Author Topic: Megacycle 125-65..75 cam buy. (Read 5549 times)

MRieck · « **on:** October 25, 2009, 06:31:19 PM »

How many guys want these cams. I will be speaking with Megacycle on Tuesday or Wednesday. I will need a deposit.
Mike

Bill/BentON Racing · « **Reply #1 on:** October 25, 2009, 08:22:04 PM »

Mike,I want a 75,how to pay?,Thanks,Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2 on:** October 25, 2009, 08:53:49 PM »

I'm in for one 75.

mick7504 · « **Reply #3 on:** October 25, 2009, 10:02:52 PM »

G'day Mike
Can you can put my name on two 75's.
PM with details for payment.
Thanks mate
Mick

Retro Rocket · « **Reply #4 on:** October 25, 2009, 10:19:18 PM »

Mike, can you post specs for both cams please mate, still haven't made up my mind on which one to run. Do they have a different point at which they produce peak horse power?

Sorry, i'm not that up to scratch on cams....

Mick

HawaiiMike · « **Reply #5 on:** October 25, 2009, 11:09:58 PM »

How about a 126-00 for CB550's? I'd like one.

mick7504 · « **Reply #6 on:** October 25, 2009, 11:22:29 PM »

Quote from: retro rocket on October 25, 2009, 10:19:18 PM

Mike, can you post specs for both cams please mate, still haven't made up my mind on which one to run. Do they have a different point at which they produce peak horse power?

Sorry, i'm not that up to scratch on cams....

Mick

There's some reading here Mick if that helps at all.
www.satanicmechanic.org/megacyclecam.shtml

Jerry Rxman Griffin aka MuthaF'er · « **Reply #7 on:** October 25, 2009, 11:42:10 PM »

http://www.megacyclecams.com/catalog/pages/page%2034.pdf

The 125-60 is the hard weld replacement for the 125-65 (same cam)
" 125-70 " 125-75 "

When Megacycle ran out of the billets to grind these cams the only solution for a while was to send in your existing cam and they would weld on material then regrind to the original specs. Thus the different numbers.

MRieck · « **Reply #8 on:** October 26, 2009, 07:22:57 AM »

Quote from: retro rocket on October 25, 2009, 10:19:18 PM

Mike, can you post specs for both cams please mate, still haven't made up my mind on which one to run. Do they have a different point at which they produce peak horse power?

Sorry, i'm not that up to scratch on cams....

Mick

I'd go with the 125-75 with the 1000cc kit Mick

MRieck · « **Reply #9 on:** October 26, 2009, 07:28:20 AM »

so...I have 5 125-75's if I include one for Mick(RetroRocket). A 75.00 0r 100.00 deposit would be great. My PayPal account email is jmrieck1@comcast.net (it's under my avatar as well). Please give your screen name as well as any special shipping instructions etc. I believe we can get a really good price considering I already have 1,500.00 worth of cam stuff coming from them.
HawaiiMike....that's a hardweld cam and requires a core. PM me.
Mike

ColinMc · « **Reply #10 on:** October 26, 2009, 08:46:26 AM »

Ballpark how much will the cams end up being? What kind of a motor build up is recommended for either of these? I would probably snag the milder of the two for now and build a spare motor up to use it later...but I guess it depends...

simon#42 · « **Reply #11 on:** October 26, 2009, 11:14:11 AM »

i will have a 125-65 please mike

MRieck · « **Reply #12 on:** October 26, 2009, 02:41:06 PM »

No problem Simon. Please refer to my previous post about down payment. I will be contacting Megacycle tomorrow and tell Barbara I will have a set number of cams come this Friday 10/30. Does that work for people?
Mike

Retro Rocket · « **Reply #13 on:** October 26, 2009, 03:26:30 PM »

Ok Mike, i will go with the 125-75 please.

Mick

MRieck · « **Reply #14 on:** October 26, 2009, 05:31:10 PM »

Quote from: retro rocket on October 26, 2009, 03:26:30 PM

Ok Mike, i will go with the 125-75 please.

Mick

OK Mick

Jerry Rxman Griffin aka MuthaF'er · « **Reply #15 on:** October 26, 2009, 05:46:15 PM »

$100.00 sent, James.

Gerald

Bill/BentON Racing · « **Reply #16 on:** October 26, 2009, 06:05:23 PM »

$100.00 sent,money well spent....both times!

,Bill

mick7504 · « **Reply #17 on:** October 26, 2009, 06:37:50 PM »

$100:00 US sent Mike
Regards
Mick

Jerry Rxman Griffin aka MuthaF'er · « **Reply #18 on:** October 27, 2009, 08:30:34 PM »

You boys better get in while the getting is good.

Thanks again Mike.

Retro Rocket · « **Reply #19 on:** October 27, 2009, 09:29:17 PM »

Your not a car salesman by any chance are you Jerry.?........

Mick

Jerry Rxman Griffin aka MuthaF'er · « **Reply #20 on:** October 27, 2009, 10:19:23 PM »

No, I can only sell things I believe in

I do believe in supporting our causes and the good people that have the knowledge and ability to further the lost or almost lost art of SOHC4 before it's too late.

We've managed to make things happen lately partly with my help and the support of all the members. I want to see this continue.

Retro Rocket · « **Reply #21 on:** October 28, 2009, 04:16:01 AM »

Quote from: Jerry Rxman Griffin on October 27, 2009, 10:19:23 PM

No, I can only sell things I believe in

I do believe in supporting our causes and the good people that have the knowledge and ability to further the lost or almost lost art of SOHC4 before it's too late.

We've managed to make things happen lately partly with my help and the support of all the members. I want to see this continue.

+100%

Mick

Bill/BentON Racing · « **Reply #22 on:** October 28, 2009, 05:20:41 AM »

Quote from: Jerry Rxman Griffin on October 27, 2009, 10:19:23 PM

No, I can only sell things I believe in

I do believe in supporting our causes and the good people that have the knowledge and ability to further the lost or almost lost art of SOHC4 before it's too late.

We've managed to make things happen lately partly with my help and the support of all the members. I want to see this continue.

Don't we all ? This forum and the people #1!!!!!!!!!!,Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #23 on:** November 04, 2009, 03:24:00 PM »

Mike,

Any word?

Jerry

MRieck · « **Reply #24 on:** November 04, 2009, 04:09:26 PM »

I have 2 orders coming Jerry. Megacycle has to hardweld 1 of the 3 cams I sent (for ttr400) and the other hardwelds will be in the next order. I took the 4 75 billet cams they had in stock. There is also a 65 cam coming with the order. I'm waiting for the hardweld to be completed and the check I sent to clear. I hope to have the order in a couple of weeks.

News:

Author Topic: Megacycle 125-65..75 cam buy. (Read 5549 times)