« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: Clubman or clip-on for Cafe Build  (Read 36757 times)

0 Members and 4 Guests are viewing this topic.

Offline The_Crippler

  • In regards to doing it wrong, I'm an
  • Expert
  • ****
  • Posts: 1,262
  • Work in progress.
Clubman or clip-on for Cafe Build
« on: October 09, 2009, 06:25:24 PM »
Hey all...wondering what the straight skinny is on clubman bars vs clip-ons for Cafes.  Most of what I've read hear, on dotheton.com and elsewhere says clip-ons.  Less painful, easier to install, etc...

However, most builds I've seen on here seem to have clubman bars.  What the verdict?

Logged

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: Clubman or clip-on for Cafe Build
« Reply #1 on: October 09, 2009, 06:59:43 PM »
If I didn't love the headlight ears as much as I do... clip-ons.
Logged

Offline Shenanigans

  • At making holes in walls, Im a
  • Master
  • *****
  • Posts: 1,560
  • Right turn?
Re: Clubman or clip-on for Cafe Build
« Reply #2 on: October 09, 2009, 07:06:07 PM »
Clip-ons are way more legit. But clubmans are cheap (and easy) and seem to have the magical property of turning a relatively stock bike into a caaahhhfaaay...  ::) ;D
Logged
   This pretty much sums it up.   76' CB592 cafe. 69 750 project, 03 CBR954, 75 750 super sport.

Offline The_Crippler

  • In regards to doing it wrong, I'm an
  • Expert
  • ****
  • Posts: 1,262
  • Work in progress.
Re: Clubman or clip-on for Cafe Build
« Reply #3 on: October 09, 2009, 07:09:53 PM »
Lol...really, Shenanigans...how do you really feel?
Logged

Offline Shenanigans

  • At making holes in walls, Im a
  • Master
  • *****
  • Posts: 1,560
  • Right turn?
Re: Clubman or clip-on for Cafe Build
« Reply #4 on: October 09, 2009, 07:21:54 PM »
I take no sides in this battle, I have a set a clubmans on my 550  ;D for now

Just to add fuel to the fire, The most confident feeling bars handling wise, that I have ever had was a set of euro bars.

Logged
   This pretty much sums it up.   76' CB592 cafe. 69 750 project, 03 CBR954, 75 750 super sport.

Offline Gorms

  • Barkeep! Give me a beer and a
  • Hot Shot
  • ***
  • Posts: 534
Re: Clubman or clip-on for Cafe Build
« Reply #5 on: October 09, 2009, 07:45:09 PM »
I like the look of clip ons.  Partsnmore has em for $45.
Logged

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: Clubman or clip-on for Cafe Build
« Reply #6 on: October 10, 2009, 04:32:43 AM »
Clubmans will have a slightly more aggressive feel as they will push you slightly further forward in your stance. They "Look" the pat a bit more. I put clip ons on my last cafe bike and will be running clip ons on the bike I am working on now.

It really becomes a personal, and comfort choice (not that either are truly comfortable).
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

Offline Shenanigans

  • At making holes in walls, Im a
  • Master
  • *****
  • Posts: 1,560
  • Right turn?
Re: Clubman or clip-on for Cafe Build
« Reply #7 on: October 11, 2009, 02:45:07 PM »
Quote from: gorms on October 09, 2009, 07:45:09 PM
I like the look of clip ons.  Partsnmore has em for $45.

Link? I could not find them on the site.


Never mind, found them. Bet they would sell more off their website if people could find them easier...


https://www.partsnmore.com/cat_index.php?model=cb750_sohc&category=controls
« Last Edit: October 11, 2009, 02:49:58 PM by Shenanigans »
Logged
   This pretty much sums it up.   76' CB592 cafe. 69 750 project, 03 CBR954, 75 750 super sport.

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: Clubman or clip-on for Cafe Build
« Reply #8 on: October 11, 2009, 02:49:41 PM »
cyclexchange has clip ons that mount under the fork tube top nuts. if i ever ran another clip on i'd likely go with those.
http://www.cyclexchange.net/index%20pics/barend3.JPG
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: Clubman or clip-on for Cafe Build
« Reply #9 on: October 11, 2009, 04:05:32 PM »
Quote from: bucky katt on October 11, 2009, 02:49:41 PM
cyclexchange has clip ons that mount under the fork tube top nuts. if i ever ran another clip on i'd likely go with those.
http://www.cyclexchange.net/index%20pics/barend3.JPG

Holy heck! Those are great! So you could keep the stock ears with these it looks like but whatever angle they're at is all you get? Maybe I'm not visualizing them mounted very well.
Logged

Offline The_Crippler

  • In regards to doing it wrong, I'm an
  • Expert
  • ****
  • Posts: 1,262
  • Work in progress.
Re: Clubman or clip-on for Cafe Build
« Reply #10 on: October 11, 2009, 04:31:52 PM »
Quote from: Iggy on October 11, 2009, 04:05:32 PM
Maybe I'm not visualizing them mounted very well.

Ha...I have trouble visualizing a lot of this stuff.  I'd really like it if more places had easy to find instructions on clubman/clip-on installation.
Logged

Offline nobody

  • Hot Shot
  • ***
  • Posts: 527
Re: Clubman or clip-on for Cafe Build
« Reply #11 on: October 12, 2009, 12:12:38 PM »
I've not had either on a bike yet so I can't say anything to comfort/ease of install but clip ons look the part much better than clubmans. Clip ons, some nice brakets and a clean top triple...?  :o

I'll be putting clip ons on my cafe build for sure.
Logged
74 cb750k

Quote from: KB02 on October 28, 2009, 02:58:26 PM
If life hands you lemons, make lemonade. If life hands you tomatoes, make tomato soup. If life hands you a box of hand grenades... well, now... THAT'S a message!!

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: Clubman or clip-on for Cafe Build
« Reply #12 on: October 12, 2009, 01:47:52 PM »
i've had both on my k4 750. clubmans let the control housings bang the tank, but i felt like the clip-ons were too far forward
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline Gorms

  • Barkeep! Give me a beer and a
  • Hot Shot
  • ***
  • Posts: 534
Re: Clubman or clip-on for Cafe Build
« Reply #13 on: October 12, 2009, 02:50:04 PM »
Quote from: Iggy on October 11, 2009, 04:05:32 PM
Quote from: bucky katt on October 11, 2009, 02:49:41 PM
cyclexchange has clip ons that mount under the fork tube top nuts. if i ever ran another clip on i'd likely go with those.
http://www.cyclexchange.net/index%20pics/barend3.JPG

Holy heck! Those are great! So you could keep the stock ears with these it looks like but whatever angle they're at is all you get? Maybe I'm not visualizing them mounted very well.

I think that bolt in there also functions as the top triple tree clamp bolt?
Logged

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Clubman or clip-on for Cafe Build
« Reply #14 on: October 12, 2009, 03:12:47 PM »
On my 750 i did drag bars, then clipons but they hit my tank so i went to clubmans, hated them went to a different set of clipons mounted above the triple tree. Hate the way the bike handles and i cant ride long distance like that. so now im back to drag bars. I will be putting my clipons on my 550 when i do the cafe to that one. Comfort or looks? you cant have both. My final opinion is Stock is comfy but clip ons look really good.
Logged

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: Clubman or clip-on for Cafe Build
« Reply #15 on: October 12, 2009, 04:26:45 PM »
Quote from: gorms on October 12, 2009, 02:50:04 PM
Quote from: Iggy on October 11, 2009, 04:05:32 PM
Quote from: bucky katt on October 11, 2009, 02:49:41 PM
cyclexchange has clip ons that mount under the fork tube top nuts. if i ever ran another clip on i'd likely go with those.
http://www.cyclexchange.net/index%20pics/barend3.JPG

Holy heck! Those are great! So you could keep the stock ears with these it looks like but whatever angle they're at is all you get? Maybe I'm not visualizing them mounted very well.

I think that bolt in there also functions as the top triple tree clamp bolt?


thats it! i've been trying to figure out how they would go on.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline Steve F

  • I have "some-timer's disease" because I'm an
  • Old Timer
  • ******
  • Posts: 2,929
  • "To Ride Is The Reason, The Destination The Excuse
Re: Clubman or clip-on for Cafe Build
« Reply #16 on: October 12, 2009, 05:35:52 PM »
Build your own if you don't like what the retail market has to offer  ;)
Logged

Offline ben.cb500

  • Enthusiast
  • **
  • Posts: 143
Re: Clubman or clip-on for Cafe Build
« Reply #17 on: October 12, 2009, 07:34:55 PM »
I would really appreciate it someone who has these CycleX clip on/overs could comment on how they work and post a photo! Dont make me be the test dummy....
Logged

Offline The_Crippler

  • In regards to doing it wrong, I'm an
  • Expert
  • ****
  • Posts: 1,262
  • Work in progress.
Re: Clubman or clip-on for Cafe Build
« Reply #18 on: October 13, 2009, 06:21:35 AM »
Quote from: ben.cb500 on October 12, 2009, 07:34:55 PM
I would really appreciate it someone who has these CycleX clip on/overs could comment on how they work and post a photo! Dont make me be the test dummy....

You'll be the test dummy, and you'll like it!   ;)

Quote from: Steve F on October 12, 2009, 05:35:52 PM
Build your own if you don't like what the retail market has to offer  ;)


Those look really nice.  I'm hoping to get a setup with barend mirrors on my.  I think some models of those look really slick.
Logged

Offline Beans

  • I play with grease every day.
  • Hot Shot
  • ***
  • Posts: 575
  • 1975 cb550f
    • bean's place.
Re: Clubman or clip-on for Cafe Build
« Reply #19 on: October 13, 2009, 06:36:52 AM »
I got clubmans on my bike and loved them till I went to our local bike night and saw a cb750 with clip on and well fell in love with them when I rode the bike.  I will be doing clip ons for sure when I rebuild my bike.
Logged
Keep it shinny side up.

Offline fishhead

  • Hot Shot
  • ***
  • Posts: 597
  • Why don't you go.....Well, you know the rest.....
Re: Clubman or clip-on for Cafe Build
« Reply #20 on: October 13, 2009, 06:40:37 AM »
Quote from: ben.cb500 on October 12, 2009, 07:34:55 PM
I would really appreciate it someone who has these CycleX clip on/overs could comment on how they work and post a photo! Dont make me be the test dummy....

 They look to be Dunstalls or Dunstall copies. I had a set of original Dunstalls on my CB 750, but they wouldnt transfer over to my GL front end. The Dunstalls had a weird angle to them, but worked fine. When I changed the front end over, I put on a set of adjustable Raask clubmans. After I put the Raask bars on, the Dunstalls were very uncomfortable in comparison. The "V' angle of the Dunstalls had were a lot sharper than the Raask bars have.

Duntall Clip ons
 and Raask Clubman

Logged
Quote from:  Vanna White




Photobucket slide show (Fishhead Big Brakes)
http://s111.photobucket.com/albums/n130/dgfischer/Fishhead%20Big%20BRakes/?albumview=slideshow

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: Clubman or clip-on for Cafe Build
« Reply #21 on: October 13, 2009, 07:49:28 AM »
Quote from: fishhead on October 13, 2009, 06:40:37 AM
Quote from: ben.cb500 on October 12, 2009, 07:34:55 PM
I would really appreciate it someone who has these CycleX clip on/overs could comment on how they work and post a photo! Dont make me be the test dummy....

 They look to be Dunstalls or Dunstall copies. I had a set of original Dunstalls on my CB 750, but they wouldnt transfer over to my GL front end. The Dunstalls had a weird angle to them, but worked fine. When I changed the front end over, I put on a set of adjustable Raask clubmans. After I put the Raask bars on, the Dunstalls were very uncomfortable in comparison. The "V' angle of the Dunstalls had were a lot sharper than the Raask bars have.

Duntall Clip ons
 and Raask Clubman



Whoa. That's a pretty steep angle. I think my wrists would start barking after an hour or so turned out like that.


The clubs I have on mine now are fine - I just wish they were about an inch higher with the same rake. About the same spot clip-ons mounted under the triple would put them I think.
« Last Edit: October 13, 2009, 07:54:20 AM by Iggy »
Logged

Offline ColinMc

  • Expert
  • ****
  • Posts: 1,006
  • There aint no pickle like a super pickle...
Re: Clubman or clip-on for Cafe Build
« Reply #22 on: October 13, 2009, 08:18:55 AM »
Quote from: fishhead on October 13, 2009, 06:40:37 AM
They look to be Dunstalls or Dunstall copies. I had a set of original Dunstalls on my CB 750, but they wouldnt transfer over to my GL front end. The Dunstalls had a weird angle to them, but worked fine. When I changed the front end over, I put on a set of adjustable Raask clubmans. After I put the Raask bars on, the Dunstalls were very uncomfortable in comparison. The "V' angle of the Dunstalls had were a lot sharper than the Raask bars have.

Duntall Clip ons
 and Raask Clubman

Good to hear about the GL front end...can I ask why they didn't work with the GL1000 front end? I'm going to be putting that front end on my project build and was going to use a cheap set of euro bars for now...planning to do clipons at some point...but now that might not be an option?
Logged
1976 CB750K - Cafe Project...taking forever
1984 Honda MB-5 - MB-8 conversion in process
2001 Ducati 748 - Built 996 motor sleeper

Offline fishhead

  • Hot Shot
  • ***
  • Posts: 597
  • Why don't you go.....Well, you know the rest.....
Re: Clubman or clip-on for Cafe Build
« Reply #23 on: October 13, 2009, 08:50:09 AM »
Quote from: ColinMc on October 13, 2009, 08:18:55 AM
Quote from: fishhead on October 13, 2009, 06:40:37 AM
They look to be Dunstalls or Dunstall copies. I had a set of original Dunstalls on my CB 750, but they wouldnt transfer over to my GL front end. The Dunstalls had a weird angle to them, but worked fine. When I changed the front end over, I put on a set of adjustable Raask clubmans. After I put the Raask bars on, the Dunstalls were very uncomfortable in comparison. The "V' angle of the Dunstalls had were a lot sharper than the Raask bars have.

Duntall Clip ons
 and Raask Clubman

Good to hear about the GL front end...can I ask why they didn't work with the GL1000 front end? I'm going to be putting that front end on my project build and was going to use a cheap set of euro bars for now...planning to do clipons at some point...but now that might not be an option?

 The CB top triple tree has 1 "squeeze" bolt per side(on the outside of the fork tubes) that clamps on to the fork tubes and this is where the Dunstalls mounted to. The GL has 1 allen "squeeze" bolt that is on the inside of the fork tubes (towards the steering stem). The GL top tree is also alot wider than the CB top tree.

 There's a better pic of a set of Dunstalls clip ons(or style) mounted on a bike in the "projects section". I cant find it, but its the cafe bike with a large sissy bar on it.
 The Dunstalls weren't too bad to ride with when I didn't have the Raask bars to compare them to.

 I like the adjustability of the Raask bars, They can be adjusted to suit almost any rider.
Logged
Quote from:  Vanna White




Photobucket slide show (Fishhead Big Brakes)
http://s111.photobucket.com/albums/n130/dgfischer/Fishhead%20Big%20BRakes/?albumview=slideshow

Offline The_Crippler

  • In regards to doing it wrong, I'm an
  • Expert
  • ****
  • Posts: 1,262
  • Work in progress.
Re: Clubman or clip-on for Cafe Build
« Reply #24 on: October 13, 2009, 09:02:13 AM »
Quote from: fishhead on October 13, 2009, 08:50:09 AM
There's a better pic of a set of Dunstalls clip ons(or style) mounted on a bike in the "projects section". I cant find it, but its the cafe bike with a large sissy bar on it.

This the one you're looking for?
Logged
Pages: [1] 2 3 4   Go Up
« previous next »