« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: What parts, if any, are exactly the same across all models?  (Read 7886 times)

0 Members and 1 Guest are viewing this topic.

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
What parts, if any, are exactly the same across all models?
« on: April 08, 2009, 12:17:00 PM »
aside from the name.   8)
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: What parts, if any, are exactly the same across all models?
« Reply #1 on: April 08, 2009, 12:35:47 PM »
Bolts, screws and various hardware  ;)
Logged
Stranger in a strange land

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #2 on: April 08, 2009, 12:36:50 PM »
oh come on!  you're not gettin' off that easy!   :P
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #3 on: April 08, 2009, 12:37:15 PM »
i was thinking wires.   ;D
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: What parts, if any, are exactly the same across all models?
« Reply #4 on: April 08, 2009, 12:42:37 PM »
Across all Models (the hondamatic and 77-78F's included?)

screws, nuts, bolts
crank and cam bearings.
valve cover, dyno cover, points cover.

Maybe the rods?

I was going to say cylinder blocks but then I remembered that in 1969-1970 there were different variations of casting, and in 1973 they chain valley and oiling passages were revised.

I was going to say carb rubbers but nope 77-78 are different from 69-76

I was going to say front hub, but the comstars on the 77-78 are not spokes.

I was going to say engine cases but the 77-78s are different and the hondamatic is a beast on its own.

I think this would work better if you asked about a part and we told you where it fit and didn't fit.
Logged
Maintenance Matters Most

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #5 on: April 08, 2009, 12:44:19 PM »
ok... uh... get your mind out of the 750 gutter!

ALL MODELS OF SOHC4
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: What parts, if any, are exactly the same across all models?
« Reply #6 on: April 08, 2009, 12:50:56 PM »
Quote from: heffay on April 08, 2009, 12:44:19 PM
ok... uh... get your mind out of the 750 gutter!

ALL MODELS OF SOHC4

The left handlebar switch. wait, is that the one with the headlight turn off/on switch or is it the right? Whichever handlebar switch DOESN'T have the headlight on/off switch - yeah that is the one.

yup that is about it.

wadda mean.....there are other bikes besides a 750? You mean I have to recognize the 350f as a motorcycle and not a really expensive money pit of a moped? fore shame.

oh and I think the headlight is the same for all of them also. Not the bucket or the ring, the actual thing you plug in to make light.

I know there is no such thing as a stupid question, but.......









.....you are siging your self up for a lot of stupid answers just by the nature of the question.
« Last Edit: April 08, 2009, 12:54:50 PM by Geeto67 »
Logged
Maintenance Matters Most

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #7 on: April 08, 2009, 01:08:52 PM »
stupid answers are fine.

just admit you couldn't figure out that the post was in the SOHC4 forum and was to include SOHC4s.

if i was worried about stupid answers i wouldn't post to internet forums.   ;)
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #8 on: April 08, 2009, 01:12:40 PM »
by the way... it still seems obvious to me and you just seem like an ass.  i'm not sure what is sooooo difficult or in-valid about the question. 

perhaps i'm misreading your post...
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What parts, if any, are exactly the same across all models?
« Reply #9 on: April 08, 2009, 01:14:03 PM »
Do believe the coils are the same across the board.... not sure if that's true for the 650's, but I reckon it probably is.
Brake lever was same, too, far as I could tell. Not much else, though.
Logged
No.

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #10 on: April 08, 2009, 01:15:28 PM »
now see... perfectly non stupid answer
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What parts, if any, are exactly the same across all models?
« Reply #11 on: April 08, 2009, 01:18:13 PM »
Oops, I meant CLUTCH lever, not brake lever.

There were some differences in the master cylinders between the various models, so I assume there were also differences in brake lever.
Like I said, I meant clutch, not brake.
Logged
No.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,920
  • Bought her new 4/75
Re: What parts, if any, are exactly the same across all models?
« Reply #12 on: April 08, 2009, 01:21:52 PM »
mirrors? steering stem nut and washer? gas?
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What parts, if any, are exactly the same across all models?
« Reply #13 on: April 08, 2009, 01:23:44 PM »
Quote from: Jerry Griffin aka Rxman on April 08, 2009, 01:21:52 PM
mirrors?
Nope
Quote
steering stem nut and washer?
I dunno
Quote
gas?
lawl
Logged
No.

Offline cafe750

  • Hot Shot
  • ***
  • Posts: 583
  • If you can't fix it with a hammer, it's electrical
Re: What parts, if any, are exactly the same across all models?
« Reply #14 on: April 08, 2009, 01:24:05 PM »
Um, taillight and instrument cluster bulbs....the air in the tires is interchangeable as well, as well as the schraeder valves in the valve stems.

I think they all run a 530 chain as well... :)
Logged
"It's an old motorcycle, the wind is supposed to blow your head around, it's supposed to leak oil, the brakes should suck, and every now and then, it should scare you so bad you piss your pants."



Roy, Washington

Offline cafe750

  • Hot Shot
  • ***
  • Posts: 583
  • If you can't fix it with a hammer, it's electrical
Re: What parts, if any, are exactly the same across all models?
« Reply #15 on: April 08, 2009, 01:24:37 PM »
Take the chain thing back....there's 630's in there too...
Logged
"It's an old motorcycle, the wind is supposed to blow your head around, it's supposed to leak oil, the brakes should suck, and every now and then, it should scare you so bad you piss your pants."



Roy, Washington

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What parts, if any, are exactly the same across all models?
« Reply #16 on: April 08, 2009, 01:27:19 PM »
Quote from: cafe750 on April 08, 2009, 01:24:05 PM
Um, taillight and instrument cluster bulbs....
Not across all years.
Quote
the air in the tires is interchangeable as well, as well as the schraeder valves in the valve stems.

I think they all run a 530 chain as well... :)

But the chains are different lengths, so no....
Logged
No.

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #17 on: April 08, 2009, 01:33:19 PM »
Quote from: Swoop on April 08, 2009, 01:30:05 PM
Okay....I'll go out on a limb and say valve stem cores?  ;D
Quote from: cafe750 on April 08, 2009, 01:24:05 PM
Um, taillight and instrument cluster bulbs....the air in the tires is interchangeable as well, as well as the schraeder valves in the valve stems.

I think they all run a 530 chain as well... :)
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: What parts, if any, are exactly the same across all models?
« Reply #18 on: April 08, 2009, 01:37:27 PM »
Quote from: heffay on April 08, 2009, 01:08:52 PM

if i was worried about stupid answers i wouldn't post to internet forums.   ;)

Touche`

stupid answers are fine.

Quote from: heffay on April 08, 2009, 01:08:52 PM
just admit you couldn't figure out that the post was in the SOHC4 forum and was to include SOHC4s.

How about I admit that I don't really care about SOHC4 models I don't own and leave it at that? Sound like an ass? you bet, but I betcha you laughed at least a little, a chuckle maybe?

Edit - I was being too serious.... :P
« Last Edit: April 08, 2009, 01:51:58 PM by Geeto67 »
Logged
Maintenance Matters Most

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #19 on: April 08, 2009, 01:44:48 PM »
i was messin' w/ you geeto... that's why i'm on in a hurry to catch you and reply.   ;)  BS, yes.
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: What parts, if any, are exactly the same across all models?
« Reply #20 on: April 08, 2009, 01:52:40 PM »
Quote from: heffay on April 08, 2009, 01:44:48 PM
i was messin' w/ you geeto... that's why i'm on in a hurry to catch you and reply.   ;)  BS, yes.

gotcha...

Logged
Maintenance Matters Most

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: What parts, if any, are exactly the same across all models?
« Reply #21 on: April 08, 2009, 02:30:40 PM »
Oil Filters!!!!!!!
Logged

Offline jaknight

  • Hot Shot
  • ***
  • Posts: 637
  • ....Round Town Ride......
Re: What parts, if any, are exactly the same across all models?
« Reply #22 on: April 08, 2009, 04:38:37 PM »
Sorry Geeto, ;) ;)

The left handlebar switches are different........ that one doesn't count.

The automatic coffee brewer attachment under the rear tail lamp stayed the same........ I sent mine out to have it chromed....... you ever get yours chromed? 8) 8)

~ ~ ~ jaknight ~ ~ ~
Logged
"THE PEN IS MIGHTIER THAN THE SWORD........
..........EXCEPT IN A SWORD FIGHT"
___________________________________________
"There is nothing new under the sun.........But there are many old things we do not know"
BIBLE ---> Basic Instructions Before Leaving Earth

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: What parts, if any, are exactly the same across all models?
« Reply #23 on: April 08, 2009, 04:44:09 PM »
Problem with the handlebar switch being the same theory....wires are all longer on the 400F

Plus it has the flash to pass/horn.

Some variation amongst the different countries on the 750.

Headlights are smaller on the 350/400 so no dice there.

But the oild filters are all the same.

On the bikes I have the Regulators are all the same 72-75....
Logged
Stranger in a strange land

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,920
  • Bought her new 4/75
Re: What parts, if any, are exactly the same across all models?
« Reply #24 on: April 08, 2009, 05:39:23 PM »
Jeez guys, I can't believe everyone missed this - the friggen muffler bearings

« Last Edit: April 09, 2009, 10:03:12 PM by Jerry Griffin aka Rxman »
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)
Pages: [1] 2 3 ... 5   Go Up
« previous next »