« previous next »
Pages: [1]   Go Down

Author Topic: Some pics of Jerry's "The RX Man" head...  (Read 1424 times)

0 Members and 1 Guest are viewing this topic.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,594
  • Big ideas....
Some pics of Jerry's "The RX Man" head...
« on: June 29, 2009, 11:51:19 AM »
Well...it's not Jerry's actual head (it wouldn't fit in a single photo). ;) ;) 5mm valve conversion with the 34mm intake valves....it should move some charge. ;)
Logged
Owner of the "Million Dollar CB"

Offline burmashave

  • Forum Immoderator
  • Old Timer
  • ******
  • Posts: 2,876
    • burmashave.net
Re: Some pics of Jerry's "The RX Man" head...
« Reply #1 on: June 29, 2009, 11:59:09 AM »
Man, that looks sweet. Does this push your CB closer to $2 million?
Logged
Quote from: SOHC Digger, RIP
'Ere's whatcha do, Guvna', just throw a couple dookie logs in the hearth and bob's your uncle!
'77 CB750k

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: Some pics of Jerry's "The RX Man" head...
« Reply #2 on: June 29, 2009, 12:08:13 PM »
Is that for Jerry's 900 or 1000 motor? I am going to have to live vicariously through his exploits while I wait for finances to return :P
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,070
  • I REALLY? hate black rims.
Re: Some pics of Jerry's "The RX Man" head...
« Reply #3 on: June 29, 2009, 02:29:45 PM »
Quote from: MRieck on June 29, 2009, 11:51:19 AM
Well...it's not Jerry's actual head (it wouldn't fit in a single photo). ;) ;) 5mm valve conversion with the 34mm intake valves....it should move some charge. ;)

Nice work Murphy, to nice to put on a bike, should have a frame round it.  :D :D :D :D :D :D :D

Sam. ::)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,933
  • Bought her new 4/75
Re: Some pics of Jerry's "The RX Man" head...
« Reply #4 on: June 29, 2009, 03:01:13 PM »
oooh  oooh  oooh  oooh   oooh  aaahhhhh........  Damn, I feel much better now  ;)  ;D

Mike,

Damn, those chambers are shinier than my actual head! And you're correct, you'd need a panoramic camera  ;D You've outdone yourself my talented friend. Can you do me a favor and pull the studs if you haven't? I have a new stainless set.

Sean,

The other Stage III head Mike did with the 33.5mm intakes is for the 1000. This is the Stage IV head with the 34mm valves & 5mm stems for the 900. Lighter and bigger to make up for 100 less cc's. That and along with the APE crank with the Carrillos it oughta scream!!  Wooohooooooooo.....

Burma,

I use the installment plan and don't count. $500 this month, $1000 the next, etc. It's been going on a LOOOOONG time though. Probably close to $15K (hopefully) by the time I'm done.

Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,485
Re: Some pics of Jerry's "The RX Man" head...
« Reply #5 on: June 29, 2009, 03:08:49 PM »
Nice work Mike.

You better have something blocking those intakes Jerry or you might suck small children through on the way by!
Logged

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,070
  • I REALLY? hate black rims.
Re: Some pics of Jerry's "The RX Man" head...
« Reply #6 on: June 29, 2009, 03:24:14 PM »
 ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,594
  • Big ideas....
Re: Some pics of Jerry's "The RX Man" head...
« Reply #7 on: June 29, 2009, 04:08:20 PM »
 Thanks guys. Yes...I'll pull the studs for you Jerry. I wanted to get the head to the machinist today but it will be tomorrow. My son and I were breaking down Ben's (azuredesign) 750 secondary to a top end oiling problem. That in itself is a story I'll share later as the source of the problem was very, very unusual. Boy...I give the kid an impact gun and he actually seems to have fun (it's his blue in the first pic).
Logged
Owner of the "Million Dollar CB"

Offline NitroHunter

  • Radical Street / Strip Turbo
  • Hot Shot
  • ***
  • Posts: 714
  • A man's motorcycle is a reflection of the man
Re: Some pics of Jerry's "The RX Man" head...
« Reply #8 on: June 29, 2009, 04:38:17 PM »
Beautiful piece! What CFM did it flow?
Logged
Robbie the NitroHunter                      Fuel Coupe Hired Gun                  NHRA T/F 640

DRAGBIKE USA XH/MB Recordholder: http://forums.sohc4.net/index.php?action=dlattach;topic=127179.0;attach=332735
DRAGBIKE USA XH/SS Recordholder: http://forums.sohc4.net/index.php?action=dlattach;topic=63940.0;attach=103300
Young mans glory days in the lanes: http://forums.sohc4.net/index.php?action=dlattach;topic=45685.0;attach=66341

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,942
Re: Some pics of Jerry's "The RX Man" head...
« Reply #9 on: June 29, 2009, 04:59:24 PM »
Great work Mike and I think Ill need to go visit Jerry to test ride it for the old man  ;) ;D

Looking to hearing about Bens top end oiling problem....

cheers
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350
Pages: [1]   Go Up
« previous next »