Author Topic: Do I sell this or get it fixed (video added 5/11)  (Read 5181 times)

0 Members and 1 Guest are viewing this topic.

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Do I sell this or get it fixed
« Reply #50 on: May 08, 2009, 09:29:12 PM »
like a "little" over correct timing. seems to make my bike and me happy.
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed
« Reply #51 on: May 08, 2009, 09:31:35 PM »
ok, see mine is at the right idle but still just doesnt want to get all the way to advance timing

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: Do I sell this or get it fixed
« Reply #52 on: May 08, 2009, 09:37:37 PM »
"Does not get to advance timing"..
 at what RPM ?
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Do I sell this or get it fixed
« Reply #53 on: May 08, 2009, 09:38:02 PM »
that shouldn't be a problem, can you ride it yet?

I bet its fine.

then again I don't have points anymore. so my memory of the dual points setup is hazy.
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed
« Reply #54 on: May 08, 2009, 09:41:31 PM »
at 3000k rpm it wont quite make it to the marks and even when i go higher it wont come any closer. Well i road it up and down the road last night just to check out the new master cylinder i put on and it seemed to run ok. We have s*** weather right now so wont get to ride till maybe sunday. On a side note the new master cylinder is interesting, i got the one off ebay, more modern one. Not sure if i got all the air out of the lines yet though.

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #55 on: May 11, 2009, 05:42:27 PM »
thought i would post a video of the bike running and see what guys thought about the way it sounds. I took this for a blowby video but posted another clip on another thread
[youtube=425,350]<object width="425" height="344"><param name="movie" value=" name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube]
« Last Edit: May 11, 2009, 05:46:23 PM by andy8190 »

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #56 on: May 11, 2009, 05:48:59 PM »
hmm... I have mine routed between the swingarm so I never really see it, but I don't think it's supposed to do that much blowin. mine's a 750 though so it could be different. sounds good though
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #57 on: May 11, 2009, 05:51:05 PM »
haha i switched videos real fast, i put the longer video up now, doesnt show the blowby as much on this thread

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #58 on: May 11, 2009, 06:07:48 PM »
so..... what's the problem?
thing sounds great
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #59 on: May 11, 2009, 06:18:46 PM »
not really a problem just wanted to get opinions on the sound, see if anything was off that i might not know. I am a newbie at this so I wasnt sure exactly of a good sound

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #60 on: May 11, 2009, 06:25:01 PM »
the only thing i can hear is it's not loud enough  ;D ;D
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #61 on: May 11, 2009, 06:34:36 PM »
hahahaha thats funny.

Offline martino1972

  • Expert
  • ****
  • Posts: 1,227
  • and still a expert welder,period...
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #62 on: May 11, 2009, 09:31:17 PM »
drive it like you stole it..... ;D ;D ;D

bike sounds fine to me,little bit crappy sound on camera,but don't see a lot of smoke or anything.....
bike looks nice......
Marti, I want you to know, I like you an awful lot, but guys have said far less and left wearing their drinks on their shirts.
http://forums.sohc4.net/index.php?topic=36933.0  (my bobber)

Offline andy8190

  • Expert
  • ****
  • Posts: 1,001
Re: Do I sell this or get it fixed (video added 5/11)
« Reply #63 on: May 11, 2009, 10:12:59 PM »
you cant see the smoke in this thread but if you go to my other thread "how much is too much blowby" you can see it in that one