« previous next »
Pages: [1]   Go Down

Author Topic: Anyone one with 350F petcock parts?  (Read 579 times)

0 Members and 1 Guest are viewing this topic.

Offline TomL

  • Full Member
  • *
  • Posts: 99
Anyone one with 350F petcock parts?
« on: May 27, 2009, 07:18:39 PM »
Looking for the bottom petcock bowl for my 350f.  Mine seems to have sprung multiple leaks.  If anyone has one let me know.
Logged

Offline many408

  • Full Member
  • *
  • Posts: 58
Re: Anyone one with 350F petcock parts?
« Reply #1 on: May 28, 2009, 05:54:55 AM »
Quote from: TomL on May 27, 2009, 07:18:39 PM
Looking for the bottom petcock bowl for my 350f.  Mine seems to have sprung multiple leaks.  If anyone has one let me know.

Whaddya got, pinhole leaks or a bad seal?

Bad seal, get a new gasket.  Pinholes, wipe the inside with Seal-All.
Logged

Offline TomL

  • Full Member
  • *
  • Posts: 99
Re: Anyone one with 350F petcock parts?
« Reply #2 on: May 28, 2009, 08:03:51 AM »
More than a pin hole.  The drain screw in the bottom is stripped and there is a sizable hole in the side as well.  I have temporarily fixed it with a drill a tap and some set screws, as well as some JB weld for good measure.
Logged

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Anyone one with 350F petcock parts?
« Reply #3 on: May 28, 2009, 09:51:12 AM »
The bowl is the same as the 750.

The difference between the petcocks are the outlets....SIngle to the side vs double then down.
Logged
Stranger in a strange land
Pages: [1]   Go Up
« previous next »