Author Topic: HP increase on cb650  (Read 3502 times)

0 Members and 1 Guest are viewing this topic.

ThomasJ

  • Guest
HP increase on cb650
« on: April 17, 2005, 07:33:26 AM »
I am in the middle of a re ring job on my 81 CB850. I am also installing a MAC 4 into 1 system and K&N pod filters and a dynojet jet kit.(stage three)  What kind of horsepower increase can I expect from the exhaust, jets, and filters. Anybody know where I can get a better camshaft? Anybody who can share any experiance with these parts would be great.   

Thanks ;D

Offline SCJIM

  • Enthusiast
  • **
  • Posts: 169
Re: HP increase on cb650
« Reply #1 on: April 17, 2005, 08:25:20 AM »
i dunno about the parts Thomas but

you gotta take some pics and post em

i just gotta see


Jim
Jim in SC
1981 CB 650 Custom

Ibsen

  • Guest
Re: HP increase on cb650
« Reply #2 on: April 17, 2005, 03:30:38 PM »
I don't know that much about it, but Web Cam makes performance camshafts for the 500/550/750. I couldn't find the 650 on the list, but if you contact them they might be able to help you. But to get a full effect of a hotter camshaft, you should also prepaire the cylinder head. New valve springs, check the valve guides, valve seats and valves, and porting the cylinder head.

http://www.webcamshafts.com/

tomasz

  • Guest
Re: HP increase on cb650
« Reply #3 on: April 17, 2005, 06:42:04 PM »
Ibsen try:
www.megacyclecams.com
415 472-3195, FAX 415 472-1497

Ibsen

  • Guest
Re: HP increase on cb650
« Reply #4 on: April 18, 2005, 11:20:39 AM »
Ibsen try:
www.megacyclecams.com
415 472-3195, FAX 415 472-1497


Thanks!
But they didn't have the 650 camshaft listed either.

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: HP increase on cb650
« Reply #5 on: April 18, 2005, 02:54:01 PM »
Someone did have a email long time ago with a co that did have a 650 cam. Maybe in the archives.



                    Terry
18 grand and 18 miles dont make you a biker

ThomasJ

  • Guest
Re: HP increase on cb650
« Reply #6 on: April 20, 2005, 03:19:49 PM »
For anybody interested in a camshaft for your CB650. I just got off the phone with web cam and they can do a performance regrind on your stock cam. If you want to get really wild they can hard weld your stock cam (add more material to it) and go even further.

The regrind is $140 and the hard weld was like $350. Due to the summer coming up the wait right now for a regrind is about five weeks. Im going to send them a old 650 cam I have so they can do it and just run my stock cam for untill I get it back.

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: HP increase on cb650
« Reply #7 on: April 20, 2005, 03:26:47 PM »
Sounds like a lot for maybe at the very most 10 hp.  Would have to do the head also to maximize it.



                    Terry
18 grand and 18 miles dont make you a biker