« previous next »
Pages: [1]   Go Down

Author Topic: stripped threads  (Read 1165 times)

0 Members and 1 Guest are viewing this topic.

Offline SOHC4ever

  • Enthusiast
  • **
  • Posts: 189
stripped threads
« on: June 30, 2009, 09:20:45 AM »
Uhg.

The big, bad motorcycle mechanic in me has been undone by the common bicycle.

The nut and bolt that holds the handlebars on my bicycle are in a rough state. The nut turns and turns and turns, but just won't un-thread. I suspect that I'll need a new set, but getting those out of there is real perplexing. I think I might be at hacksaw stage, but if someone can give me some insight that might avoid it, I'd be much obliged.

Thank you kindly.
Logged

Offline Laminar

  • Retsam
  • Master
  • *****
  • Posts: 1,632
Re: stripped threads
« Reply #1 on: June 30, 2009, 09:26:50 AM »
If you can get a flathead screwdriver between the nut and whatever it's squeezing up against, putting some pressure on it that way might help it grab whatever threads are left on the bolt. If not, you can always try a nut splitter, a dremel, or a hacksaw.
Logged

Offline Green550F

  • Hot Shot
  • ***
  • Posts: 340
  • Nothing is as cool as that which you made.
Re: stripped threads
« Reply #2 on: June 30, 2009, 07:39:08 PM »
+1 for the dremmel! they can do wonders in tight places!
Logged
93 Kawasaki Voyager XII
70 Honda CL350 Cafe

Offline razor02097

  • Not a fool, just an
  • Expert
  • ****
  • Posts: 767
  • Yes its a Honda You got an F'in problem with that?
Re: stripped threads
« Reply #3 on: July 01, 2009, 03:38:43 PM »
Quote from: Green550F on June 30, 2009, 07:39:08 PM
+1 for the dremmel! they can do wonders in tight places!

+10,000,000,000,000,000 for dremel
Logged
Project Rina

That is an inconceivably egregious transgression against my rudimentary concordance of socially shunned individuals.

Offline SOHC4ever

  • Enthusiast
  • **
  • Posts: 189
Re: stripped threads
« Reply #4 on: July 02, 2009, 10:15:43 AM »
BOOM!
1 flathead screwdriver and 1 "why didn't I think of that" moment and it's biz as usual. SOHC4.net to the rescue again.

Thanks to everyone.
Logged

Offline Laminar

  • Retsam
  • Master
  • *****
  • Posts: 1,632
Re: stripped threads
« Reply #5 on: July 02, 2009, 11:17:22 AM »
Awesome.
Logged
Pages: [1]   Go Up
« previous next »