Topic: Billet blocks....who will pay...pics added 9/7/09...10/24....2/10

[RAZZ]

What size are the Oil fittings and tube?


Sent from my iPhone using Tapatalk

[PeWe]

Are those pipes loud? Or they have something that dampen? They look like straight megaphones.. 

If you are looking for an exhaust system that is as quiet as a Gold Wing then these pipes are not for you. They are a bit loud, but not as loud as the Carpy 4 into 1 that I had preciously installed. There is a baffle in each pipe, which are available separately as spare parts from Webike Japan, Part No. MRS-H75-M02.

Eric

Good with baffles possible to tune the sound.
My Hindle 4-2-1 has a dark tone and possible to ride with less sound. It has a wide hole all the way,. Endpipe is perforated inside with thick layer of wool in its sides.

 Another thing when twisting the throttle!

[H2Eric]

What size are the Oil fittings and tube?


Sent from my iPhone using Tapatalk

Fittings and oil lines are Goodridge 200 Series -8JIC

[RAZZ]

Ok thnx so more or less 16 mm?


Sent from my iPhone using Tapatalk

[Tintop]

Ok thnx so more or less 16 mm?
Sent from my iPhone using Tapatalk

-8JIC would make the hose size is Dash 8, which makes it 1/2", or 12.5mm ID.

[andy750]

Thanks Eric!

[mark ward]

Are those pipes loud? Or they have something that dampen? They look like straight megaphones.. 

If you are looking for an exhaust system that is as quiet as a Gold Wing then these pipes are not for you. They are a bit loud, but not as loud as the Carpy 4 into 1 that I had preciously installed. There is a baffle in each pipe, which are available separately as spare parts from Webike Japan, Part No. MRS-H75-M02.

Eric

Good with baffles possible to tune the sound.
My Hindle 4-2-1 has a dark tone and possible to ride with less sound. It has a wide hole all the way,. Endpipe is perforated inside with thick layer of wool in its sides.

 Another thing when twisting the throttle!

[Don R]

 Are there any left in the wild or have they all been built?

[CBJoe]

Are there any left in the wild or have they all been built?

Mines not built yet Don....hopefully will have done by spring.

[Don R]

 Awesome, I'll be watching for updates.

[Alan F.]

Is it time for another batch?

[Don R]

 Yes but, no.

[Alan F.]

Gone the way of the weldless frame kit have they?

[Don R]

Gone the way of the weldless frame kit have they?

Nothing that drastic, I'd guess it's more of a return on investment thing. I should have stepped up when I had the opportunity.

[Alan F.]

Perhaps if enough were to prepay at the latest projected cost it could happen?
I'm optimistic.

[newday777]

Mike
I still want one, maybe 2,(for my 76 and my 75) after seeing yours at Riceorama.......even more so now reading through this 30 pages the past 2 days.......
I need to get together with you to talk about my motor build this winter on my 76.

[MRieck]

Well....maybe if there is enough interest. I can talk to my machinist and see if he is interested.

[newday777]

Well....maybe if there is enough interest. I can talk to my machinist and see if he is interested.

Do you know if Fang sold his he had advertised a couple years ago? I sent him a pm but haven't heard back yet.

[Don R]

 I saw one pass through the for sale page a while back, I don't remember who's it was.

[newday777]

This is what I saw this morning

[corky]

I would put down a deposit for a billet block.  :-)

[kmb69]

I saw one pass through the for sale page a while back, I don't remember who's it was.

May have been the one I bought from a guy out of Canada.

I have 3 of them and could probably be convinced to let 1 go if I can recover what I paid for it.

[newday777]

I saw one pass through the for sale page a while back, I don't remember who's it was.

May have been the one I bought from a guy out of Canada.

I have 3 of them and could probably be convinced to let 1 go if I can recover what I paid for it.

PM sent

[Tracksnblades1]

Well....maybe if there is enough interest. I can talk to my machinist and see if he is interested.

Do you know if Fang sold his he had advertised a couple years ago? I sent him a pm but haven't heard back yet.

I know the Guy that bought the Billet Block And the Rieck  Stage 4 head..😜
Rods, RS34s , crank, and other parts were scooped up pretty fast…
Wishing kmb69 would let one of those billet cranks go…😍


Or run another with a 70mm stroke…🥰

[kmb69]

Getting messages about details.

Complete Mike Rieck Billet Block Kit still in the JMR PROFESSIONAL PACKAGING.
Cylinder is bored, honed, Nikasealed, and O-ringed.
JE Pisons 71.25mm, rings, pins, and NOS knock pin set.
Includes Cometic Copper head gasket, and Cometic base gasket.
Ready to assemble.
$3K USD, includes insured shipping in the lower 48.