Author Topic: ALUMINUM CB750 SIDE COVERS UPDATE (Read 14413 times)

Terry in Australia · « **Reply #25 on:** August 02, 2009, 09:57:02 PM »

Yeah, don't make 'em like those "Maier" aftermarket sidecovers, I've got a set here somewhere that came with some other parts I bought, and they really look like schidt. Cheers, Terry.

mrosso · « **Reply #26 on:** August 23, 2009, 01:28:39 PM »

Any update on the side covers?

BLUE71TURBO · « **Reply #27 on:** August 23, 2009, 01:37:02 PM »

Trying to save up the startup funds. It is not cheep.

Terry in Australia · « **Reply #28 on:** September 10, 2009, 05:25:56 AM »

I was talking to a guy I know who was checking out a 1971 CB750P (cop bike) and guess what? It had aluminum side covers! If I was there, I'd have offered the seller a pair of "genuine" sideys for a swap! Cheers, Terry.

mrosso · « **Reply #29 on:** September 25, 2009, 01:41:57 PM »

Is this project dead?

BLUE71TURBO · « **Reply #30 on:** September 25, 2009, 08:08:29 PM »

Not really. I'm still trying to get the money to start it up. The way things are going with this economy it will be a while.
I have some other ideas for the old honda's, but that too will be a while later.

Beans · « **Reply #31 on:** September 25, 2009, 08:15:22 PM »

for the insert why not do a Zeus fastener type mechanism . something that fits in the slit sideways and then you turn it one way and it fit tight. they won't fall off and you won't have to find a wrench if your stuck on the side of the road.

Tower · « **Reply #32 on:** September 27, 2009, 08:15:24 AM »

@BLUE71TURBO, if you haven't thought of this already...perhaps the folks that chimed in with "put me down for a pair" could help you seed the project by providing a partial deposit on their order?

bikebitzofvt · « **Reply #33 on:** September 27, 2009, 12:40:58 PM »

Quote from: Popwood on July 28, 2009, 10:30:05 AM

My bike's PO put on a cheezy plastic side cover and it screws on from the front. The screw fastens to a threaded part that inserts in the hole where the tang went. The treaded part is made much like a the type of dry wall anchor that pushes through the hole, but when tightened, the part inside the wall is forced to collapse holding the fastener in place. It must be an off the shelf item. One good feature is once tightened, stays in the same place so the screw hole in the cover is always aligned. Could be a solution here!

Sounds like they use a wellnut - many late model sport bikes use them to mount the bodywork & windscreens. Likely Maier parts...

Ricky_Racer · « **Reply #34 on:** September 27, 2009, 01:50:04 PM »

Just FYI... A set sold on eBay last week for $107. Another set, painted with a matching tank, sold about a month ago for $199 (if I remember correctly..). They still come up occasionally. RR

pkmay · « **Reply #35 on:** January 30, 2011, 05:45:23 PM »

I just put a pair of MPD CB750 sidecovers on ebay if anyone is interested. I never saw another pair in person and curiosity brought me here. You can see them at:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320650596169&ssPageName=ADME:L:LCA:MOTORS:1123[/b]

Elan · « **Reply #36 on:** January 30, 2011, 06:26:33 PM »

Quote from: pkmay on January 30, 2011, 05:45:23 PM

I just put a pair of MPD CB750 sidecovers on ebay if anyone is interested. I never saw another pair in person and curiosity brought me here. You can see them at:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320650596169&ssPageName=ADME:L:LCA:MOTORS:1123[/b]

whoaaa i didnt know those existed. I'm sure i'll get out bit one those!

Terry in Australia · « **Reply #37 on:** January 30, 2011, 08:25:21 PM »

Hey Jon, why not have a chat to Joe about casting some of his finned sidies in aluminum? I'd be up for a set!

754 · « **Reply #38 on:** January 31, 2011, 08:10:57 PM »

PK, that is one of the RAREST goodies ever made for a cb 750... pretty cool. I got a couple of his Weber manifolds... for 750s..

And I just loved the Magnacycle...

Elan · « **Reply #39 on:** February 01, 2011, 06:34:35 AM »

Quote from: 754 on January 31, 2011, 08:10:57 PM

PK, that is one of the RAREST goodies ever made for a cb 750... pretty cool. I got a couple of his Weber manifolds... for 750s..

And I just loved the Magnacycle...

SHHHHHHHHH

swellguy · « **Reply #40 on:** February 01, 2011, 08:42:40 AM »

These ones are cool:

Elan · « **Reply #41 on:** February 01, 2011, 08:50:14 AM »

Quote from: swellguy on February 01, 2011, 08:42:40 AM

These ones are cool:

whoooaaaaaa are those for sale somewhere?

swellguy · « **Reply #42 on:** February 01, 2011, 08:58:56 AM »

Quote from: Elan on February 01, 2011, 08:50:14 AM

whoooaaaaaa are those for sale somewhere?

Yes they are:

http://japan.webike.net/products/9357669.html

http://japan.webike.net/products/9357730.html

Toxic · « **Reply #43 on:** February 01, 2011, 01:14:29 PM »

35,000 yen or $430.00 USD for the unpainted ones.

Elan · « **Reply #44 on:** February 01, 2011, 01:19:18 PM »

Quote from: Toxic on February 01, 2011, 01:14:29 PM

35,000 yen or $430.00 USD for the unpainted ones.

yeah i laughed a little when I saw that. I think i'd rather buy a second bike!

tango911 · « **Reply #45 on:** February 01, 2011, 02:11:57 PM »

Quote from: Elan on February 01, 2011, 01:19:18 PM

Quote from: Toxic on February 01, 2011, 01:14:29 PM
35,000 yen or $430.00 USD for the unpainted ones.

yeah i laughed a little when I saw that. I think i'd rather buy a second bike!

agreed

Retro Rocket · « **Reply #46 on:** February 01, 2011, 02:20:35 PM »

Quote from: swellguy on February 01, 2011, 08:58:56 AM

Quote from: Elan on February 01, 2011, 08:50:14 AM
whoooaaaaaa are those for sale somewhere?

Yes they are:

http://japan.webike.net/products/9357669.html

http://japan.webike.net/products/9357730.html

Yamiya has them as well....

Mick

Terry in Australia · « **Reply #47 on:** February 01, 2011, 08:44:46 PM »

Quote from: Toxic on February 01, 2011, 01:14:29 PM

35,000 yen or $430.00 USD for the unpainted ones.

Or only 425 Aussie dollars, bargain!

HRC1966 · « **Reply #48 on:** February 11, 2012, 04:45:58 AM »

So just seen this thread, what is the progress on making cast aluminium side covers then? Sand cast motors deserve sand cast side covers too..

News:

Author Topic: ALUMINUM CB750 SIDE COVERS UPDATE (Read 14413 times)

pkmay