« previous next »
Pages: [1]   Go Down

Author Topic: replacing old hand controls???  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

19-r-e-d-75

  • Guest
replacing old hand controls???
« on: June 22, 2009, 08:16:00 PM »
i have a 75 cb360 that i am working on . just a quick project for the summer . i want to get rid of my old hand controls and get new ones, i am new to the fourm and bikes in general so please forgive the newbie questions. where can i get a nice but semi-cheap set of complete hand controls? thanks in advance.
Logged

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,610
Re: replacing old hand controls???
« Reply #1 on: June 22, 2009, 08:46:49 PM »
If you want new check Western Hills Honda in OH.  Used check eBay, or post in this forum under the wanted area.  Someone might have a used one.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

19-r-e-d-75

  • Guest
Re: replacing old hand controls???
« Reply #2 on: June 22, 2009, 08:55:17 PM »
sorry , forgot to say i am looking for aftermarket new hand controls . i have 2 sets on old original ones . i am just looking to do something different with this bike.
Logged

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: replacing old hand controls???
« Reply #3 on: June 23, 2009, 05:28:38 AM »
I replaced the controls on my old F1 with these:



I also replaced the other side with a newer product just to make them look a bit better and, in theory, work better than 30 year old electronics. I can't for the life of me find the starter/cutoff switch anymore. I know they're out there, though.

You'll have to get very friendly with your wiring diagram, though.  ;)
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

19-r-e-d-75

  • Guest
Re: replacing old hand controls???
« Reply #4 on: June 23, 2009, 09:40:24 PM »
i did not think it would be this difficult to find a set of aftermarket controls . i know someone here has to know where to get what i am looking for . maybe i will try a set off a Harley.   
Logged

Offline Green550F

  • Hot Shot
  • ***
  • Posts: 340
  • Nothing is as cool as that which you made.
Re: replacing old hand controls???
« Reply #5 on: June 24, 2009, 06:16:37 PM »
harley turn signal switches are different.  wouldn't work without major mods!
Logged
93 Kawasaki Voyager XII
70 Honda CL350 Cafe

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: replacing old hand controls???
« Reply #6 on: June 26, 2009, 11:05:56 AM »
You can use the starter/ cutoff switch from a newer (07) CBR.  We have them on my buddy's Cb500.  It takes a little figuring on the wiring though. 
Logged
CB550 Cafe, GL1000, Buell Ulysses
Quote from: dave500 on February 14, 2014, 03:53:33 AM
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

19-r-e-d-75

  • Guest
Re: replacing old hand controls???
« Reply #7 on: June 26, 2009, 08:10:19 PM »
i thanks those of you who replied to this . i was hoping for a simple answer to my question (ie:they have the at blank.com) i guess i am not that lucky . here is what i have planed , i will find a set of new aftermarket controls that fit my 7/8 bars and just rewire the bike . lets face it  , its just power ,ground and a few relays .... should not be too hard. if anyone has a simple wire diagram i could take a peek at let me know ..
Logged

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: replacing old hand controls???
« Reply #8 on: June 26, 2009, 09:50:53 PM »
ok,  easy answer   

http://www.mikesxs.net/products-60.html#products

You can mount up a set of these.  It will just take a little wiring work.  Should be easy enough.
Logged
CB550 Cafe, GL1000, Buell Ulysses
Quote from: dave500 on February 14, 2014, 03:53:33 AM
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

19-r-e-d-75

  • Guest
Re: replacing old hand controls???
« Reply #9 on: June 28, 2009, 02:17:12 PM »
ok . now thats going to be the ones i will use. thanks
Logged
Pages: [1]   Go Up
« previous next »