Topic: No fluild from rear caliper when bleeding

[lowmileage]

My   other bike is a 2004 Harley Superglide   ( ).  I had a low brake lever during yesterdays ride so I figured it would be a good time to finally bleed the brakes.   I was going to do just a gravity bleed and started in the back. Well  I was waiting for fluid to come out of the tube attached to the bleeder and didn't want to wait any longer so I went for my Mitivac sucker. Got a bunch of bubbles which I assumed were from the threads of the bleeder sucking air but figured I'd eventially get a good fluid flow. Eventially the bubbles stopped but no fluid ever came out. I even took the bleeder completly off and still no fluid . Other than a line being plugged up, I'm sorta dumbfounded.  Need some help on a   fix.  

[Green550F]

so does the rear wheel stop spinning when the pedal is pressed? if so, I think I'd remove the bleeder and check to see if it is plugged.

if not, it sounds more like a master cyl problem...

[lowmileage]

Problem fixed - thanks.