Hi All...you might remember me from my "oil circulation" problem post and my favorite problem bike, my Honda CB750 K (1976)...why doesn't she love me back!?
Anyways...to bring you up to speed, I have disassembled the clutch, so the clutch basket is empty...the friction disks and metal plates have been removed. I run the bike for two minutes (i'm in the garage and will suffocate if i go much longer, okay, at least get a headached)...and no oil is being emitted from the end of the shaft (countershaft?)...there that hole at the end of the shaft where i believe lubrication should be spitted out onto the spinning discs?
What do I do now?...and yes, I cleaned the mesh oil screen on the oil pump already (result of last post). I have new frictions disks ready to go on but whats the point if no oil is going to be there. The old discs I removed were oily but not dripping in oil.
Please help...a poster previously had something about an o-ring if leaking would then fail to force oil up into the shaft??? or a plug which might pushed in to far...I've never been able to locate these parts on the fiche.
...thanks!!!..ron.