« previous next »
Pages: [1]   Go Down

Author Topic: CB 450 Lower tree made in Italy?  (Read 1795 times)

0 Members and 1 Guest are viewing this topic.

Offline cb550fcafe

  • Hot Shot
  • ***
  • Posts: 298
    • KDI Cycles
CB 450 Lower tree made in Italy?
« on: September 27, 2009, 12:36:28 PM »
My 1970 CB450 has forks I am not familiar with. The lower tree has made in Italy on it. There is some sort of friction type steering stabalizer with an adjusting nut at the top of the upper tree. I'll take pics is needed. Is this stock? Any good?

The name ARCES is on the lower tree near made in ITALY. Bike also has DID wheels, they can't be stock.
« Last Edit: September 27, 2009, 04:03:38 PM by cb550fcafe »
Logged

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: CB 450 Lower tree made in Italy?
« Reply #1 on: September 27, 2009, 04:17:19 PM »
I used to have a pair of CB450's (both '70's) with Ceriani road race forks.
Sold them both, I wonder if you don't have one of them?????
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: CB 450 Lower tree made in Italy?
« Reply #2 on: September 27, 2009, 04:19:06 PM »
Do you want to sell the forks,? give me first dibs,
 I should have a set pt stock 450 trees here, and some 550 legs & trees,
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline cb550fcafe

  • Hot Shot
  • ***
  • Posts: 298
    • KDI Cycles
Re: CB 450 Lower tree made in Italy?
« Reply #3 on: September 27, 2009, 05:41:45 PM »
The bike is a CL not CB, sorry for any confusion, I have too many bikes. I would guess its the same as CB anyway. So I took some pics. The word ARCES did not show in the pic, but its there. So should I keep these forks or sell them. My riding is only weekend cruising, I'm not carving it up.
« Last Edit: September 27, 2009, 05:45:44 PM by cb550fcafe »
Logged

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: CB 450 Lower tree made in Italy?
« Reply #4 on: September 27, 2009, 06:12:32 PM »
Yeah, those are vintage Cerianis.
They came with the clamps and stem and steering damper, were a bolt-up to the drum brake.
That old school friction damper is very effective, don't sniff at it......

Absolutely worthless now, I think you should send them to me - I'll be glad to pay shipping....... ;) ;) ;D ;D
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: CB 450 Lower tree made in Italy?
« Reply #5 on: September 27, 2009, 09:11:28 PM »
my suzuki titan has one of those friction dampers on it too.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894
Pages: [1]   Go Up
« previous next »