« previous next »
Pages: [1]   Go Down

Author Topic: XS650 fork tubes with CB550 sliders  (Read 1386 times)

0 Members and 1 Guest are viewing this topic.

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
XS650 fork tubes with CB550 sliders
« on: August 06, 2009, 08:55:37 AM »
Will it work? They are the same diameter outside, but would the internals (Damper rod) match up? Does anyone know if there is a legnth difference?

Good price on tubes here
http://www.mikesxs.net/products-19.html#products
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: XS650 fork tubes with CB550 sliders
« Reply #1 on: August 06, 2009, 04:21:57 PM »
Looks like I'm on my own on this one.
Time to visit the NOS area of the yamaha shop and compare tubes.
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline karmasic

  • pull-a-part boy
  • Full Member
  • *
  • Posts: 69
Re: XS650 fork tubes with CB550 sliders
« Reply #2 on: August 07, 2009, 09:12:59 AM »
$129 is good if you have a yami. but for all the work required i would spend the extra $20 and get some from http://cyclexchange.net/Honda%20Page.htm that will mount right up. get -1 or -2. you'll have to measure, i know the 550 is shorter the the 750 by an inch or more.

might as well do it right, especially if right is easier.  ;D

good luck.
Logged
Pages: [1]   Go Up
« previous next »