Author Topic: Billet blocks....who will pay...pics added 9/7/09...10/24....2/10 (Read 193862 times)

BLUE71TURBO · « **Reply #275 on:** November 28, 2009, 11:42:51 AM »

Hey Mike, Have you got pictures of the finished cylinder ? Also how many do you have left ?

Sam Green Racing · « **Reply #276 on:** November 28, 2009, 12:18:44 PM »

I got to meet the guy who is doing them last night, he was putting the finishing touches to one of the blocks, looked awesome.
I got a few pics of the machine in action but through the doors being sprayed with coolant, I'm not sure how good they will come out.
Also I'm still waiting on a USB lead that Mike ordered on line to transfer the pics from my phone to the computer.
I'll PM you when they are up Jon, cos we know you'll forget

Sam.

Bill/BentON Racing · « **Reply #277 on:** November 28, 2009, 01:00:53 PM »

Sam,did you tell him to make one hole a little smaller for CB750A? Good way to advertise!!

,Bill Ha Ha it's true!

Sam Green Racing · « **Reply #278 on:** November 28, 2009, 01:25:44 PM »

That would be a good idea Billy but my pocket won't stretch that far and I think they allready have great big holes.

Sam.

BLUE71TURBO · « **Reply #279 on:** November 28, 2009, 07:56:33 PM »

Quote from: SamCB750A on November 28, 2009, 12:18:44 PM

I got to meet the guy who is doing them last night, he was putting the finishing touches to one of the blocks, looked awesome.
I got a few pics of the machine in action but through the doors being sprayed with coolant, I'm not sure how good they will come out.
Also I'm still waiting on a USB lead that Mike ordered on line to transfer the pics from my phone to the computer.
I'll PM you when they are up Jon, cos we know you'll forget

Sam.

Cool Sam. I'm really interested to see the final ......head, no..... pistons, no......carbs, no.....what were we talking about ?

Sam Green Racing · « **Reply #280 on:** November 28, 2009, 08:02:36 PM »

Great big jugs

BLUE71TURBO · « **Reply #281 on:** November 28, 2009, 08:17:46 PM »

Like these ?

Jerry Rxman Griffin aka MuthaF'er · « **Reply #282 on:** November 29, 2009, 09:54:19 AM »

Any guesses to the size of those overbore jugs?

754 · « **Reply #283 on:** November 29, 2009, 01:02:05 PM »

Appears to be stock bores.

not sleeved or oversized..

.. maybe tweaked a few time....

Retro Rocket · « **Reply #284 on:** November 29, 2009, 01:39:46 PM »

That looks like the new 1000cc silicon alloy big bore kit......

Mick

MRieck · « **Reply #285 on:** November 29, 2009, 06:10:06 PM »

Quote from: retro rocket on November 29, 2009, 01:39:46 PM

That looks like the new 1000cc silicon alloy big bore kit......

Mick

I disagree. Definitely stock IMO, from the factory there Mick.

Frank appears to know his materials.

Retro Rocket · « **Reply #286 on:** November 29, 2009, 06:13:01 PM »

Well Mike, if thats stock from the factory then my wife must be a 125......

Mick

Jerry Rxman Griffin aka MuthaF'er · « **Reply #287 on:** November 29, 2009, 06:39:20 PM »

Kinda reminds me of a VTX1800 jugs. Nothing like a good V-Twin. American made perhaps?

Sam Green Racing · « **Reply #288 on:** November 29, 2009, 07:27:49 PM »

You're all a load of pervs, I'm completely disgusted with you all.......

any more pics Jon ?

Sam.

BLUE71TURBO · « **Reply #289 on:** November 29, 2009, 11:49:03 PM »

Here ya go Sam..........

My favorite redhead girl........ LAURA PREPON from that 70's show.

Go easy now, this area is about billet jugs not soft,warm sweet JUGS !!

23tbucket · « **Reply #290 on:** December 02, 2009, 08:20:38 PM »

MRieck: I glanced at this post earlier this summer, and I thought yeh right..mill complete heads...dream on.....but you pulled it off! I am utterly impressed. Most folks with crazy ideas like this are all talk, but here you are 8 months later and your dream is almost a reality. Just unreal...kudos to you man. Thanks for the excellant posting and pictures.
Going through hours of posts on this site......beats the "Discovery" channel.

Sam Green Racing · « **Reply #291 on:** December 03, 2009, 04:33:40 AM »

Welcome to the forum 23, anything is possible if you know what you are doing and are prepaired to put your money where your mouth is.

Sam.

BLUE71TURBO · « **Reply #292 on:** December 04, 2009, 03:59:20 PM »

PICTURES ? I want pictures !! Please.....perty please !!

MRieck · « **Reply #293 on:** December 19, 2009, 03:17:35 PM »

The blocks should be done in about 10 days. I apologize for the hold up but the reasons are legitimate (F1 work, tool drive motor quitting etc). If it helps they are absolutely bad ass my SOHC brothers.
Mike

azuredesign · « **Reply #294 on:** December 19, 2009, 07:11:16 PM »

Quote from: MRieck on December 19, 2009, 03:17:35 PM

If it helps they are absolutely bad ass my SOHC brothers.
Mike

Just like their creator!

MRieck · « **Reply #295 on:** January 02, 2010, 03:05:14 PM »

The first block (mine) is finished in regard to machining. My other friend is finishing the block.ie deburring, fin edge polishing etc.

Bill/BentON Racing · « **Reply #296 on:** January 02, 2010, 04:11:37 PM »

CONGRATULATIONS!!!!!!!!!!!!!!!!!!!!!,Way to go,you the Man!,Enjoy the feeling you deserve it.Job well done!!

:)Bill

MRieck · « **Reply #297 on:** January 03, 2010, 06:07:06 PM »

All the machining is done on the blocks. Finish work should be done by the end of the week.

BobbyR · « **Reply #298 on:** January 03, 2010, 06:40:20 PM »

Now you will have a 2 Million Dollar CB

754 · « **Reply #299 on:** January 03, 2010, 11:48:51 PM »

Cool, must feel good !

Cant wait to see a finished pic..

News:

Author Topic: Billet blocks....who will pay...pics added 9/7/09...10/24....2/10 (Read 193862 times)