Author Topic: How fast can you move your nuts?...Find out here (Read 2533 times)

texaninseattle · « **on:** May 05, 2009, 03:06:44 PM »

mlinder · « **Reply #1 on:** May 05, 2009, 03:34:28 PM »

I got 13 seconds at 100% efficiency. Hella fun.

scunny · « **Reply #2 on:** May 05, 2009, 03:44:36 PM »

useless bloody cart. 0% efficiency, I'm a broken man

Markcb750 · « **Reply #3 on:** May 05, 2009, 03:46:53 PM »

I cannot get the arrows to move the cart.

Must be me.

texaninseattle · « **Reply #4 on:** May 05, 2009, 03:47:51 PM »

did you use ROUND wheels?

mlinder · « **Reply #5 on:** May 05, 2009, 03:48:04 PM »

I cannot get the arrows to move the cart.

Must be me.

I made that mistake too. you cant use the 'line' tool for the wheels, like shown in the tutorial.

alltherightpills · « **Reply #6 on:** May 05, 2009, 03:54:50 PM »

68% efficiency.

Mlinder how did you do it in 13 seconds? Methinks you might be fibbing.

mlinder · « **Reply #7 on:** May 05, 2009, 03:56:13 PM »

68% efficiency.

Mlinder how did you do it in 13 seconds? Methinks you might be fibbing.

I'm not, I'll do it again, and take a screenshot. Just have to remember which design I got that time with... brb and will post screenie

mlinder · « **Reply #8 on:** May 05, 2009, 03:58:46 PM »

I just did it in 10 seconds with 100%.....

texaninseattle · « **Reply #9 on:** May 05, 2009, 04:00:31 PM »

BRAVO!...lets see the design?

mlinder the savant...who knew?

mlinder · « **Reply #10 on:** May 05, 2009, 04:02:24 PM »

BRAVO!...lets see the design?

mlinder the savant...who knew?

no WAY am I showing you the design.. at least not til everyone plays and recognizes me as WINNAR.

scunny · « **Reply #11 on:** May 05, 2009, 04:04:05 PM »

ok so you use the keyboard arrows

no wonder mine wouldn't go anywhere

texaninseattle · « **Reply #12 on:** May 05, 2009, 04:07:13 PM »

hail mlinder the weiner

mlinder · « **Reply #13 on:** May 05, 2009, 04:10:05 PM »

hail mlinder the weiner

Not weinar, WINNAR. Damn. No wonder I'm winning.

mlinder · « **Reply #14 on:** May 05, 2009, 04:15:47 PM »

I haven't figured out how the circles can be used as "complex joints" yet. Everything they stick to turns rigid, so there sno articulation. bummer.

texaninseattle · « **Reply #15 on:** May 05, 2009, 04:23:13 PM »

i attached the circle to a rod and used it to cap the top of my cart after the nut were in

mlinder · « **Reply #16 on:** May 05, 2009, 04:26:35 PM »

Oh, you can turn it after you make it?

scunny · « **Reply #17 on:** May 05, 2009, 04:27:51 PM »

well the extended forks and bobbed and slammed rear isn't a goer

texaninseattle · « **Reply #18 on:** May 05, 2009, 04:28:33 PM »

nah i used the force of acceleration to cause the circle to fly back and wedge itself in

texaninseattle · « **Reply #19 on:** May 05, 2009, 04:29:21 PM »

well the extended forks and bobbed and slammed rear isn't a goer

never has been

mlinder · « **Reply #20 on:** May 05, 2009, 04:35:33 PM »

nah i used the force of acceleration to cause the circle to fly back and wedge itself in

Ah, cool.

mlinder · « **Reply #21 on:** May 05, 2009, 04:42:05 PM »

i attached the circle to a rod and used it to cap the top of my cart after the nut were in

Wait, so you're saying your 'joints' actually work? Because my dont at all.

texaninseattle · « **Reply #22 on:** May 05, 2009, 04:47:40 PM »

yeah..i have made moveable plugs and internal baffels and all kinds of stuff

mlinder · « **Reply #23 on:** May 05, 2009, 04:54:32 PM »

yeah..i have made moveable plugs and internal baffels and all kinds of stuff

wtf are you talking about.

texaninseattle · « **Reply #24 on:** May 05, 2009, 04:55:42 PM »

wtf are you talking about?

News: