Author Topic: Dyna Beads thread locked up Now lets all fight over motor oil  (Read 15602 times)

0 Members and 3 Guests are viewing this topic.

Offline 1974CB750rider

  • Hot Shot
  • ***
  • Posts: 310
  • 1974 CB750K4 46000 miles
Dyna Beads thread locked up Now lets all fight over motor oil
« on: September 17, 2009, 01:02:23 PM »
I'll go first, Castrol is far superior to any other oil you can run in a SOHC engine.
People with closed minds cannot learn new things.

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #1 on: September 17, 2009, 01:04:41 PM »
Nah.  I'm gonna go mow the lawn.

Offline Damfino

  • Sneaky, Evil, Magnificent Bastard of a
  • Really Old Timer ...
  • *******
  • Posts: 5,216
  • Look at the grouse! NYUK,NYUK,NYUK!
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #2 on: September 17, 2009, 01:08:26 PM »
Nah.  I'm gonna go mow the lawn.

Ditto. Except I just finished mowing mine.... :P
Your Message Here!
You can still call me 'Schmitty'

1976 CB 750
2014 CB 1100DLX
2015 Harley Davidson Freewheeler



You know, a long time ago being crazy meant something. Nowadays everybody's crazy.
Charles Manson

You've got to watch your back in the SSDB, this is where the clever guys get bored with bike talk and make poo jokes.
I like my women a little big. Natural. Now, they shave this and wax that. It's not right. I love natural women. Big women. This trend in women has to go. Bulomia, anorexia. That's just wrong. You know what will cure that? My special sticky buns. One lick of my sticky buns and your appetite will come right back. ~ RIP Mr. Borgnine  01/24/1917 - 07/08/2012  :'(

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #3 on: September 17, 2009, 01:14:51 PM »
The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)
No.


Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #4 on: September 17, 2009, 01:34:25 PM »
I don't care who you think you are. Or what you think you are referring to.

That was a blatant unprovoked attack in an unrelated thread. You, sir, are an ass.

And to think I agreed with you in the other thread about Charlie. I feel so dirty. :D

The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)

The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.

So even with all your lying insults and whining, I converted your idiot ass.

Congratulations.  ;D


)ps don't complain with how many times you called me insane)  ;)


pss I hope you try them for the silky smooth ride and have fun biking days, and I do mean that.
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline Damfino

  • Sneaky, Evil, Magnificent Bastard of a
  • Really Old Timer ...
  • *******
  • Posts: 5,216
  • Look at the grouse! NYUK,NYUK,NYUK!
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #5 on: September 17, 2009, 01:34:49 PM »
The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)

The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.

So even with all your lying insults and whining, I converted your idiot ass.

Congratulations.  ;D


)ps don't complain with how many times you called me insane)  ;)

There is a definite difference between being a contributing member here and hanging around looking to start flame wars. I personally hope you get bored with us soon and move on to troll someone else's board.
Your Message Here!
You can still call me 'Schmitty'

1976 CB 750
2014 CB 1100DLX
2015 Harley Davidson Freewheeler



You know, a long time ago being crazy meant something. Nowadays everybody's crazy.
Charles Manson

You've got to watch your back in the SSDB, this is where the clever guys get bored with bike talk and make poo jokes.
I like my women a little big. Natural. Now, they shave this and wax that. It's not right. I love natural women. Big women. This trend in women has to go. Bulomia, anorexia. That's just wrong. You know what will cure that? My special sticky buns. One lick of my sticky buns and your appetite will come right back. ~ RIP Mr. Borgnine  01/24/1917 - 07/08/2012  :'(

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #6 on: September 17, 2009, 01:35:37 PM »
The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)

The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.

So even with all your lying insults and whining, I converted your idiot ass.

Congratulations.  ;D

The annoyance you bring is beginning to overshadow the entertainment you bring.
In any case, I AM trying to figure out if they work, and if they do, why. However, not much of anything you said has anything to do with it. At all.
If, however, you need to make crap up to pat yourself on the back because no one else will, I don't mind being the vehicle for your masturbatory, delusional self aggrandizement. So yes, thanks to you, the world is a better place, and you've saved the world from certain destruction! We should write a story about it. Be shelved right next to L Ron Hubbards books, I reckon :)

In any case, I think the dynabeads thread was still good for some excellent thinking excercises, sans 20 pictures of poop, of course.

/edit:

Rotella diesel engine made my clutch slip :)
No.


Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #7 on: September 17, 2009, 01:36:01 PM »
I use a 20W car oil in the winter.
1979 CB650, 25K miles, recently refurbished

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #8 on: September 17, 2009, 01:37:22 PM »
I use a 20W car oil in the winter.

 :D :D :D :D
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #9 on: September 17, 2009, 01:37:38 PM »
The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)

The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.

So even with all your lying insults and whining, I converted your idiot ass.

Congratulations.  ;D

The annoyance you bring is beginning to overshadow the entertainment you bring.
In any case, I AM trying to figure out if they work, and if they do, why. However, not much of anything you said has anything to do with it. At all.
If, however, you need to make crap up to pat yourself on the back because no one else will, I don't mind being the vehicle for your masturbatory, delusional self aggrandizement. So yes, thanks to you, the world is a better place, and you've saved the world from certain destruction! We should write a story about it. Be shelved right next to L Ron Hubbards books, I reckon :)

In any case, I think the dynabeads thread was still good for some excellent thinking excercises, sans 20 pictures of poop, of course.





For kicks, you could check out my now locked eat crow thread.
1979 CB650, 25K miles, recently refurbished

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #10 on: September 17, 2009, 01:38:20 PM »
I use a 20W car oil in the winter.

 :D :D :D :D



I thought that would change the temp of the room.
1979 CB650, 25K miles, recently refurbished

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #11 on: September 17, 2009, 01:47:13 PM »
Back yard's done, taking a beer break.  Where we at?





Oh,  this same crap again... :P

Offline 1974CB750rider

  • Hot Shot
  • ***
  • Posts: 310
  • 1974 CB750K4 46000 miles
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #12 on: September 17, 2009, 01:56:50 PM »
Mowing the yard is more fun if you drink while you do it. If your on a rider strap the cooler on and go. If your push mowing get you one of those six pack hats that holds 6 beers and has the drinking tubes. Make mowing more interesting and your neighbors get a good laugh to.
People with closed minds cannot learn new things.

Offline Skonnie Boy

  • Cold cock
  • Hot Shot
  • ***
  • Posts: 689
  • Life is not like a box of chocolates.
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #13 on: September 17, 2009, 02:08:11 PM »
Doesn't matter what viscosity or brand of oil you use as long you remember to mix in a single drop of your blood during your next oilchange.  Then, you and your bike will be bonded forever as Blood Brothers.  It will then also never let you down or leave you stranded or hanging or whatnot.  It will always be there for you.

Hai.
"Yeah, I'm hip about time. But I just gotta go."

Offline Simpson

  • I ain't no
  • Expert
  • ****
  • Posts: 791
  • Aged to perfection
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #14 on: September 17, 2009, 02:10:00 PM »
The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.
So even with all your lying insults and whining, I converted your idiot ass.
Congratulations.  ;D
)ps don't complain with how many times you called me insane)  ;)
pss I hope you try them for the silky smooth ride and have fun biking days, and I do mean that.

Please leave this forum Troll.
1970 CB750 K0
1975 CL/CB 360 Mix

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #15 on: September 17, 2009, 02:13:38 PM »
Doesn't matter what viscosity or brand of oil you use as long you remember to mix in a single drop of your blood during your next oilchange.  Then, you and your bike will be bonded forever as Blood Brothers.  It will then also never let you down or leave you stranded or hanging or whatnot.  It will always be there for you.

Hai.



Does blood spilled on the outside of the engine count?
1979 CB650, 25K miles, recently refurbished

Offline 1974CB750rider

  • Hot Shot
  • ***
  • Posts: 310
  • 1974 CB750K4 46000 miles
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #16 on: September 17, 2009, 02:17:30 PM »
I might have actualley mixed a little blood in mine the other day, as I had a bleeding finger when I changed my oil and it one of small wounds that just won't stop bleeding. So maybe I'll be blessed with a loyal bike forever. But on a more serious note, is it better to run 20/50 in warmer temps and 10/40 in cooler?
People with closed minds cannot learn new things.

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #17 on: September 17, 2009, 02:20:16 PM »
I'd say so. My book calls for 10W40 year round, and 20W in temps from 32 to 60. 10W below 32*.
1979 CB650, 25K miles, recently refurbished

Offline 1974CB750rider

  • Hot Shot
  • ***
  • Posts: 310
  • 1974 CB750K4 46000 miles
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #18 on: September 17, 2009, 02:24:09 PM »
I've always ran just 10/40 but kinda wondered about the 20/50 because I've noticed in really hot weather when I change the oil the 10/40 looks mighty thin.
People with closed minds cannot learn new things.

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #19 on: September 17, 2009, 02:26:42 PM »
It breaks down fairly quickly. You will have more oil pressure and less flow with the thicker oil. Just saying.
1979 CB650, 25K miles, recently refurbished

Offline NitroHunter

  • Radical Street / Strip Turbo
  • Hot Shot
  • ***
  • Posts: 711
  • A man's motorcycle is a reflection of the man
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #20 on: September 17, 2009, 03:19:39 PM »
 
I'd say so. My book calls for 10W40 year round, and 20W in temps from 32 to 60. 10W below 32*.
10w below 32 degrees? :o
Who in their right mind is gonna be riding when the average temperature is below 32 degrees! ;D
Makes my fingers turn blue just thinking about it!
Robbie the NitroHunter                      Fuel Coupe Hired Gun                  NHRA T/F 640

DRAGBIKE USA XH/MB Recordholder: http://forums.sohc4.net/index.php?action=dlattach;topic=127179.0;attach=332735
DRAGBIKE USA XH/SS Recordholder: http://forums.sohc4.net/index.php?action=dlattach;topic=63940.0;attach=103300
Young mans glory days in the lanes: http://forums.sohc4.net/index.php?action=dlattach;topic=45685.0;attach=66341

Offline bistromath

  • Hot Shot
  • ***
  • Posts: 730
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #21 on: September 17, 2009, 03:27:31 PM »
Wasn't too much warmer than that up here. At the time, I was using 20W50, and that morning in Sequoia National Forest, I had to use my camp stove to warm up the oil pan enough to get the oil thin enough to get the starter to turn over. For a while, I thought I was going to be stranded there.

'75 CB550F

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #22 on: September 17, 2009, 03:49:09 PM »
10w below 32 degrees? :o
Who in their right mind is gonna be riding when the average temperature is below 32 degrees! ;D
Makes my fingers turn blue just thinking about it!

I do, but then I've never claimed to be in my right mind. ;D 

If you have the right gear and heated hand grips, cold is no roadblock.  So far the lowest temp I've ridden in was about -5F.  Luckily work is only about 5 miles away.  My nose almost froze off of my face. 

SiliconDoc

  • Guest
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #23 on: September 17, 2009, 04:16:24 PM »
The dynabeads thread had gotten back to mostly nice and amicable, but was completely $#!+ted up by a few for no real reason.
Expect this thread ot get closed soon, too. Open forum would probably be a better place for this :)

The dynabead thread has now turned to the liars and fools agreeing the dynabeads work, and you particularly, are pretending you'll figure out why, thanks to ME.

So even with all your lying insults and whining, I converted your idiot ass.

Congratulations.  ;D


)ps don't complain with how many times you called me insane)  ;)

There is a definite difference between being a contributing member here and hanging around looking to start flame wars. I personally hope you get bored with us soon and move on to troll someone else's board.

Stick to your own business.
Thanks.
« Last Edit: September 17, 2009, 04:19:10 PM by SiliconDoc »

SiliconDoc

  • Guest
Re: Dyna Beads thread locked up Now lets all fight over motor oil
« Reply #24 on: September 17, 2009, 04:18:11 PM »
I use gas soaked oil from #3 and #4 misfires, so my crankcase is sparkling clean.