Author Topic: Billet blocks....who will pay...pics added 9/7/09...10/24....2/10 (Read 192036 times)

Retro Rocket · « **Reply #500 on:** March 28, 2011, 04:03:51 PM »

Quote from: Tintop on March 28, 2011, 02:36:02 PM

So I figured this was the place to post the news, that a JMR billet barrel now resides in Canada.

Excellent TT, aren't they a work of art....

Did you go sleeves or Nikasil.?

Tintop · « **Reply #501 on:** March 28, 2011, 04:41:01 PM »

Quote from: Retro Rocket on March 28, 2011, 04:03:51 PM

Quote from: Tintop on March 28, 2011, 02:36:02 PM
So I figured this was the place to post the news, that a JMR billet barrel now resides in Canada.

Excellent TT, aren't they a work of art.... Did you go sleeves or Nikasil.?

It is definitely a work of art RR. They look great in pic's, but when you get to see it up close.

I was itching to unwrap everything, but instead just sat and stared.

It's a Nikasil barrel, JE pistons. Not sure if I will use the K3, or a K4 engine I have, as the bases.

Retro Rocket · « **Reply #502 on:** March 28, 2011, 06:34:05 PM »

I am intrigued to know how much cooler these will run not having sleeves to hold the heat....They sure do look pretty in person....

Tintop · « **Reply #503 on:** March 28, 2011, 06:56:02 PM »

Quote from: Retro Rocket on March 28, 2011, 06:34:05 PM

I am intrigued to know how much cooler these will run not having sleeves to hold the heat....They sure do look pretty in person....

Pretty is an understatement. I'll also wondering how much better these will cool. I use to have (

) a head temp gauge for the race kart. It used a thermal couple under the spark plug(s). Be interesting the get some base lines. Can't remember, are you going to use EFI?

MRieck · « **Reply #504 on:** March 28, 2011, 07:07:49 PM »

I will be making 10 more of these. It will be about 4 months from now as far as completion.....maybe sooner. I wrote a big check yesterday for the materials alone....they are coming and the evolution will continue

Tintop · « **Reply #505 on:** March 28, 2011, 07:14:26 PM »

Going to have to have you sign mine as a 'Series 1' Mike.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #506 on:** March 28, 2011, 09:50:28 PM »

I can see a big J M R etched across the face of the front fins

Just an idea considering it's a CNC job

Sam Green Racing · « **Reply #507 on:** March 29, 2011, 01:23:31 AM »

Quote from: MRieck on March 28, 2011, 07:07:49 PM

I will be making 10 more of these. It will be about 4 months from now as far as completion.....maybe sooner. I wrote a big check yesterday for the materials alone....they are coming and they the evolution will continue

Mike, I think it is fantasic what you have acheived with just a wooden pattern, a box of wet sand and 300 tubes of

JB weld.

Sam.

Retro Rocket · « **Reply #508 on:** March 29, 2011, 01:25:24 AM »

Billet head...?

Sam Green Racing · « **Reply #509 on:** March 29, 2011, 01:55:48 AM »

Bill/BentON Racing · « **Reply #510 on:** March 29, 2011, 07:07:46 AM »

Sam,you wanna go into the 10's?

??

You didn't happen to open up those cases?
Samauto 1000cc!!

,Bill

Tintop · « **Reply #511 on:** March 29, 2011, 08:45:03 AM »

Quote from: Jerry Rxman Griffin on March 28, 2011, 09:50:28 PM

I can see a big J M R etched across the face of the front fins Just an idea considering it's a CNC job

They already have JMR engraved were the displacement usually is.

Quote from: Retro Rocket on March 29, 2011, 01:25:24 AM

Billet head...?

DOHC billet head

Jerry Rxman Griffin aka MuthaF'er · « **Reply #512 on:** March 29, 2011, 11:28:22 AM »

Yeah, but I'm talking big here. Something that covers the entire frontal fin area with a slightly recessed JMR. That should only be a minor programming thing. About 3 or 4 times larger than this:

J M R

Doctor_D · « **Reply #513 on:** March 29, 2011, 12:30:13 PM »

Quote from: Jerry Rxman Griffin on March 29, 2011, 11:28:22 AM

Yeah, but I'm talking big here. Something that covers the entire frontal fin area with a slightly recessed JMR. That should only be a minor programming thing. About 3 or 4 times larger than this:

J M R

Classy! We'd want them inlaid with semi-precious stones, of course.

Leino · « **Reply #514 on:** March 29, 2011, 12:45:44 PM »

I knew this JMR stuff sounded familiar...

bear · « **Reply #515 on:** March 29, 2011, 01:08:53 PM »

Quote from: MRieck on March 28, 2011, 07:07:49 PM

I will be making 10 more of these. It will be about 4 months from now as far as completion.....maybe sooner. I wrote a big check yesterday for the materials alone....they are coming and the evolution will continue

Don't forget me!

Cheers,
Brian

Bill/BentON Racing · « **Reply #516 on:** March 29, 2011, 01:30:09 PM »

+1

,Bill

voxonda · « **Reply #517 on:** March 29, 2011, 01:44:53 PM »

I know I've seen that initials before. Must find a way to get that cash, then count me in too.

Rob

paulages · « **Reply #518 on:** March 30, 2011, 11:35:08 AM »

Everytime I see this thread, I picture Ahnold in sunglasses saying "who will pay" while holding a shotgun. Alternatively, I see Dirty Harry saying, "...who's gonna pay, kid?"

BLUE71TURBO · « **Reply #519 on:** March 30, 2011, 12:57:03 PM »

Quote from: paulages on March 30, 2011, 11:35:08 AM

Everytime I see this thread, I picture Ahnold in sunglasses saying "who will pay" while holding a shotgun. Alternatively, I see Dirty Harry saying, "...who's gonna pay, kid?"

Who's gonna pay the " MAFIA CHIMP " !!

Retro Rocket · « **Reply #520 on:** March 31, 2011, 03:07:12 PM »

Mike, i have read in a different thread on here that i will have to use different rings with the Nikasil, is this correct..?

http://forums.sohc4.net/index.php?topic=85494.msg973828;topicseen#msg973828

Mick

Tintop · « **Reply #521 on:** March 31, 2011, 04:18:09 PM »

Quote from: Retro Rocket on March 31, 2011, 03:07:12 PM

Mike, i have read in a different thread on here that i will have to use different rings with the Nikasil, is this correct..?

http://forums.sohc4.net/index.php?topic=85494.msg973828;topicseen#msg973828

Mick

Humm....read the other thread Mick. From what Mike posted there, the rings JE supplied with my pistons are good to go (with end gapping).

Sam Green Racing · « **Reply #522 on:** April 01, 2011, 01:51:20 AM »

I think Mick has his own pistons, if they are plated they will have to be swapped out for none plated ones, you can't run two hard surfaces against one another.

Sam.

Retro Rocket · « **Reply #523 on:** April 01, 2011, 04:07:48 PM »

Quote from: SamCB750A on April 01, 2011, 01:51:20 AM

I think Mick has his own pistons, if they are plated they will have to be swapped out for none plated ones, you can't run two hard surfaces against one another.

Sam.

I have one of Big Jay's 1000cc piston kits, they have no coating on them yet ,and when i do i will only coat the piston tops...

Tintop · « **Reply #524 on:** April 01, 2011, 07:01:14 PM »

Quote from: Retro Rocket on April 01, 2011, 04:07:48 PM

Quote from: SamCB750A on April 01, 2011, 01:51:20 AM
I think Mick has his own pistons, if they are plated they will have to be swapped out for none plated ones, you can't run two hard surfaces against one another.

Sam.

I have one of Big Jay's 1000cc piston kits, they have no coating on them yet ,and when i do i will only coat the piston tops...

Remember you mentioning you were going to have them coated.

News:

Author Topic: Billet blocks....who will pay...pics added 9/7/09...10/24....2/10 (Read 192036 times)