Author Topic: 1967 Honda S90 project. (Read 57884 times)

tomkimberly · « **Reply #100 on:** October 23, 2009, 05:33:18 AM »

Here is the front brake hub all cleaned up and ready for paint.

Tom

hoodellyhoo · « **Reply #101 on:** October 23, 2009, 08:23:39 AM »

Looking good! Keep up the great updates!

tomkimberly · « **Reply #102 on:** October 23, 2009, 06:47:28 PM »

Here is the front hub all painted.

Tom

tomkimberly · « **Reply #103 on:** October 23, 2009, 06:49:55 PM »

Front brake plate painted.

Tom

tomkimberly · « **Reply #104 on:** October 23, 2009, 06:52:23 PM »

I cleaned up and did a mock assembly of the front and rear axles. I had a darned of a time laying out the rear one as the PO had it backwards!

Tom

tomkimberly · « **Reply #105 on:** October 23, 2009, 06:54:56 PM »

Front fork caps all refinished.

Along with the front brake cam lever arm and special nut.

Tom

tomkimberly · « **Reply #106 on:** October 23, 2009, 06:59:17 PM »

Carb intake all refinished. This was nasty when I started, much sanding, polishing, removal of years of lime build up. I worked on this for weeks of and on. I think it came out very good!

Tom

tomkimberly · « **Reply #107 on:** October 24, 2009, 11:08:52 AM »

Let's move onto the throttle assembly and handle bars.

Before:

tomkimberly · « **Reply #108 on:** October 24, 2009, 11:13:38 AM »

Before I forget, the ports in the handle bars.

This one is for the throttle cable.

The next two are for the switch wires.

And the switch wires come out here.

tomkimberly · « **Reply #109 on:** October 24, 2009, 11:17:28 AM »

The throttle tube and bits cleaned up real nice. I'm going to use a silicon type lube here when I put it all back together.

Tom

tomkimberly · « **Reply #110 on:** October 24, 2009, 11:19:15 AM »

Rear pegs all cleaned up!

Tom

tomkimberly · « **Reply #111 on:** October 24, 2009, 11:21:50 AM »

I sure hope those of you who are following this are learning something.

Doing the actual work and documenting it all seems like doing double duty.

Tom

tomkimberly · « **Reply #112 on:** October 24, 2009, 08:42:36 PM »

The wheel bearings I ordered came in todays mail. Might as well install them!

First the prep work, remove the bearings for the packaging and chill them down in the freezer for at least 1 hour.

Select a socket that is just a little bit smaller in diameter than the bearing.

Heat the hub to about 175 - 200 deg F in your oven (make sure the wife is not at home or you just might get in trouble!

Sometimes the bearing just drops right in, other times you need to tap it in.

tomkimberly · « **Reply #113 on:** October 24, 2009, 08:47:14 PM »

The previous post was the rear sprocket hub, here is the front and rear brake hubs.

Each of these get two bearings, one on each side.

Tom

crazypj · « **Reply #114 on:** October 25, 2009, 01:44:33 PM »

you did fit the spacer tube between bearings? (its just that you dint mention it and it doesn't look like its in there)

PJ

tomkimberly · « **Reply #115 on:** October 25, 2009, 03:24:03 PM »

Ha! Good eyes! Yes I did, the second time around, good thing I ordered extra bearings.

Tom

tomkimberly · « **Reply #116 on:** October 26, 2009, 09:20:18 PM »

Does anyone have a left hand perch / switch assembly they would be willing to sale for a reasonable price?

Tom

TomC · « **Reply #117 on:** October 29, 2009, 04:44:42 PM »

Hi Tom
It might help if you were to mention exactly which one you need. There are a number of different ones listed in the Parts List. Which goes by frame number and country sold in. Not the year of the motorcycle.
TomC in Ohio

Quote from: tomkimberly on October 26, 2009, 09:20:18 PM

Does anyone have a left hand perch / switch assembly they would be willing to sale for a reasonable price?

Tom

tomkimberly · « **Reply #118 on:** March 14, 2010, 08:48:24 PM »

Just an update to all who were following this thread, I have at last located the correct spokes for both the front and rear wheels and will start up this thread in a few weeks.

It also looks like I need to upgrade my picture hosting.......

Tom

strynboen · « **Reply #119 on:** March 15, 2010, 12:18:28 AM »

we are vating..

,,love to see small hondaes..komming back to live...

Greggo · « **Reply #120 on:** December 07, 2010, 07:44:12 PM »

Bump bump bump

Is she finished? I've been hunting for one of these.

859Bryan · « **Reply #121 on:** January 20, 2011, 02:52:33 PM »

Tom,
When you were searching for parts, how did you know what would fit and what wouldn't when buying the stuff from Asia? I am having a difficult time finding the wiring harness. I have a 69? S90 Frame # S90-478916. Any help would be greatly appreciated.
Bryan

tomkimberly · « **Reply #122 on:** January 20, 2011, 08:52:01 PM »

Quote from: Greggo on December 07, 2010, 07:44:12 PM

Bump bump bump Is she finished? I've been hunting for one of these.

Sadly, not yet. I have run into some health issues and work on this project has come to a stop. I hope to be able to move forward by summer (provided my leg heals).

The remaining items are finding another carb body or carb assy and working out any wiring problems.

Tom

tomkimberly · « **Reply #123 on:** January 20, 2011, 08:58:24 PM »

Quote from: 859Bryan on January 20, 2011, 02:52:33 PM

Tom,
When you were searching for parts, how did you know what would fit and what wouldn't when buying the stuff from Asia? I am having a difficult time finding the wiring harness. I have a 69? S90 Frame # S90-478916. Any help would be greatly appreciated.
Bryan

Best guess? Yes I did order the wrong part a few times (spokes for one). For the wire harness, the one I had was just a bits and pieces and the back of the key switch was missing. What I did was match up the wire harness to fit/match the key switch connector. I do plan on having to perform a little trouble shooting with the wiring however I do have on of those Vintage Connection kits to make it look all good.

Hopefully TomC will chime in and let you know what issues he has run into during his restores.

Tom

859Bryan · « **Reply #124 on:** January 22, 2011, 04:06:10 PM »

Thanks, I will post some pictures after I really get started. It is just a bead blasted frame at this point.

News:

Author Topic: 1967 Honda S90 project. (Read 57884 times)

859Bryan

859Bryan