« previous next »
Pages: [1]   Go Down

Author Topic: Honda 360 question  (Read 1127 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Honda 360 question
« on: August 05, 2009, 10:01:17 AM »
Friend called...has a 74 Honda 360 that ran last year.  Says no spark.  Took off side points cover and he had oil there.  Am I correct like with the 750's there should be no oil under the points cover?  I have not had a chance to see the bike yet.  He said his coils have a honeycomb look to them like they boiled over...my guess is he needs new coils.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Honda 360 question
« Reply #1 on: August 05, 2009, 11:59:15 AM »
On the 360 the points are run off of the left side of the camshaft on the top of the engine, so he should definitely not have any oil in there.  I've never seen coils with a "honeycomb" look to them, but it doesn't sound good. 
Logged

Offline Caminokid

  • Enthusiast
  • **
  • Posts: 108
Re: Honda 360 question
« Reply #2 on: August 05, 2009, 12:49:34 PM »
No Honda that I know of has oil with the points. Find the leak and fix that first. Then go for the rest.
Logged
God created man...Winchester and a baseball bat made then equal. Evel Knievel

Offline 333

  • Time for change
  • Really Old Timer ...
  • *******
  • Posts: 7,557
  • Mail List Member #162 - Call me Stan
Re: Honda 360 question
« Reply #3 on: August 05, 2009, 01:35:08 PM »
Probably just an oil seal behind the advancer.  Easy fix.
Logged
Go metric, every inch of the way!

CB350F0  "Scrouching Tiger"
CT70K0    "Sneezing Poodle"

www.alexandriaseaport.org

Rampage1967

  • Guest
Re: Honda 360 question
« Reply #4 on: August 05, 2009, 09:30:09 PM »
There is an oil seal & two rubber plugs behind that cover.
Check cam bore for play, if it is ok, then replace all three rubber parts.
No use changing the seal without changing the 30 year old plugs too.
Logged

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: Honda 360 question
« Reply #5 on: August 06, 2009, 12:53:40 PM »
if its only seal you got lucky.
 Usually though, seal leaks because cam bearings are worn.
 Need to pull cam cover and cam, to check

PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline Green550F

  • Hot Shot
  • ***
  • Posts: 340
  • Nothing is as cool as that which you made.
Re: Honda 360 question
« Reply #6 on: August 07, 2009, 07:21:45 PM »
Is he really in the points? Sounds like he pulled the alternator cover looking for points! ???
Logged
93 Kawasaki Voyager XII
70 Honda CL350 Cafe

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Honda 360 question
« Reply #7 on: August 07, 2009, 10:05:42 PM »
Quote from: Green550F on August 07, 2009, 07:21:45 PM
Is he really in the points? Sounds like he pulled the alternator cover looking for points! ???
I think that is what he did too.  I can not get to see it until Sunday.  Will check it out then.  Thanks
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline Caminokid

  • Enthusiast
  • **
  • Posts: 108
Re: Honda 360 question
« Reply #8 on: August 08, 2009, 03:52:19 PM »
I have coils for that bike. I just got a 360 with a locked up motor.
Logged
God created man...Winchester and a baseball bat made then equal. Evel Knievel
Pages: [1]   Go Up
« previous next »