Topic: Jeff, Someone - I Need Help With CB750 Frame Measurements

[RRRToolSolutions]

Guys,

I've got one of the members here who is missing the frame rails cut/removed many years ago. Joe is getting one of my kits, but those don't normally include the tubes nor the triangulated brace.

I need someone to give me the outside diameter of the tubing of those removed rails, please. I have the inside measurement of course since I have the inserts, but I also need the OD. Can you also give me the distance between the downtubes and the boxed section there at the front of the seat? I want to provide him with more tubing than he'll need for both sides.

Help will be appreciated by both of us.

Regards,
Gordon

[martino1972]

if you can wait till tomorrow  morning,i can measure you that on a 1973 cb750...

[diggz_82]

"Help will be appreciated by both of us."

It sure would. Thanks again Gordon.

[754]

1.0 " O.D.

[KB02]

1.0 " O.D.

Yup, 1.0" OD or 25.5mm.

From the down tube to the Box section on my 78 is 18-1/8".

Hope this helps.

[RRRToolSolutions]

Thanks Bob, guys - this is perfect. I did not want to pull my tank off to get these.

I'll fix him up.

Best Regards,
gordon

[martino1972]

sooooooo....you got your measurements... cool.....

[RRRToolSolutions]

Martin, I did and thanks to you for the offer. I knew some members would have a frame naked to get these. Mine is all-together and behind some other bikes, so it was a lot easier to ask.

You guys are a great buch - the best of the net in my opinion!

Regards,
Gordon

[martino1972]

Martin, I did and thanks to you for the offer. I knew some members would have a frame naked to get these. Mine is all-together and behind some other bikes, so it was a lot easier to ask.

You guys are a great buch - the best of the net in my opinion!

Regards,
Gordon

oh,we got lot's of things naked.....