Topic: Nuetral stopper bolt size

[SKOL]

Does anyone have the bolt size for the tiny bolt that screw into the nuetral stopper at the bottom of a 1976 honda cb750. I can find much on the dimensions of this bolt and I need to replace it with a new bolt that will do its job. I have the nuetral stopper as well as the tab, just lost that little bolt. Any help would be appreciated.

[mystic_1]

92000-06016 = Bolt, Hex, 6x16

6mm hex bolt, 16mm long.  1.00 thread pitch.

mystic_1

[SKOL]

Thanks!

[SKOL]

Have I made a simple mistake in thinking this bolt would work? It is too wide, as well as looks to be far too long. Go easy on me if I made a dumb mistake.

[SKOL]

Another...

[SKOL]

And another...

[przjohn]

See your other post,

http://forums.sohc4.net/index.php/topic,60004.0.html

[flybox1]

Have I made a simple mistake in thinking this bolt would work? It is too wide, as well as looks to be far too long. Go easy on me if I made a dumb mistake.

Yes, the bolt you have purchased/pictured is the bolt which holds the retaining washer for the neutral switch.
It will not fit in the center of the neutral switch.
IIRC the neutral switch wire retaining screw it is M3/1.0