« previous next »
Pages: [1]   Go Down

Author Topic: New to forum and SOHC plans  (Read 2065 times)

0 Members and 1 Guest are viewing this topic.

Nolan Woodbury

  • Guest
New to forum and SOHC plans
« on: March 29, 2009, 03:55:15 PM »
Hi everyone,

As stated, I'm new here but not to bikes; over 30 years in riding. Mostly Euro stuff for the last 25.

On a fluke, I recently 'acquired' this 1975 CB750K (the PO owed me for storage) but welcomed it in, as I've always faniced a 8v cafe ride or maybe even a Rickman CR. The bike has about 50K, a 16" rear wheel (I have the original) and a rattle can paint job. Since this photo, I have tossed the fairing in the skip and cleaned it up some. It actually runs pretty good, although I have not spent any time tuning or fussing. Just some new plugs, and lube/adjust the chain.







I realize there is a lot of ways to go, but this particular example caught my eye while I was searching for something else. I think the owner posts here...I found these pictures on a road racing car site. Maybe he'll get in touch?





Well, that's it except to ask if there is any really good, preferred sources for aftermarket goodies? My initial plan besides bars, header and some trimming is to keep the bike basically stock. That is, if the engine proves to be solid. If it isn't, who knows? I'd rather not spend a ton of money on it right now. I always say that, but have several other bikes and a R75/5 on the lift that isn't finished...

Please post ideas or photos! You can also send to my email: nolan.woodbury@vintagemotorcyclesonline.com

Thanks for the ear! Looking forward to your feedback-       
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: New to forum and SOHC plans
« Reply #1 on: March 29, 2009, 04:18:11 PM »
Great first post! :)  Pictures and everything!

If you're in need of parts, look in the FAQ under "where can I buy parts for my sohc4?".  It's a very comprehensive and regularly updated list of suppliers. 
Logged

Offline VonYinzer

  • Enthusiast
  • **
  • Posts: 180
Re: New to forum and SOHC plans
« Reply #2 on: March 29, 2009, 04:43:33 PM »
Welcome to the forum. Im a newer member myself, but hopefully can be of some help!
Logged
THIS BIKE KILLS FASCISTS!!!!

Offline themotoworks

  • addict
  • Enthusiast
  • **
  • Posts: 109
    • roc city cafe racers
Re: New to forum and SOHC plans
« Reply #3 on: March 29, 2009, 04:52:20 PM »
if you ever ditch that 16" rim, I'd be interested in it... is it aluminum?
Logged
www.roccitycafe.com <- my sideline turned living

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: New to forum and SOHC plans
« Reply #4 on: March 29, 2009, 05:20:51 PM »
That front tire sidewall looks pretty tired. 

Sounds like you got a decent runner to turn into a cafe.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Nolan Woodbury

  • Guest
Re: New to forum and SOHC plans
« Reply #5 on: March 29, 2009, 05:21:18 PM »
Quote from: roccitycafe on March 29, 2009, 04:52:20 PM
if you ever ditch that 16" rim, I'd be interested in it... is it aluminum?

No, it's plated steel.

I'm not sure if I'll keep it or not. I am not sure what kind of ground clearance I'll have with the 4-onto-1 and that, far as I can tell is the only real issue...besides tire availability. The lower seat height is a plus. I'm also not sure just how good it'll handle (with decent tires) and just how hard I'll try to ride it. I'm used to stuff like this;



A really good handling bike, the Lemon.

Another option is the Rickman kit, which -admittedly- makes the whole project a huge undertaking. i am sort of torn between the English Endurance or classic Ace Cafe' naked.



I know which would be cheaper tho- ;D    
Logged

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: New to forum and SOHC plans
« Reply #6 on: March 29, 2009, 11:48:20 PM »
I've not seen that Rickman before - got a source?

Weird the way that the front brake caliper hangs out over the disk - also not seen one with non-horizontal decals!
Logged
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Nolan Woodbury

  • Guest
Re: New to forum and SOHC plans
« Reply #7 on: March 30, 2009, 05:56:04 AM »
The brothers, Don and Derek (I've met Derek) stopped making the kits in the mid-80 and licensed production to a new company. Thet started by making dirt frames then ventured into street and road racing production. They were known best for their "Metisse" (French for 'mongrel') nickle plated frame and body kits. For a time in the mid-1970s, Rickman WAS the English motorcycle industry! Here's something I wrote for my site:

http://www.vintagemotorcyclesonline.com/index.php?option=com_content&view=article&id=78:rickman-cr&catid=52:stories&Itemid=77

There's a Wiki page on Rickman too: http://en.wikipedia.org/wiki/Rickman_Motorcycles.

I have not talked to anyone who has used the new company for parts. The old stuff shows up on eBay from time to time.

 
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: New to forum and SOHC plans
« Reply #8 on: March 30, 2009, 06:46:02 AM »
Looks like it has the Rickman forks on that one.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,808
Re: New to forum and SOHC plans
« Reply #9 on: March 30, 2009, 09:42:22 AM »
Welcome to the group!  Just a suggestion...........if your inclined to go for the Rickman.......you could get a good start by following the wheels and controls theme.  Then if you get the Rickman body work and/or the frame, your ready to go.  Hint.......look for info on modern fuels versus fiberglass tanks!
Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: New to forum and SOHC plans
« Reply #10 on: March 30, 2009, 10:03:10 AM »
Welcome. Saw this yesterday on the MI C.L. you might be interested in.

http://detroit.craigslist.org/mcy/1098118855.html
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: New to forum and SOHC plans
« Reply #11 on: March 30, 2009, 10:06:51 AM »
$250 is way too much for that.

It would sell for about £40-£50 in UK.
Logged
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: New to forum and SOHC plans
« Reply #12 on: March 30, 2009, 10:09:55 AM »
I have no idea, just saw it & put out there. Things keep going the way they are & that might be the exchange rate before long!
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Nolan Woodbury

  • Guest
Re: New to forum and SOHC plans
« Reply #13 on: March 30, 2009, 10:29:14 AM »
Quote from: SteveD CB500F on March 30, 2009, 10:06:51 AM
$250 is way too much for that.

It would sell for about £40-£50 in UK.

I'm not so sure about that...it is genuine and frankly, pretty hard to find. I'm tempted!!

Another option is AirTech fiberglass; they have a HUGE catalog;

http://www.airtech-streamlining.com/index.html

Know what guys? That's why I wanted a SOHC Honda cafe'...so many possibilities...and they're all good! Real room for freedom of expression. 


 
Logged

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: New to forum and SOHC plans
« Reply #14 on: March 30, 2009, 10:34:25 AM »
That's the spirit man! Good luck on the hunting and build.

Welcome.
Logged
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline UnCrash

  • Pass
  • Master
  • *****
  • Posts: 1,705
    • My Blog
Re: New to forum and SOHC plans
« Reply #15 on: March 30, 2009, 12:55:54 PM »
Welcome to the forum!

$250 isn't outlandish for that fairing in the US.  You'll spend more with Airtech, then at  Gustafson getting a windscreen, and then at painting then if you buy it.

Send some of those UK fairings this way then!
Logged
You can't make too much popcorn, but you can definately eat too much popcorn.

Offline SteveD CB500F

  • Global Moderator
  • Old Timer
  • *****
  • Posts: 4,553
  • Ride on the Steel Breeze...
    • TVAM
Re: New to forum and SOHC plans
« Reply #16 on: March 30, 2009, 01:40:15 PM »
The freight would kill the deal!
Logged
SOHC4 Member #2393
2015 Tiger 800 XRT
1971 CB500K0 (US Model)

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: New to forum and SOHC plans
« Reply #17 on: March 30, 2009, 01:47:01 PM »
I just got a CR750 tail from AIRTECH! Very nice, diggin it.Took about 3 or 4 weeks, but worth it.
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?
Pages: [1]   Go Up
« previous next »