« previous next »
Pages: [1]   Go Down

Author Topic: CB350K4 carb question  (Read 1702 times)

0 Members and 1 Guest are viewing this topic.

Offline kuyarico

  • Hot Shot
  • ***
  • Posts: 349
CB350K4 carb question
« on: June 26, 2009, 10:12:23 AM »
(also posted in hondatwins.com, but I thought someone here might be able to help too)
I bought a K&L carb rebuild kit for my bike. The kit came with some extra bits and was missing a jet for ? Does anyone know what the mystery jet is? In my carbs, there was a little rubber stopper blocking the Pilot jet. I'm confused.



« Last Edit: June 26, 2009, 10:14:34 AM by kuyarico »
Logged

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: CB350K4 carb question
« Reply #1 on: June 26, 2009, 02:15:10 PM »
Secondary main jet.
Its the one you change when re-jetting.(always makes mid range run rich)

PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline kuyarico

  • Hot Shot
  • ***
  • Posts: 349
Re: CB350K4 carb question
« Reply #2 on: June 27, 2009, 07:05:21 AM »
Thanks PJ. Any idea why there's a stopper in the pilot jet?
Logged

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: CB350K4 carb question
« Reply #3 on: June 27, 2009, 07:21:45 PM »
Simple,(sort of) its so it has no effect at higher rpm.
Total fuel is metered by main jets, its fed from primary main.
 I posted on Honda twins as well, just in case you didnt check there.

PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'
Pages: [1]   Go Up
« previous next »