Author Topic: 1000 CC Big Bore Kit - Christmas Comes Early! (Read 5216 times)

Bill/BentON Racing · « **on:** August 09, 2009, 11:57:44 AM »

What a beautiful sight - does it get any better then this!

Tapered wrist pins - 44.85 grams

Right 1000 CC APE Piston - Left 836 CC Wiseco

Wiseco 836 178.06 - APE 1000 CC - 204.87 grams

NOW IF I ONLY HAD A SAM GREEN 2009 TOUR TEESHIRT... SAM WHERE'S THE HIGH REZ PIC AT?

We are waiting on YOU! Is this what happens at the RACETRACK!?

bwaller · « **Reply #1 on:** August 09, 2009, 12:27:02 PM »

Well Merry Christmas Bill, lookin good.

Bill/BentON Racing · « **Reply #2 on:** August 09, 2009, 12:50:38 PM »

Brent,Life is Good,Thanks and thank all yall on forum,where was this @ in the 70s? Sure would have been helpful!Now gotta save up for MR head job,carbs? Got so much to do,Lot a fun and midnight oil ,but a 1000cc big bore CB750 Honda,a dream come true!

,Bill

michrobi · « **Reply #3 on:** August 09, 2009, 01:20:52 PM »

Oh baby! Pay no attention to my Woodrow Wilson.

What rods did you decide on Bill? I'm leaning heavily towards the Carrillo billet super sweets.

-Mike

Bill/BentON Racing · « **Reply #4 on:** August 09, 2009, 04:09:24 PM »

Boss man I think Carillo it is Jay,Jeff someone take my money,Oh i gotta find some first.Rods more than big bore kit!!,But you better put something under 1000cc or you'll be picking up the pieces!!Wow I'm PUMPED!!!!,Bill

andy750 · « **Reply #5 on:** August 09, 2009, 04:33:46 PM »

Nice one Bill and Ill be watching your thread to share in your excitement!

good luck
Andy

Retro Rocket · « **Reply #6 on:** August 09, 2009, 04:44:57 PM »

Got mine last week, didn't get the sleeves though as i will use one of Mike Rieck's billet "big blocks".....

Now waiting on the 970 kit and sleeves for my F1.....Lots of big bore goodness.....

Mick

Bill/BentON Racing · « **Reply #7 on:** August 09, 2009, 06:51:00 PM »

Thanks Andy,i will be doing a thread,Mick I couldn't wait,I see a MR cylinder in the future,I hope to get him to do my head.Gotta save for rods now,also got to decide on crank work,etc.but got some goodies I have been saving,should be fun!

,Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #8 on:** August 09, 2009, 10:36:35 PM »

Bill,

FYI - check pricing on Carrillos. It's gotten cheaper and more competitive.

All of us are at different stages. I have 2 MRieck heads, 1 with 34mm intakes and the other with 33.5mm intakes. 1 set of 900 cylinders just done and the 1000 kit and cylinders still needing to be done. 1 APE crank with Carrillos. 1 set of Crower rods that need a crank done. I have most of the big expenses done except for 2 sets of CR31's. What the hell, it's only a thousand bucks here a thousand bucks there

Jerry

Big Jay · « **Reply #9 on:** August 09, 2009, 11:58:19 PM »

Carrillos are on the shelf at $967.50

Bill/BentON Racing · « **Reply #10 on:** August 10, 2009, 09:33:21 AM »

Jerry,you way ahead,Go Man!,I need Carillos,head, cylinder, and crank work,so APE did your crank and rods? I think its a $1000.00 here there and everywhere ,Ok tho, can't take it with,No U-hauls allowed,What a blast to fire one of these up?Also need carbs 31mm Keihins?Rods in Sept.? I hope so.Jay,thanks,we'll be in touch.Bill

HB-1fan · « **Reply #11 on:** August 10, 2009, 01:27:12 PM »

Sure sounds exciting!!
What do you guys think about the early(around 86') gixxer carbs??Always heard they were great carbs and a cheap alternative. I know they were 34mm or something and worked well on 750 to 1000cc dohc motors. I would guess it would take a 1000cc to keep them happy. If POP's was selling them with his race kits, surely it's do-able!

HB

HB-1fan · « **Reply #12 on:** August 10, 2009, 01:29:19 PM »

I mean old school 34mm he was selling!

HB

Bill/BentON Racing · « **Reply #13 on:** August 10, 2009, 01:44:12 PM »

Hadn't thought about those......,manifolds be the biggest problem ? Bill

Retro Rocket · « **Reply #14 on:** August 10, 2009, 04:34:20 PM »

Quote

Also need carbs 31mm Keihins?

I have read that the "31's" are more top end orientated for racing so i will be using 29's.

I wonder how hard those gixxer carbs would be to make fit?

Mick

MRieck · « **Reply #15 on:** August 10, 2009, 04:52:37 PM »

77/78 K -Auto manifolds would probably work.

Sam Green Racing · « **Reply #16 on:** August 10, 2009, 05:21:15 PM »

I got a PM from a guy that is helping me with my auto street ET bracket bike.
He has aquired a set of 34mm CVs which he has moded and rejetted to suite the auto.
He is suplying the rubbers (new) off ebay but I don't know what they are off but he has used them several times. I'll let you know when I find out.
Like Mike says, the late model K and F rubbers suite the big CR carbs, they are what I fitted on the CR I built.

Sam.

Retro Rocket · « **Reply #17 on:** August 11, 2009, 05:26:53 AM »

Woohoo, my 970 kit just arrived, so i'll have a 1000cc K2 and a 970cc F1.....

You see thats what happens when you are restoring ONE bike, you end up building at least 2 maybe 3 bikes.......All i need is another engine and i'll have enough bits for three.....Shame isn't it....

Mick

HB-1fan · « **Reply #18 on:** August 11, 2009, 05:50:37 AM »

A set on ebay now!

http://cgi.ebay.com/ebaymotors/SUZUKI-GSX-R750-GSXR-750-MIKUNI-CARBS_W0QQitemZ110421396772QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item19b5a0cd24&_trksid=p4506.c0.m245

HB

Jim F · « **Reply #19 on:** August 11, 2009, 06:15:50 AM »

Hey Bill
I just PMed you but did you work up at Roswell Honda many years ago?

Jim

Bill/BentON Racing · « **Reply #20 on:** August 12, 2009, 11:39:29 AM »

Jim,Whats up?It's me,Jim French right?Been a long time,now I can give you credit for the cover,Chills?,Cool.I'm in MBSC vacation,I'll PM you later.We gotta do lunch!!! and catch up.Wow.This is neat!,Bill

Sam Green Racing · « **Reply #21 on:** August 12, 2009, 12:07:10 PM »

Big Jimmy gets it on with little Willie

It's nice when old mates meet after many years, lots to talk about and reminisce.

Sam.

Jim F · « **Reply #22 on:** August 12, 2009, 01:29:41 PM »

Very Cool indeed.

Bill got me the cases you see in the little picture to the left to get my CB going

and yes its still going

little Willie..................cute Sam.

Bill/BentON Racing · « **Reply #23 on:** August 13, 2009, 11:10:20 AM »

Sam,little Willie B here,was name of Atlanta's resident gorilla @ the Zoo,seems about right,Damn Jim ,this is cool.Sam we gonna have get together @ some place when you hit town,still need pic,gonna send you logo proof next week.Take care and no Red lights!!,Bill

Jim F · « **Reply #24 on:** August 13, 2009, 12:34:42 PM »

Hey Bill
Call me when you can at 770-367-7320
This is my company web site
www.jmfmicroweld.com and that has all of my info too.

Jim

News:

Author Topic: 1000 CC Big Bore Kit - Christmas Comes Early! (Read 5216 times)