Author Topic: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC  (Read 6026 times)

0 Members and 1 Guest are viewing this topic.

Offline myhondas

  • Not really such a
  • Expert
  • ****
  • Posts: 1,439
YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« on: June 29, 2009, 01:07:51 PM »
What shop is your favorite place to take you SOHC4 bike to have it worked on. What is the name of the shop and what mechanic do you trust or has the most knowledge about our old bikes? This is not meant to be a Classified thread but rather a resource of knowledge, parts, repairs sources.

Even if you do 90-100% of the work youself,       if you had to,        where would you go?



I will start with Phil's Cycle Shop at 1426 Crescent Lake Rd, in Waterford, MI 48327 (248) 673-6247 and Phil is know as "The Honda Doctor" Fantastic place!
« Last Edit: June 29, 2009, 01:27:44 PM by myhondas »
1974 CB 750 K4 SHOWROOM
1974 CB 750 K4 IN PART-OUT PROCESS (my original bike)
1965 C100 CUB 50 (PIT BIKE)
1996 VF 750 CD daily rider
1983 VF 1100 V65 Magna in restoration process
SOHC# 5105 11228

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #1 on: June 29, 2009, 01:20:19 PM »
This forum. There are only a handful of people in my fair city even willing to work on my sweet ride.
 
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #2 on: June 29, 2009, 01:24:01 PM »
If I cannot do it at home...

Mavrik Powersports. (that's me)
My full service parts/repair shop.

Rockton Power Sports (my riding buddy)
He's the 2-stroke guru and someone to bounce ideas off of as far as suspension.

Computer Cut (my uncle)
Full fabrication shop with both lathes and mills. Even wire edm machines.
« Last Edit: June 29, 2009, 01:31:22 PM by HavocTurbo »
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline Bodain

  • Hot Shot
  • ***
  • Posts: 519
  • I love the smell of fresh asphalt in the morning!
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #3 on: June 29, 2009, 01:25:20 PM »
ME!
2009 Suzuki TU250
2014 Honda Grom
1984 Kawasaki GPZ 750
2005 Yamaha Zuma 50
1974 Honda CB 750
1979 Kawasaki Z750 Twin

Offline Laminar

  • Retsam
  • Master
  • *****
  • Posts: 1,632
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #4 on: June 29, 2009, 01:30:53 PM »
Mark,

Please REREAD my original post   s l o w l y   and see what I am trying to accomplish here.... a resource of knowledge and shops.

This kind of info might be a bit more helpful in a specific regional context.

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #5 on: June 29, 2009, 01:31:49 PM »
I edited my original post myhondas to reflect your goal.
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline coldright

  • That's Ms.
  • Expert
  • ****
  • Posts: 934
  • to you
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #6 on: June 29, 2009, 01:32:11 PM »
Mark, Paulages, and (apparently) Marcus are good mechanics who all have shops... they don't hang professional signs and I'm quite certain Mark isn't interested in posting their personal numbers.  If someone in Portland would like to contact them they could do it through the forum... ie the avenue you provided via the post.  

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #7 on: June 29, 2009, 01:37:35 PM »
I'll try to stay with the spirit, and repeat what ms. oldright said.
In my area, the good people to talk to your SOHC4's about and get stuff done is

prosolar
paulages

and sometime me

We can all be contacted through the forum here.

We are in Portland, and are within about a half mile of each other.
No.


Offline martino1972

  • Expert
  • ****
  • Posts: 1,227
  • and still a expert welder,period...
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #8 on: June 29, 2009, 01:41:25 PM »
My own mechanic shop.... ;D ;D ;D ;D

Don't advertise,mouth to mouth advertising is the best.....small,just me working there......the only way to go... ;) ;)
Marti, I want you to know, I like you an awful lot, but guys have said far less and left wearing their drinks on their shirts.
http://forums.sohc4.net/index.php?topic=36933.0  (my bobber)

Offline medic09

  • Old Timer
  • ******
  • Posts: 2,666
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #9 on: June 29, 2009, 02:13:29 PM »
Motorsports in Albuquerque has a mechanic named Benny who used to ride a 750Four and service them back when they were current.  He's the guy I would turn to first.

No shops in Santa Fe that I'd really trust; but Dave Liggon could give it a go from his home garage.
Mordechai

'78 CB750K
'76 Triumph T160 Trident (rebuilding)
'07 aprilia Caponord

Santa Fe, NM

Offline OldSchool_IsCool

  • Really feeling like an
  • Old Timer
  • ******
  • Posts: 4,350
  • WARNING: Objects in mirror appear to be LOSING!
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #10 on: June 29, 2009, 02:37:03 PM »
In Battle Creek Michigan, I trust Shorty at Shorty's Cycle on Colombia.  I did a top-end overhaul this past winter and had him hone and measure the bores and rivet on a new cam chain.  He is semi-retired and has been working on these machines since they were new.  Hell, he was the ONLY shop in town that stocked a points file!!
Can I have a motorcycle when I get old enough?
If you take care of it.
What do you have to do?
Lot’s of things. You’ve been watching me.
Will you show me all of them?
Sure.
Is it hard?
Not if you have the right attitudes. It’s having the right attitudes that’s hard.

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #11 on: June 29, 2009, 02:39:40 PM »
North of Seattle....Adrian at Shiney Side Up ~ Everett, WA.
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Kinch

  • Enthusiast
  • **
  • Posts: 124
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #12 on: June 29, 2009, 02:49:49 PM »
Trophy Motorcycles in San Diego

http://www.trophymotorcycles.com/
1975 CB750 K5
1980 GS850L

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,810
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #13 on: June 29, 2009, 03:10:51 PM »
Dave Murre operates Murre's Salvage near Adell along Hwy 57 about 40 miles north of Milwaukee.  Phone: 920-994-9456  He is the only absolutely honest mechanic I have ever met. His work area can only hold one bike at a time because his small shop is packed with every known mechanical device.  He can make a frame, a threaded bolt, a bearing race, or step outside to his salvage yard and scavange the part you need from hundreds of chasis.  The good stuff is locked inside of a few truck-trailers.  Dave has built competition motors and bikes, and used to be a MX and flat-track racer.  When I take a project to him, usually in the winter, I park my enclosed trailer in his yard so he can store other customers bikes when he is working on mine.  Dave is also the President of the Kettle Moraine Riders M/C and sponsers an annual poker run, a hillclimb, and a dualsport ride.
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Ryan 550k

  • Guest
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #14 on: June 29, 2009, 03:14:50 PM »
I'll try to stay with the spirit, and repeat what ms. oldright said.
In my area, the good people to talk to your SOHC4's about and get stuff done is

prosolar
paulages

and sometime me

We can all be contacted through the forum here.

We are in Portland, and are within about a half mile of each other.

+1

Offline MJL

  • Don't listen to me, I'm no
  • Expert
  • ****
  • Posts: 1,162
  • Oh hell, what's one more bike?
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #15 on: June 29, 2009, 03:51:21 PM »
 I go to http://www.ehlerdingmotorsports.com/ for parts, so I'd go there for service if I had to.  they have several old Honda's on display and the last time I was there this was in the shop.

No matter how fast or how far I rode, I couldn't leave her memory behind.

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #16 on: June 29, 2009, 05:08:47 PM »
For engine work...Mike Rieck, near Boston, MA  ;)

For everything else....me or my SOHC friends in the Boston area.


cheers
Andy
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline 750Caferider

  • Crazed Idiot
  • Full Member
  • *
  • Posts: 70
  • 78 CB750 SS
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #17 on: June 29, 2009, 05:59:03 PM »
In Kansas City there are a few places...  My personal favorite is Cafe Racer in the West Bottoms just a stones throw from the stockyards.
Incredibly knowledgeable and fair prices.  It will take 3-4 weeks to get your bike back but that's only because they are that busy!  Saw an early 80's Bimoto, not to mention a ton of old horses.  Anyhow here's a link

http://www.caferacerinc.com/

Cheers,

Anders
78 CB 750F (Yoshimi)
Just picked up 3 early to mid 70's 750's Hell Yeah!
And a basketcase 70!!!!

Online Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,972
  • Saver of unloved motorcycles.
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #18 on: June 29, 2009, 06:00:32 PM »
Charlie Rice.  West Jersey Il. Owns a 69 too.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Accolay

  • Hot Shot
  • ***
  • Posts: 709
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #19 on: June 29, 2009, 07:09:52 PM »
I haven't even considered having anyone work on this bike. This is mainly because this is my first bike (in pieces still) and it's for my own learning experience. There might be some good mechanics in the Minneapolis area (I just don't know who they are). Maybe if I knew what I was doing and had the dough, I'd take it to somebody for regular maintenance.

I don't want to be that Harley guy I met who takes his bike to the shop for oil changes. I also don't want to break down in the middle of nowhere and not be able to at least figure out what's wrong.
1977 CB550F

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: YOUR FAVORITE KNOWLEDGABLE SOHC4 BIKE SHOP/MECHANIC
« Reply #20 on: June 29, 2009, 07:37:33 PM »
As others have already stated, I like my own shop the best!

I will start with Phil's Cycle Shop at 1426 Crescent Lake Rd, in Waterford, MI 48327 (248) 673-6247 and Phil is know as "The Honda Doctor" Fantastic place!

The only problem with Phil is that he knows he's the only one around these parts that works on these bikes and charges through the nose for it...

I'd recommend Honda Suzuki of Warren at 30822 Ryan Road Warren, MI 48092 (Ryan Road Just South of 13 Mile Road) 586-751-1200

Joe Dumka runs the service department and has worked on Hondas for over 35 years. Very knowledgable and doesn't mind you picking his brain about a bike problem.
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen