« previous next »
Pages: [1]   Go Down

Author Topic: Texas CB350 Twin  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

TXCB350

  • Guest
Texas CB350 Twin
« on: June 07, 2009, 06:29:59 PM »
Hey guys, figured I'd post a few pics of my newest project.  I believe it's a '72 model CB350.  Sticker on the front frame is dated 10 of 71, so it could even be a late model 71.  I don't know where to run the vin.  It doesn't have a title, but I hear I can get one pretty easily.  I'm new to the motorcycle world, but it doesn't look too difficult.  I've been wrenching on chevy's for a long time and have had a vw super beetle project I've been working on the past couple of years.  Hopefully it won't take that long for the Honda.  It's in relatively good condition so it shouldn't take much.  I've already found a shop manual for it online that is gonna help a bunch.  Anyhow, enjoy the pics.





Little bit of rust on the tank, but I'm hoping to repair it.



That's right, less than 5500 original miles.

Logged

Offline johnspeck

  • Enthusiast
  • **
  • Posts: 122
Re: Texas CB350 Twin
« Reply #1 on: June 09, 2009, 08:49:12 AM »
that bolt shouldn't be in the tank, it looks pretty far gone.

cool start! my bike has the same build month.  good luck with your cb.
Logged

Offline BeSeeingYou

  • Old Timer
  • ******
  • Posts: 3,913
Re: Texas CB350 Twin
« Reply #2 on: June 09, 2009, 10:41:30 PM »
That tank looks like it may be good for straining spaghetti.
Logged

usedtoluvavdub

  • Guest
Re: Texas CB350 Twin
« Reply #3 on: June 10, 2009, 05:18:53 AM »
That bolt is prolly a bad thing. I have a stock 73 cb350 twin tank you can have if you are going that direction. It has a couple small dings that are an easy fix. lemme know if you want it. I'm in Ohio, but I'm sure freight won't be too bad.
Logged

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: Texas CB350 Twin
« Reply #4 on: June 10, 2009, 01:07:10 PM »
TXCB350,

BugMan,  good to see you made it over here!  I'm the one that sent you here from the Air Coolers.

Usedtoluvavdub,

What kind of V-dub did you "used to luv"?
Logged
CB550 Cafe, GL1000, Buell Ulysses
Quote from: dave500 on February 14, 2014, 03:53:33 AM
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

TXCB350

  • Guest
Re: Texas CB350 Twin
« Reply #5 on: June 10, 2009, 05:33:43 PM »
Thanks for sending me over bro.  There's alot of great info here, also seems like alot of great guys.
Logged

TXCB350

  • Guest
Re: Texas CB350 Twin
« Reply #6 on: June 12, 2009, 04:02:19 AM »
usedtolovadub you have a pm
Logged
Pages: [1]   Go Up
« previous next »