Author Topic: C-Hook Engine Removal & Rotisserie Engine Stand  (Read 62783 times)

0 Members and 1 Guest are viewing this topic.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,033
  • Sunny Central Florida
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #100 on: May 17, 2015, 05:47:20 pm »
How long did it take to pull?

I can start with a fully assembled, running motorcycle, and have the engine on the stand in about an hour and a half.
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
                                           http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
                                           http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                           http://oldmanhonda.com/MC/wiring750K1.html
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline RandyBMC

  • Enthusiast
  • **
  • Posts: 141
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #101 on: May 19, 2015, 04:44:32 pm »
Here's what I came up with.  It worked great.  Glad to have this forum!









Hope that helps!

Randy

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,033
  • Sunny Central Florida
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #102 on: May 19, 2015, 06:18:10 pm »
Nice!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
                                           http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
                                           http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                           http://oldmanhonda.com/MC/wiring750K1.html
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline oldskullero

  • Full Member
  • *
  • Posts: 91
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #103 on: April 12, 2016, 03:36:54 pm »
Nice one. Ill make sure to get this on my to do list

Sent from my SM-N9005 using Tapatalk


Offline kixbox

  • Enthusiast
  • **
  • Posts: 110
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #104 on: June 18, 2018, 08:31:56 am »
Thank you for an amazing how-to post. 

This is a shot in the dark but thought I'd ask anyway.  I am wondering if this was produced for forum members as I would not mind buying the hook? Will make life much easier than trying to find a shop to do it for me. 

Offline Sketchy Bikes

  • Full Member
  • *
  • Posts: 28
    • Sketchy Bikes Home Page
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #105 on: March 07, 2024, 05:44:23 pm »
If anyone is interested I finally used a C-hook and made a YouTube video of pulling my motor with it.  Worked pretty good!  Needed different straps for install.  I have some ideas to use a ratchet strap, or bike tie down strap. 

Let me know what you all think!

From Rusted and Busted to Custom!!!

Offline gearsoup

  • Full Member
  • *
  • Posts: 80
  • Maine, USA
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #106 on: March 10, 2024, 10:04:49 am »
If anyone is interested I finally used a C-hook...

Thanks, that finally sparked my motivation and I modeled one up in Fusion. If my Static Stress Simulation is correct, we should be able to use 38" thick steel and have (at most) about 1.5mm of deflection out at the end (this was also with a load of 350 pounds). I'll check in with some Simulation folks that I know and double check my values tomorrow, and then it's off to some plasma shops to get a price on 1, 5 and 10


Current Project: CB750-K6 (hoping for OEM look)
Future Project: CB750-K8  (likely go wild on this build)

Offline willbird

  • Hot Shot
  • ***
  • Posts: 563
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #107 on: March 15, 2024, 06:40:47 pm »
If anyone is interested I finally used a C-hook...

Thanks, that finally sparked my motivation and I modeled one up in Fusion. If my Static Stress Simulation is correct, we should be able to use 38" thick steel and have (at most) about 1.5mm of deflection out at the end (this was also with a load of 350 pounds). I'll check in with some Simulation folks that I know and double check my values tomorrow, and then it's off to some plasma shops to get a price on 1, 5 and 10

I scrounged up some 1.5" square tubing to make one from. Making the design so that it nests will save money for sure. Unless the shop is able to cut them out of material that would just be scrap anyway.

Offline Sketchy Bikes

  • Full Member
  • *
  • Posts: 28
    • Sketchy Bikes Home Page
Re: C-Hook Engine Removal & Rotisserie Engine Stand
« Reply #108 on: March 16, 2024, 10:37:43 am »
If anyone is interested I finally used a C-hook...

Thanks, that finally sparked my motivation and I modeled one up in Fusion. If my Static Stress Simulation is correct, we should be able to use 38" thick steel and have (at most) about 1.5mm of deflection out at the end (this was also with a load of 350 pounds). I'll check in with some Simulation folks that I know and double check my values tomorrow, and then it's off to some plasma shops to get a price on 1, 5 and 10

Cool glad I could inspire ya!!   My static load test was...  "I hope this holds!!".  Lol!  Worked good. 
From Rusted and Busted to Custom!!!