Topic: Exhaust ID ? Yosh? Please

[Swoop]

Hi

The collector / header is what I am looking at....would it be yosh....or other.

Obviously the can is Yosh.

Thanks for your help.

Steve

[bryanj]

Bends too sharp for a classic Yosh

[Steve F]

Looks like the Kerker on the red bike

[MRieck]

That is a full Yosh pipe....the Kerker collector has a midpipe attached to it the is about 12" long which the baffle clamps to. The pipe shown has a long midpipe which the cannister attaches to. It looks exactly like a Yosh pipe I had on my FJ1200

[754]

Is there 3 generations of Yoshi headers

I have a couple sets with bigger radii than those, but not a full single radius like on 736ccs bike.

[Industrial Cafe]

It looks similar to the yoshi on mine, minus the can, I never saw one with that, I had a slip in baffle.

[MRieck]

Is there 3 generations of Yoshi headers

I have a couple sets with bigger radii than those, but not a full single radius like on 736ccs bike.

They are probably up to 5 or 6 generations now. That bike is typical of what they made for stuff in the mid/late 80's through the mid/late 90's. Their Duplex pipes were different but the primary bends were still conventional. The FJ pipe I had wasn't very good in regards to power. The mid pipe diameter was way to large.