so much. That did the trick. I learned that when I sprung it when I disassembled it the spring must have unwound at least one extra wrap and without that tension the choke wouldn't snap back to open.

Now I need to replace one little rubber tube and I can put the carbs back on the bike. Ride safe.

SOHC/4 Owners Club Forums

News:

Author Topic: 1978 CB750K choke shaft assembly between two middle carbs (Read 1544 times)

flyingredhorse

1978 CB750K choke shaft assembly between two middle carbs

GammaFlat

Re: 1978 CB750K choke shaft assembly between two middle carbs

flyingredhorse

Re: 1978 CB750K choke shaft assembly between two middle carbs

flyingredhorse

Re: 1978 CB750K choke shaft assembly between two middle carbs

GammaFlat

Re: 1978 CB750K choke shaft assembly between two middle carbs

flyingredhorse

Re: 1978 CB750K choke shaft assembly between two middle carbs