« previous next »
Pages: [1]   Go Down

Author Topic: Air Screw on a CB360  (Read 1455 times)

0 Members and 1 Guest are viewing this topic.

Offline Burke

  • Hot Shot
  • ***
  • Posts: 469
Air Screw on a CB360
« on: August 01, 2009, 05:36:57 pm »
On a CB360, how many turns out for the air screw is the stock adjustment?
I could not find it in the manual.
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Air Screw on a CB360
« Reply #1 on: August 02, 2009, 12:12:22 pm »
I haven't see a factory setting for the 360 idle mix screw, either.  I'd suggest just starting with 1 1/2 or 2 turns out and then following the procedure for setting them for your specific bike.  IME, factory settings on these screws are just starting points anyway. 
Logged

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: Air Screw on a CB360
« Reply #2 on: August 02, 2009, 12:34:45 pm »
Its a fuel screw, one and half turns out is good starting point

PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: Air Screw on a CB360
« Reply #3 on: August 02, 2009, 02:24:43 pm »
My old chiltons says 1 turn.   Rode mine for a good ride today.  Hated it didnt enjoy it at all.   ;D ;D ;D ;D
Logged
18 grand and 18 miles dont make you a biker
Pages: [1]   Go Up
« previous next »