Author Topic: cutting out ???  (Read 733 times)

0 Members and 1 Guest are viewing this topic.

chopper550

  • Guest
cutting out ???
« on: September 16, 2009, 12:29:52 AM »
Hey guys...... after sorting out the chop i seem to have a problem ......... when i open up the bike to take over or just open her up she cuts out and then goes again very strainge any ideas... iv never had this problem before........ as soon as you ease off she fires up again other than that she runs like a dream... its defo not a machanical problem....... im guna try a new set of plugs see if that sorts it
loz
« Last Edit: September 16, 2009, 12:36:40 AM by chopper550 »

Mediconi

  • Guest
Re: cutting out ???
« Reply #1 on: September 16, 2009, 12:44:30 AM »
Mine does that sometimes... but I'm thinking that mine might have something to do with having way too long of a clutch cable and not fully engaging or disengaging the clutch

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: cutting out ???
« Reply #2 on: September 16, 2009, 05:46:21 AM »
What bike is this?

Are you running pods?  My 750 with pods won't take a sudden whack on the throttle and reacts like you describe, but if I roll on the throttle a bit more gradually it's ok.  I've always attributed this to the lack of a stock airbox.

The models with accelerator pumps are more tolerant of this sort of thing from what I hear so that may also be a factor.

mystic_1
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

chopper550

  • Guest
Re: cutting out ???
« Reply #3 on: September 16, 2009, 06:44:29 AM »
Thanks guys .... its a cb550 drag pipes an pods...... iv had her on the road for 18months never a problem till now i re-jetted her just fine....... its been a gradual thing it has electronic ignition as well...... i origanaly thought the clutch was slipping but i know its no now..... i know its a case of illimination...... i will try the new plugs and check all the electrics and let you know......