My conversion is giving me trouble. Im putting nice new 1976 CB360T Handle bar controls where my ratty old 1975 CB550 controls used to be, most of it works, just not 100%.
The oddest thing is functions seem to spring up the longer i leave it on (not running).
1/2 turn on the key = both low and high beam selection on the left hand control yields only neutral light on and oil light on.
whole turn key into ignition ready =
Low beam: lowbeam headlight. running lights on turn signals and alternate turn signals (if i select left turn the right one stays solid, vice versa), Brake light low power.
High Beam: Highbeam Headlight, no turnsignals at all, and brakelight BRIGHT as though im pressing iton neither setting does the brake light react to my pressing, nor the horn, no more neutral light and no electric start.
Are there some connections i need to jump or split? The 550 has a lot more electrical functions and wires than the 360 does.
what ever tips you guys might have would be great. Im just looking for on 'whole turn ignition mode' for the headlights to work, brake, turnsignals and electric start. Just got to figure out how to make that all happen.
THanks,
Pete