Hi im new to this and have a couple of 78 cb750f2 . I am doing a bottom and top rebuild and found a pin on the floor and dont know where its from. any help would be appreciated.
its 4mm by 6.8mm.
I have looked through the parts catalougue. Its to short to from the gear selector and i dont think it came from the oil pump is there anywhere else it could be from. i have searched everywhere and am a bit reluctent to put motor fully back together untill i know where its from. Do you have to pull the pump apart to get to the pin. all i did was remove the pump removed the screen and cleaned it.