Topic: Race and Performance parts for sale and wanted.

[Don R]

 I bought a henry abe 16x3" rear cb750F wheel. I'm having second thoughts about using it. If anyone is in need of one give a PM.
  My plan was to use a Harley drag tire on it.

[newday777]

Looking for ported head for SOHC, '76 motor go fast project.

Mike MRIECK is the guy
Or CycleX.

[seanbarney41]

I bought a henry abe 16x3" rear cb750F wheel. I'm having second thoughts about using it. If anyone is in need of one give a PM.
  My plan was to use a Harley drag tire on it.

do you have a front to go with it?

[Don R]

I bought a henry abe 16x3" rear cb750F wheel. I'm having second thoughts about using it. If anyone is in need of one give a PM.
  My plan was to use a Harley drag tire on it.

do you have a front to go with it?

 Nope, I was going to go with 754's idea of using a Suzuki 5 star front wheel. He said once they had the same axle size and rotor pattern. Too bad he isn't here to ask again. It seems like the center hole was a different size, I think he made a rotor spacer.

[Finnigan]

Got a set of CycleX cb750 SOHC super stock connecting rods that I'm not using.  Haven't taken them out of the bag, best offer takes it.  Shipping from SoCal.

[Don R]

 Lowered prices for here, these are $200 below the lowest Ebay price.  I have a set of Mikuni VM29 smoothbore carbs with the 1.5 slides for sale, which are good for either Kawasaki or Honda according to the sticky at the top of the other bikes section.  No missing parts or stripped threads. I just re-jetted them per Greg Cope's suggestions on APE's website.
  They are on my running Suzuki GS1100 but it needs more venturi, I ordered 36's.
  I also found a set of new (unobtanium) in the package carb rubbers to fit the Kawasaki/Suzuki spacing onto a cb750 new in the shrink wrap package. 
  I would like to get $800 for the carbs and air filters, or $975 with the cb750 intake rubbers if you want them. In the meantime, they will be running on my Suzuki.
  This is the only place they are listed now. All of the experts on marketplace made me decide to not sell there. If someone here wanted them, I'd still sell but otherwise, I'll keep them for another project.  I think they might make more sense than the Webers. 
  I have another set on my Rat Race 836 and they are great on that bike.

[Old Scrambler]

Lockhart Oil Cooler Kit offered on ebay.........Yes its mine........#226220428725.....$200 or best offer.....SOLD Going to Japan

[newday777]

Lockhart Oil Cooler Kit offered on ebay.........Yes its mine........#226220428725.....$200 or best offer.

Nothing

[Old Scrambler]

That's because someone clicked on the BUY it Now ..........

[Ricisan]

I just posted looking for a CB axel spacer.
Any help out there?

[abaye23]

I've got a bunch of EPM racing wheels from the early 80's, mostly still in the box/in plastic. My uncle was the sole importer/distributor for EPM and these are ones he didn't sell when he closed the business in 1985. There's a mix of magnesium and aluminum. A bunch of Kawasaki, Honda, Suzuki and Yamaha wheels. One or two Guzzi, Ducati and BMW. Feel free to reach out if interested in any/more details!

Looking for around $500 per wheel for aluminum and $600 per wheel for magnesium, plus shipping.
Open to bulk discounts etc.

Also have cush drives and sprockets and disc adapters.

[newday777]

Do you have a front and rear set for a 78 CB750 F3?

[abaye23]

I realized it'll be way easier for me to post a list of what I have! See attached image (hopefully readable)

[newday777]

Yes readable.
Bummer........

[seanbarney41]

I've got a bunch of EPM racing wheels from the early 80's, mostly still in the box/in plastic. My uncle was the sole importer/distributor for EPM and these are ones he didn't sell when he closed the business in 1985. There's a mix of magnesium and aluminum. A bunch of Kawasaki, Honda, Suzuki and Yamaha wheels. One or two Guzzi, Ducati and BMW. Feel free to reach out if interested in any/more details!

Looking for around $500 per wheel for aluminum and $600 per wheel for magnesium, plus shipping.
Open to bulk discounts etc.

Also have cush drives and sprockets and disc adapters.

pretty interested in these...I will try pming you

[Don R]

 I have a set of ape air filters for mikuni RS carburetors and others ape number 005-121 and a motion pro push pull throttle with cables also for the above carburetors. APE shipped them by mistake after I declined to wait for filters and did buy the throttle cables.
 Anyway, they think it was my fault and want me to pay shipping so if anyone needs them I'd sell for what I have in them $170 and eat the shipping in the lower 48.
 
  I can use the throttle on my drag bike.

[Dresda500]

Good day folks, Close Ratio Gears!!
 I have been working with Nova Racing in the UK for the past year to develope some close ratio gears for Honda CB250/350 K twin and the CB500-4. I have a batch of close ratio gears for both 1st and 5th gear available for both type engines.

1st gear is a 37t, down from 40t (uses same mating so, 17/37 now) and are drop in on all engines.

 For 5th gear, it is the same as previous Nova delivered, but no longer offered, 29t (29t/27t). This one is square dog design, so drop in for the 250/350 K. On the CB500, you must swap on the 2nd/3rd gear cluster from the CB350K, as the Cb500 is round dog...this is the only change and good used gears are availble for next to nothing on Ebay etc.

For a very limited time, I can drop ship from Nova in the UK direct to customers in other countries than Norway. After this, all gears will be at my shop and pricing will increase to cover shipping and import tax. From UK they are £210 each plus tax/shipping if applicable. Please take contact asap for purchase...as soon as the bulk are shipped to me in Norway, pricing will increase due to shipping costs.
These are not a stocking item at Nova and not available for purchase direct and likely a one time order from myself....only 10 gears of each type available

[Ricisan]

I have both disks from early CB 900. Stockton Ca