« previous next »
Pages: [1]   Go Down

Author Topic: CB750a Carb question  (Read 2804 times)

0 Members and 1 Guest are viewing this topic.

Hambone

  • Guest
CB750a Carb question
« on: June 15, 2009, 04:51:27 PM »
I'm getting ready to rebuild my 1977 CB750a carbs and had a couple of questions. I think the standard carbs on the f and k models are 28mm and the a are 24mm. Has anyone with an a model added pod air filters? Since the center bore is different can I assume the pod is also? The bike has a pipe on it, if I add the pods any idea on what I should do as far as jetting?
Logged

Hambone

  • Guest
Re: CB750a Carb question
« Reply #1 on: June 16, 2009, 12:57:01 PM »
Anyone have any ideas?
Logged

Offline Inkscars

  • grumpiness comparable to an
  • Old Timer
  • ******
  • Posts: 3,344
  • I have a box. I'm used to being ignored.
Re: CB750a Carb question
« Reply #2 on: June 16, 2009, 01:10:21 PM »
Yours is a hondamatic?
Does it have PD carbs on it or the old style?
Logged
And who the hell named us; click-click-click-click-click-click

81 Hardly Davisson

Offline Spanner 1

  • Old Timer
  • ******
  • Posts: 4,092
  • CB 750 K0 ( always thought it was a K1!) + CB750K8
Re: CB750a Carb question
« Reply #3 on: June 16, 2009, 01:49:20 PM »
Yep, you have 24mm PD type carbs....pods to fit would be smaller diameter than K or F pods ( 28mm ). Stock main jets are 102's on your bike, with 4into1 exhaust and pods, I'd try 105 or 110 main jets......trial and error really.......
Logged
If your sure it's a carb problem; it's ignition,
If your sure it's an ignition problem; it's carbs....

Hambone

  • Guest
Re: CB750a Carb question
« Reply #4 on: June 16, 2009, 03:31:54 PM »
Spanner, Thanks so much. Is there a place on my carbs I can measure, so I can order pods that fit? i.e. does the pod need to have a 24mm opening or is that the venturi opening on the carb?
Logged

Offline Spanner 1

  • Old Timer
  • ******
  • Posts: 4,092
  • CB 750 K0 ( always thought it was a K1!) + CB750K8
Re: CB750a Carb question
« Reply #5 on: June 16, 2009, 05:58:30 PM »
As far as I know they would just be 24mm pods, i.e. they are sized to fit 24mm venturi.
Logged
If your sure it's a carb problem; it's ignition,
If your sure it's an ignition problem; it's carbs....
Pages: [1]   Go Up
« previous next »