« previous next »
Pages: [1]   Go Down

Author Topic: what torque do these bolts need  (Read 1081 times)

0 Members and 1 Guest are viewing this topic.

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
what torque do these bolts need
« on: July 31, 2009, 02:57:41 PM »
i have a k6 750 motor and i cant find the torque specs for the 4 6mm bolts that go under where the "pucks" in the cylinder head are. theyre a 10mm head with a 6x1.00 thread and the factory manual doesnt show the torque. i torque the 12mm head bolts to 22 Nm
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: what torque do these bolts need
« Reply #1 on: July 31, 2009, 03:19:15 PM »
'78 Honda Manual shows 7.2 - 10.1 ft/lbs for 6mm flanged bolts.
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: what torque do these bolts need
« Reply #2 on: July 31, 2009, 03:23:26 PM »
thanks!
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894
Pages: [1]   Go Up
« previous next »