« previous next »
Pages: [1]   Go Down

Author Topic: K8 replacement petcock.  (Read 953 times)

0 Members and 4 Guests are viewing this topic.

Offline cb750k7

  • Hot Shot
  • ***
  • Posts: 427
  • My CB AKA Charlie Brown...(K8 frame with K6 engine
K8 replacement petcock.
« on: July 25, 2009, 02:05:55 AM »
Hi,

Please advise if this petcock will fit a K8 tank.

http://www.z1enterprises.com/detail.aspx?ID=1744

Any one has an experience with this aftermarket?

Cheers

Jona
Logged
Found real friends here !!!

Offline pddpimp

  • Hot Shot
  • ***
  • Posts: 342
Re: K8 replacement petcock.
« Reply #1 on: July 25, 2009, 05:40:22 AM »
I'm not sure about that petcock.
I have rebuilt the 77-78 petcocks with some ease.
Drill out the two rivets, tap the holes, replace the o-rings, and bolt together.
This way, in the future, it's easy to do it again.
Logged
When the majority of the United States population get to be 70 years old, they will finally realize what is really important. And by then it'll be too late.


-'77 CB750 Cafe/Muscle bike (early clone)
Soon to have a hopped up 836cc *sold*

-'75 CB750 with a little bit of character

Offline cb750k7

  • Hot Shot
  • ***
  • Posts: 427
  • My CB AKA Charlie Brown...(K8 frame with K6 engine
Re: K8 replacement petcock.
« Reply #2 on: July 25, 2009, 05:46:19 AM »
TNX

Can you please give the O ring specs?

Jona
Logged
Found real friends here !!!

cycleman

  • Guest
Re: K8 replacement petcock.
« Reply #3 on: July 25, 2009, 07:07:43 AM »
I've had pretty good success with old petcoks that have gone stiff.  I remove them, put some transmission fluid in the inlet or reserve area & let it soak for a bit then move the petcock through its range of motion.
Logged

Offline hapakev

  • Your Standard
  • Hot Shot
  • ***
  • Posts: 521
Re: K8 replacement petcock.
« Reply #4 on: July 25, 2009, 12:07:31 PM »
Quote from: cb750k7 on July 25, 2009, 05:46:19 AM
TNX

Can you please give the O ring specs?

Jona

Honda Part # 16955-268-020

Like $5 at your local honda dealer.
Logged
Smoking Jack
1978 CB750F(ish)

"Keep moving forward, until you can no longer move" KP

Offline cb750k7

  • Hot Shot
  • ***
  • Posts: 427
  • My CB AKA Charlie Brown...(K8 frame with K6 engine
Re: K8 replacement petcock.
« Reply #5 on: July 25, 2009, 12:41:07 PM »


[/quote]

Honda Part # 16955-268-020

Like $5 at your local honda dealer.
[/quote]


Thank you.
Logged
Found real friends here !!!
Pages: [1]   Go Up
« previous next »