« previous next »
Pages: [1] 2   Go Down

Author Topic: I have Parts.... I dont need them.  (Read 3198 times)

0 Members and 1 Guest are viewing this topic.

6 fingered man

  • Guest
I have Parts.... I dont need them.
« on: September 10, 2009, 09:39:31 AM »
My cousin disassembled a few 70's Hondas years back. He is cleaning out his old shop to rent and told me i am welcome to what parts i want. There is nothing great but i have a large pile of exhaust pipes. some disassembled twin motors. most of a 750, a 400 that is somewhat complete that i might look at doing something with. But basically there's just  LOTS of stock old parts. from gearing and valves to wheels and forks.  If any one lives in MA or NH and needs something i can take a look and see if I have it when i go down to look at all this and decide what i want. I don't want money just looking to help. Please don't ask for stuff you don't need as i do a lot of work on bikes and never know what i might want in the future. Just though id put it out there.
Logged

Offline 750

  • Enthusiast
  • **
  • Posts: 164
Re: I have Parts.... I dont need them.
« Reply #1 on: September 10, 2009, 09:50:16 AM »
Hey Sir
I am looking for a complete set of unmolested 1978 Honda CB750 K original 4 into 4 exhaust pipes for a restoration.  I do live in MN but I'd be more than willing to compensate you for your time and shipping to get them to me. You can call me, I will PM you my number, or PM Me or reply to this forum.  
Thanks  
Logged

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #2 on: September 10, 2009, 09:56:10 AM »
I have a LARGE collection of pipes. i can send you a picture. if what you need is there you can have them for what it costs to ship them... I hope to go there today or tomorrow. Hope i can help!   :)
Logged

Offline scartail

  • Hot Shot
  • ***
  • Posts: 286
Re: I have Parts.... I dont need them.
« Reply #3 on: September 10, 2009, 10:22:47 AM »
Do you have any Hawk GT parts?? ;)
Logged
'89 Hawk GT, newly acquired, daily beater...
'76 CB550, was my daily beater... my cafe project...
'72 Yamaha R5, newly acquired project... donated to my buddy...
'67 Suzuki T20, still working on her too... Currently in pieces...

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #4 on: September 10, 2009, 10:32:03 AM »
Quote from: scartail on September 10, 2009, 10:22:47 AM
Do you have any Hawk GT parts?? ;)

Who are you.... And who sent you?   :-\
Logged

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #5 on: September 10, 2009, 11:58:58 AM »
I have had a lot of people ask for pipes, and some other stuff. i think  its best i pick it all up, document whats there and i will give you guys what anything i have that you need first come/serve style.... Will post parts/pics soon.
Logged

Offline Slayer

  • Hot Shot
  • ***
  • Posts: 454
  • What can I say that hasn't been said before
Re: I have Parts.... I dont need them.
« Reply #6 on: September 10, 2009, 12:38:59 PM »
Quote from: 6 fingered man on September 10, 2009, 10:32:03 AM
Quote from: scartail on September 10, 2009, 10:22:47 AM
Do you have any Hawk GT parts?? ;)

Who are you.... And who sent you?   :-\

Six Fingered Man! Hello. My name is Inigo Montoya. You killed my father. Prepare to die.
Logged

Offline vanaman

  • Full Member
  • *
  • Posts: 47
Re: I have Parts.... I dont need them.
« Reply #7 on: September 10, 2009, 02:21:24 PM »
ive got a short list of items i need.  there wouldnt happen to be any 78 750f parts in there would there?
i need some side cover,muffler, seat latch and a right hand lever.

steve
« Last Edit: September 10, 2009, 09:47:40 PM by vanaman »
Logged
78 cb750f
97 VW Jetta GLX
98 Cabrio 1.8t

EverettShadowbrook

  • Guest
Re: I have Parts.... I dont need them.
« Reply #8 on: September 10, 2009, 03:06:34 PM »
PIPES! Whatcha Got? Lots of us seem to be looking. Anything with HM341 stamped on them?
Logged

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,348
Re: I have Parts.... I dont need them.
« Reply #9 on: September 10, 2009, 04:50:34 PM »
I'm not far away and I have a 750 K3, if you have any early pipes to find a home for please keep me in mind.
Logged

drown777

  • Guest
Re: I have Parts.... I dont need them.
« Reply #10 on: September 10, 2009, 05:02:46 PM »
I have a 1977 CB750 super sport. I need a muffler. I just discovered mine is rusted on the bottom and there is a large hole. Have anything with a #410 on it? I'll gladly pay to get it out to me in chicago  ;DAlso, would you have a rear master cylinder in working condition? Any info would help
Logged

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: I have Parts.... I dont need them.
« Reply #11 on: September 10, 2009, 05:12:05 PM »
Hey I am in Boston MA and looking for a Honda CB750K2 ignition switch - has a round connector to connect to the harness.

Much appreciated
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline jeepster

  • Hot Shot
  • ***
  • Posts: 292
Re: I have Parts.... I dont need them.
« Reply #12 on: September 10, 2009, 05:17:00 PM »
I'm looking for a rubber "grab strap" (not really sure what the hell it's called...the one on the seat so your passenger can fly off and not drag you with them.) and also a rubber clutch lever cover... For a CB650 Nighthawk, but I am going to be optimistic and say that any old 650 or 750 bits would work.
Logged
"An ounce of prevention is worth more if you break it up into nickel bags."

Offline donny

  • Hot Shot
  • ***
  • Posts: 305
Re: I have Parts.... I dont need them.
« Reply #13 on: September 10, 2009, 06:31:19 PM »
pipes..yes..pipes..I could use pipes

4 into 1.
or
4 into 2
thanks,
Logged
2007 Husqvarna self propelled lawn mower    1976F    1971K    1974K      1990 FXRS-SP

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: I have Parts.... I dont need them.
« Reply #14 on: September 10, 2009, 06:37:31 PM »
I could use at least one pipe or a set for a 78 750K, if they are in good shape I will drive up and get them.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #15 on: September 10, 2009, 07:06:00 PM »
Quote from: andy750 on September 10, 2009, 05:12:05 PM
Hey I am in Boston MA and looking for a Honda CB750K2 ignition switch - has a round connector to connect to the harness.

Much appreciated
Andy
Will a 74 ignition work for you? I have that. again yours if you want it. Feel free to call me six,one,seven-seven,seven,seven-two thousand seven. I'm in Boston all the time.
« Last Edit: September 10, 2009, 07:09:25 PM by 6 fingered man »
Logged

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #16 on: September 10, 2009, 07:11:19 PM »
Quote from: jeepster on September 10, 2009, 05:17:00 PM
I'm looking for a rubber "grab strap" (not really sure what the hell it's called...the one on the seat so your passenger can fly off and not drag you with them.) and also a rubber clutch lever cover... For a CB650 Nighthawk, but I am going to be optimistic and say that any old 650 or 750 bits would work.



The grab handle i have of my cafe you are welcome to it, let me know. i'll have to look for the rest.... 6one7 triple 7 two thousand 7
Logged

Offline honda750k

  • Enthusiast
  • **
  • Posts: 173
Re: I have Parts.... I dont need them.
« Reply #17 on: September 10, 2009, 07:12:26 PM »
I'm in need of an ignition switch for a 77/78.  maybe some other stuff too.  Specifically a fuse panel side cover, and some variety of brake caliper with a non stuck bleeder bolt.
I shot you a PM earlier I think.
Logged
These bikes dont die, they hibernate until the right person wakes them up again.

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: I have Parts.... I dont need them.
« Reply #18 on: September 10, 2009, 07:22:21 PM »
Quote from: 6 fingered man on September 10, 2009, 07:06:00 PM
Quote from: andy750 on September 10, 2009, 05:12:05 PM
Hey I am in Boston MA and looking for a Honda CB750K2 ignition switch - has a round connector to connect to the harness.

Much appreciated
Andy
Will a 74 ignition work for you? I have that. again yours if you want it. Feel free to call me six,one,seven-seven,seven,seven-two thousand seven. I'm in Boston all the time.

Hey thanks but a K4 switch has a square plug and I need a round plug. Thanks anyway. If you are in Boston let me know as we are always meeting for SOHC beer nights around the city.

cheers
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,858
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: I have Parts.... I dont need them.
« Reply #19 on: September 10, 2009, 08:24:09 PM »
Hi, I'm Hondaman...

I need at least one CB750 pipe, an HM341 with the rubber bumpers on the bottom side (this is for cylinder #2).

I could also use a whole set of 4 of the HM341 pipes for CB750 besides that one (I know I'm after the guys above, though...).
And a set of carburetors.
And some fork ears for the headlight, don't care if they are chrome or painted.
Do you have any handlebar switches for the right side of CB750? (Or, perhaps the whole handlebar assemblies with switches?).
I could use a pair of nice gauges (speedo-tach).
Do you have any side covers that say "750 Four" on them? I could use 2 pair, if you do...even if they don't have the logos...

And, Santa, while you're at it, world peace and a real job with benefits like health insurance and a 401K with matching contributions and Christmas bonuses, and...  ;D


Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: I have Parts.... I dont need them.
« Reply #20 on: September 10, 2009, 09:13:05 PM »
Well I ain't Santa Claus but HondaMan if YOU need a set of carbs PM me,be glad to help you out(maybe you'll finish your book)seriously have enough won't miss one set.Bill
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline honda750k

  • Enthusiast
  • **
  • Posts: 173
Re: I have Parts.... I dont need them.
« Reply #21 on: September 11, 2009, 11:05:21 AM »
Add my name for a 4:1 header i you've got an OEM one somewhere for a 750K. doesnt have to be pretty, just has to be usable and not interfere with my rear brake pedal.
Logged
These bikes dont die, they hibernate until the right person wakes them up again.

6 fingered man

  • Guest
Re: I have Parts.... I dont need them.
« Reply #22 on: September 11, 2009, 02:55:09 PM »
I have a few sets of carbs in various stages of completeness, but it sounds like belcow has you covered there. Going to pick up the rest of the parts tonight..... There is no wat i have enough pipes to cover you all but first come.....   ill pm you guys who asked with what i might have.
Logged

Offline Otto

  • Hot Shot
  • ***
  • Posts: 269
Re: I have Parts.... I dont need them.
« Reply #23 on: September 11, 2009, 05:53:14 PM »
This is a long shot , but, how about a 4-4 set of pipes with HM300 on them?
Any Valley Geen Metallic side covers, fork ears, tank, for a 71-750K1.
Thanks!

Bob
Logged
Otto

1971 HONDA CB750K1- Valley Green Metallic

2007 Triumph Bonneville - Silver/Black Carburetted

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: I have Parts.... I dont need them.
« Reply #24 on: September 11, 2009, 06:03:03 PM »
Quote from: Slayer on September 10, 2009, 12:38:59 PM
Quote from: 6 fingered man on September 10, 2009, 10:32:03 AM
Quote from: scartail on September 10, 2009, 10:22:47 AM
Do you have any Hawk GT parts?? ;)

Who are you.... And who sent you?   :-\

Six Fingered Man! Hello. My name is Inigo Montoya. You killed my father. Prepare to die.

Thanks for that one! Great movie!
Logged
Pages: [1] 2   Go Up
« previous next »