Author Topic: Locktite on all the bolts?  (Read 948 times)

0 Members and 1 Guest are viewing this topic.

Offline Turbogrimace

  • Hot Shot
  • ***
  • Posts: 387
    • Draft Cycle Works
Locktite on all the bolts?
« on: March 30, 2009, 03:31:23 PM »
Im closing up the bottom end of my CB750 F.  Should I locktite everything or can I just locktite the main crank bolts?  Whats the best bet?  If I have to take the cases apart again (for machine work) I dont want to shear off all of the smaller bolts.

Offline Pwfyrcat1

  • Enthusiast
  • **
  • Posts: 173
  • What I'm doing when it's warm
Re: Locktite on all the bolts?
« Reply #1 on: March 30, 2009, 03:49:46 PM »
blue not red.  that red is almost a permanent lockdown
Just because you can, doesn't mean you should;)

2002 Yamaha Warrior, solo/souped/slammed/fast
2004 Yamaha V Star Silverado, 'The Sedan'
1992 Yamaha TDM 850
1975 Honda CB400F basket case that wants to be something

Offline Turbogrimace

  • Hot Shot
  • ***
  • Posts: 387
    • Draft Cycle Works
Re: Locktite on all the bolts?
« Reply #2 on: March 30, 2009, 03:56:07 PM »
So is that a yes?

Offline ttr400

  • Hot Shot
  • ***
  • Posts: 566
    • ttr400 Projects and Billet parts.
Re: Locktite on all the bolts?
« Reply #3 on: March 30, 2009, 10:32:28 PM »
Don't use any locktite on the case covers or crankcase screws/bolts.

Kevin
CB400F- 492 Yoshi Racer.
Cb400F- 466 Yoshi Cafe.
CR750 D Mann Replica.
VFR750R- RC30 - 1988.
www.ttr400.com

Offline Lars

  • Hot Shot
  • ***
  • Posts: 449
Re: Locktite on all the bolts?
« Reply #4 on: March 31, 2009, 04:01:22 AM »
I never use any Locktite. Clean surfaces, new gasket and tightend the screws well.
Lars
...if you got the ability to act...

WHALEMAN

  • Guest
Re: Locktite on all the bolts?
« Reply #5 on: March 31, 2009, 04:56:00 AM »
I am curious what Mrieck does but I clean the threads with a wire brush and use a very small amount of of antisieze. Dan