« previous next »
Pages: [1]   Go Down

Author Topic: Needed Pic Of rear F Shock mount on frame  (Read 830 times)

0 Members and 1 Guest are viewing this topic.

Offline Burke

  • Hot Shot
  • ***
  • Posts: 469
Needed Pic Of rear F Shock mount on frame
« on: June 13, 2009, 12:58:47 PM »
When taking the shocks off my 75 CB750F, The lh bold came out hard and the rh just snapped :o. Before I start into them I want to get a clear pic of what they are suppose to look like so I dont destroy everything.

Also I was almost sure that my old K model had the bol studs welded to the frame, is this right or am I high. :D

Thanks
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Needed Pic Of rear F Shock mount on frame
« Reply #1 on: June 13, 2009, 07:30:44 PM »
Yes, they are welded to the frame.

Easy fix, is to drill and tap them and insert stud, then you can re-use the Acorn nut.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Burke

  • Hot Shot
  • ***
  • Posts: 469
Re: Needed Pic Of rear F Shock mount on frame
« Reply #2 on: June 14, 2009, 04:37:33 PM »
Here is a pic of what I am dealing with. The small hole in the center is a hole I drilled to try to get an easy out in. As well as the bolt that was there

So I should drill these out, tap them and then insert a stud or just use a bolt or would it matter?
Logged

Offline Burke

  • Hot Shot
  • ***
  • Posts: 469
Re: Needed Pic Of rear F Shock mount on frame
« Reply #3 on: June 14, 2009, 04:40:28 PM »
Plus I wanted to thrown in a pic of my Triple tree top. I thought I did a decent job with the polish. ;D
Logged
Pages: [1]   Go Up
« previous next »