« previous next »
Pages: [1]   Go Down

Author Topic: I cut into the steering stem  (Read 1007 times)

0 Members and 1 Guest are viewing this topic.

Offline quidger

  • Enthusiast
  • **
  • Posts: 157
I cut into the steering stem
« on: October 14, 2009, 04:20:06 PM »
Couldn't get the bottom race off of the steering stem any other way so I got out the Dremel.

I cut through the race and into the stem before I was aware of what I had done.

Can I still use the steering stem or because I cut into it is it structurally defecient. Don't know if you can tell from the photo but the cut is 1/2" wide and in the middle of the cut. There is one micro area that went all the way through to the center of the stem.

That;s the bad news, the good news is that I got the darn race off.

Logged

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: I cut into the steering stem
« Reply #1 on: October 14, 2009, 04:23:38 PM »
i'd get it welded up if it were mine.............well i'd weld it myself lol
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline steam-powered man

  • Not the eggman, Not the walrus, I am the
  • Hot Shot
  • ***
  • Posts: 591
  • Where are you going? I was going to make Espresso
Re: I cut into the steering stem
« Reply #2 on: October 14, 2009, 04:40:45 PM »
gonna be pricey to properly prep/weld repair, then turn to the desired OD, but I would do that or maybe check the "parts for sale" section.  what is left of my brain cells think the bending (coupled with some torsion) loads are relatively high there.
bobp 
Logged
searching for a dr350se

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,344
Re: I cut into the steering stem
« Reply #3 on: October 14, 2009, 05:13:14 PM »
What bike's it from, maybe someone has one to offer?
Logged

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: I cut into the steering stem
« Reply #4 on: October 14, 2009, 05:14:11 PM »
What bike is it off of?
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: I cut into the steering stem
« Reply #5 on: October 14, 2009, 05:15:01 PM »
Sorry, I was typing that at the same time! I have a 550 & a 750 one. Depending on the year.
jim
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Offline quidger

  • Enthusiast
  • **
  • Posts: 157
Re: I cut into the steering stem
« Reply #6 on: October 14, 2009, 05:41:44 PM »
It's off of a 1975 CB550 K1.

If someone has one laying around I would be glad to buy. I think this is a high stress point and would rather be safe about this.

Thanks.
Logged

Offline JS550

  • the artist formerly known as
  • Hot Shot
  • ***
  • Posts: 621
  • IAFF local 1307
Re: I cut into the steering stem
« Reply #7 on: October 14, 2009, 05:53:24 PM »
I have on from a 76 550k. $20 + shipping, I'll send you the top & bottom. & if you want, I'll zip the bottom race off so its ready to go when you open it!
jim
Logged
If you're worried about how many calories are in beer, is losing weight really your biggest problem?

Offline quidger

  • Enthusiast
  • **
  • Posts: 157
Re: I cut into the steering stem
« Reply #8 on: October 14, 2009, 06:12:59 PM »
JS550 I will PM you about the steering stem.

Thanks
Logged
Pages: [1]   Go Up
« previous next »