« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: Project "Low Brow"  (Read 28243 times)

0 Members and 1 Guest are viewing this topic.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Project "Low Brow"
« on: October 25, 2009, 11:46:12 AM »
not really the name of the bike , more a theme to the build .... i'm thinking , tough looking ... i want people to see it and instantly know it get ridden alot ...  i'm thinking "bobber inspired cafe 2 seater"  

i won't be doing any animal print (really sick of all my friends askin that) .. most of the details are still up in the air
but here is whats gonna happen for sure

130x16" rear wheel  
white walls
hand made metal side covers
polished top tree
either satin, or low gloss black frame
some sort of dark blue satin tank and side covers  
drag bars
twin front brakes w/drilled rotors
vented rear hub
650 cam (if i can find one)
light porting (just smooth out the passages, not really remove any meat)

but main thing for this build is to take as many stock parts and turn them into something else
like the tail being a stock fender all cut up ... and so on

.... i like to let the pics do the talkin  soooo...



this is what happens when you don't prep good before you do a tank liner

this tank was REALLY dented up and had alot of bondo ....ALOT ... i was trying to cut off as much as i could, but in the end i had a lil hammering to do to get it straight

when using sheet metal , alway make templates first

make sure you mark them

don't forget to mark the pieces too

stop and check, stop and check, stop and check, stop and check, ... metal can be pretty unforgiving sometimes


on to the tail

support bracket removed

a chunk of stock rear fender welded on , and hammered to accept the seat

round bar i had layin around



a lil somthin like this 


more later .... see ya




« Last Edit: October 25, 2009, 11:50:59 AM by Spikeybike »
Logged

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #1 on: October 25, 2009, 12:00:36 PM »
   so i ran out of bondo long ago ... but i still have alot of spot putty... and tons of J.B. weld  sooooo

i'm filling the holes with JB weld and then finishing it all off with spot putty ... not the best way to do it ... but affective none the less  ;D ;D ;D

Logged

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Project "Low Brow"
« Reply #2 on: October 25, 2009, 12:30:31 PM »
awesome. I like the fender
Logged
everything I say is pure speculation and
I have no idea what I'm talking about  ._.

                                    Marla              .:71CB750:.CAFE

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,149
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Project "Low Brow"
« Reply #3 on: October 25, 2009, 02:04:20 PM »
Cool!   I like the theme! 

Tell me more about welding on the tank panels.  Is it tricky?
Logged
intrigued by the wail...seduced by the scream.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #4 on: October 25, 2009, 02:35:07 PM »
as far as welding sheet goes .. just take your time , stop and take a step back and look at it ALOT  (like, after every tack) 

mine was done with a MIG running flux core wire ... NEVER EVER EVER EVER again will i do this without a tig welder (lost my job, so i don't have access to one anymore)

it's totally do-able ,  just plan on it taking FOREVER
Logged

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #5 on: October 25, 2009, 06:58:22 PM »
my lil helper  ;D ;D



« Last Edit: October 26, 2009, 12:51:15 AM by Spikeybike »
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,899
  • Saver of unloved motorcycles.
Re: Project "Low Brow"
« Reply #6 on: October 25, 2009, 07:25:42 PM »
Having a lil helper is the best. I was one and my brother and I are working on cars and bikes together to this day. I still remember every trip to the junkyard and racetrack. My lil helpers are girls. One drives my dragster now and goes zero to 180 in 7.5 seconds. She's way better on the starting line than me and most people I know.
 The bike looks good keep it going.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #7 on: October 25, 2009, 07:30:37 PM »
Quote from: Don R on October 25, 2009, 07:25:42 PM
Having a lil helper is the best.

it really is man ... doesn't get any better then that for me

i just noticed we're even wearing the same outfit  ;D right down to the bandana in the back pocket
Logged

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #8 on: October 26, 2009, 12:54:21 AM »
 gauge bracket tabs? ...   what gauge bracket tabs?

polishings obviously not done


ok it's 3 i'm going to bed now
« Last Edit: October 26, 2009, 12:58:25 AM by Spikeybike »
Logged

Offline Toxic

  • Expert
  • ****
  • Posts: 1,200
Re: Project "Low Brow"
« Reply #9 on: October 26, 2009, 05:35:26 AM »
Wow. Love the rear fender.

I'm going to watch this build closely.

Great work
Logged

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,276
Re: Project "Low Brow"
« Reply #10 on: October 26, 2009, 07:51:33 AM »
Tagging along.  I want to watch this one.
Logged
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: Project "Low Brow"
« Reply #11 on: October 26, 2009, 09:22:44 AM »
must be nice to get a free bike... ;D
Logged

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,276
Re: Project "Low Brow"
« Reply #12 on: October 26, 2009, 09:38:02 AM »
Quote from: Spikeybike on October 25, 2009, 11:46:12 AM



this is what happens when you don't prep good before you do a tank liner


I was stuck on these two pics for bit wondering what you were doing.  It finally came to me.  Your hand is inside the tank - you cut the sides of the tank out.  Kewl.
Logged
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #13 on: October 26, 2009, 04:00:18 PM »
Quote from: mkramer1121 on October 26, 2009, 09:22:44 AM
must be nice to get a free bike... ;D

 ;D ;D ;D ;D it is .... it really is


thanx again man
Logged

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Project "Low Brow"
« Reply #14 on: October 26, 2009, 04:35:06 PM »
Tank looks great!

What did you cut it with?

Can't you run gas in your MIG?  Way less painful than fluxcore imho.

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #15 on: October 26, 2009, 05:40:48 PM »
yes i could ... i got the wire , i got the hoses somewhere ... i don't got the regulator ... or a bottle

$50 vs $200  ...  50 won  ;D ;D ;D


and it was cut with two cut-off wheels  one 4" and one 2 1/2 " except the parts where the bondo is really thick was cut with a jigsaw (wheel didn't reach the bottom of the dents :o )
Logged

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Project "Low Brow"
« Reply #16 on: October 26, 2009, 07:50:53 PM »
You are a wizard with metal that's for sure.  I tip my virtual hat to you.

BTW, JB Weld has gotta be the world's most expensive body filler, but it'll never shrink or fall off lol!  :)

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #17 on: October 27, 2009, 12:27:12 AM »
i thank you sir , and not only is JB more expensive but man that stuff takes forever to sand 

did a lil more work tonight .. but not really .. mostly just staring at it ,




even tho the seat is very similar to my last one, it's a two seater so i gotta mount it totally diffurrt


.......it's a thinker
Logged

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: Project "Low Brow"
« Reply #18 on: October 27, 2009, 03:29:44 AM »
attach the seat to a pan with hinges or welded-in bolts and stick the pan to the bike?
Logged
everything I say is pure speculation and
I have no idea what I'm talking about  ._.

                                    Marla              .:71CB750:.CAFE

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,149
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Project "Low Brow"
« Reply #19 on: October 27, 2009, 04:19:25 AM »
Seat pan idea...  Make the pan out of metal, let the four "corners" extend out the sides and wrap around the frame rails like spring clips. 

benefit...no protruding hinge or latch hardware
Logged
intrigued by the wail...seduced by the scream.

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: Project "Low Brow"
« Reply #20 on: October 27, 2009, 04:40:45 AM »
Another project from Spikeybike. I'm in!

I like what you've got so far.
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

Offline MacM2010

  • Nobody Special
  • Enthusiast
  • **
  • Posts: 181
Re: Project "Low Brow"
« Reply #21 on: October 27, 2009, 09:50:14 AM »
Really like the seat idea - a 2-up cafe-style seat is something I'd like to figure out, eventually.  Keep up the good work.
Logged
One day, I will put up a signature.

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,276
Re: Project "Low Brow"
« Reply #22 on: October 27, 2009, 10:07:24 AM »
Quote from: Spikeybike on October 25, 2009, 06:58:22 PM
my lil helper  ;D ;D





And I thought my balls were big!  That's kewl that you have that much trust in your boy at that age (even though you were standing right there).
Logged
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #23 on: October 27, 2009, 11:05:18 AM »
Quote from: Industrial Cafe on October 27, 2009, 03:29:44 AM
attach the seat to a pan with hinges or welded-in bolts and stick the pan to the bike?

thats what i did for my seat on the Phoenix i used the bolts as pegs (check the "before the fire" thread in my sig), .. but for this i need the rear to be more secure , i've already made the pan, thats a no brainer. attaching it securely in the front and rear with everything hidden . is gonna be a little bit of a pain

i was thinking maybe bolts , with wingnuts from the bottom .. but .. that just seems kinda half assed

Quote from: TipperT on October 27, 2009, 10:07:24 AM
And I thought my balls were big!  That's kewl that you have that much trust in your boy at that age (even though you were standing right there).

thats not his first time by far my man , he would come to my work with his mom, waiting for me to get off ..and chill at the end of my table with an auto shield on just watching , he just started actually welding about 5 or 6 months ago (right around his 5th b'day) .. he can do lil 1/4" beads (they're so f'n cute, cracks me up) soon enough he'll be buildin some crazy #$%*  ;D  you should see some of his lego creations  ;)

« Last Edit: October 27, 2009, 11:15:44 AM by Spikeybike »
Logged

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: Project "Low Brow"
« Reply #24 on: October 27, 2009, 11:19:58 AM »
he begged me .. actually begged , to help with some of the grinding .. that had me a lil nervous at first, but he was totally comfortable with it.. (don't worry he had ear plugs and a full face shield )
Logged
Pages: [1] 2 3 4   Go Up
« previous next »